[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251117015943.2858-1-jun.guo@cixtech.com>
Date: Mon, 17 Nov 2025 09:59:40 +0800
From: Jun Guo <jun.guo@...tech.com>
To: peter.chen@...tech.com,
fugang.duan@...tech.com,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
vkoul@...nel.org,
ychuang3@...oton.com,
schung@...oton.com,
robin.murphy@....com
Cc: dmaengine@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
cix-kernel-upstream@...tech.com,
linux-arm-kernel@...ts.infradead.org,
Jun Guo <jun.guo@...tech.com>
Subject: [PATCH 0/3] dmaengine: arm-dma350: add support for shared interrupt mode
The arm dma350 controller's hardware implementation varies: some
designs dedicate a separate interrupt line for each channel, while
others have all channels sharing a single interrupt.This patch adds
support for the hardware design where all DMA channels share a
single interrupt.
This series introduces the following enhancements for arm dma350
controller support on arm64 platforms:
Patch 1: Add a compatible string "cix,sky1-dma-350" for the cix
sky1 SoC.
Patch 2: Implement support for the shared interrupt design of the DMA
controller.
Patch 3: add DT nodes for DMA.
The patches have been tested on CIX SKY1 platform, the test steps are
as follows:
% echo 2000 > /sys/module/dmatest/parameters/timeout
% echo 1 > /sys/module/dmatest/parameters/iterations
% echo " " > /sys/module/dmatest/parameters/channel
% echo 1 > /sys/module/dmatest/parameters/run
Jun Guo (3):
dt-bindings: dma: arm-dma350: update DT binding docs
dma: arm-dma350: add support for shared interrupt mode
arm64: dts: cix: add DT nodes for DMA
.../devicetree/bindings/dma/arm,dma-350.yaml | 6 +-
arch/arm64/boot/dts/cix/sky1.dtsi | 7 ++
drivers/dma/arm-dma350.c | 115 ++++++++++++++++--
3 files changed, 117 insertions(+), 11 deletions(-)
--
2.34.1
Powered by blists - more mailing lists