linux-kernel - Re: [PATCH v7 2/2] usb: typec: hd3ss3220: Enable VBUS based on ID pin state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <aRrf9nzjYbR8esUm@kuha.fi.intel.com>
Date: Mon, 17 Nov 2025 10:42:30 +0200
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Krishna Kurapati <krishna.kurapati@....qualcomm.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Biju Das <biju.das.jz@...renesas.com>,
	Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
	linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 2/2] usb: typec: hd3ss3220: Enable VBUS based on ID
 pin state

Tue, Nov 11, 2025 at 12:50:25PM +0530, Krishna Kurapati kirjoitti:
> There is a ID pin present on HD3SS3220 controller that can be routed
> to SoC. As per the datasheet:
> 
> "Upon detecting a UFP device, HD3SS3220 will keep ID pin high if VBUS is
> not at VSafe0V. Once VBUS is at VSafe0V, the HD3SS3220 will assert ID pin
> low. This is done to enforce Type-C requirement that VBUS must be at
> VSafe0V before re-enabling VBUS"
> 
> Add support to read the ID pin state and enable VBUS accordingly.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@....qualcomm.com>

Reviewed-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>

> ---
>  drivers/usb/typec/hd3ss3220.c | 75 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 73 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
> index 3ecc688dda82..3876f4faead6 100644
> --- a/drivers/usb/typec/hd3ss3220.c
> +++ b/drivers/usb/typec/hd3ss3220.c
> @@ -15,6 +15,9 @@
>  #include <linux/usb/typec.h>
>  #include <linux/delay.h>
>  #include <linux/workqueue.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/of_graph.h>
>  
>  #define HD3SS3220_REG_CN_STAT		0x08
>  #define HD3SS3220_REG_CN_STAT_CTRL	0x09
> @@ -54,6 +57,11 @@ struct hd3ss3220 {
>  	struct delayed_work output_poll_work;
>  	enum usb_role role_state;
>  	bool poll;
> +
> +	struct gpio_desc *id_gpiod;
> +	int id_irq;
> +
> +	struct regulator *vbus;
>  };
>  
>  static int hd3ss3220_set_power_opmode(struct hd3ss3220 *hd3ss3220, int power_opmode)
> @@ -319,13 +327,33 @@ static const struct regmap_config config = {
>  	.max_register = 0x0A,
>  };
>  
> +static irqreturn_t hd3ss3220_id_isr(int irq, void *dev_id)
> +{
> +	struct hd3ss3220 *hd3ss3220 = dev_id;
> +	int ret;
> +	int id;
> +
> +	id = gpiod_get_value_cansleep(hd3ss3220->id_gpiod);
> +	if (!id)
> +		ret = regulator_enable(hd3ss3220->vbus);
> +	else
> +		ret = regulator_disable(hd3ss3220->vbus);
> +
> +	if (ret)
> +		dev_err(hd3ss3220->dev,
> +			"vbus regulator %s failed: %d\n", id ? "disable" : "enable", ret);
> +
> +	return IRQ_HANDLED;
> +}
> +
>  static int hd3ss3220_probe(struct i2c_client *client)
>  {
>  	struct typec_capability typec_cap = { };
> -	struct hd3ss3220 *hd3ss3220;
>  	struct fwnode_handle *connector, *ep;
> -	int ret;
> +	struct hd3ss3220 *hd3ss3220;
> +	struct regulator *vbus;
>  	unsigned int data;
> +	int ret;
>  
>  	hd3ss3220 = devm_kzalloc(&client->dev, sizeof(struct hd3ss3220),
>  				 GFP_KERNEL);
> @@ -359,6 +387,49 @@ static int hd3ss3220_probe(struct i2c_client *client)
>  		goto err_put_fwnode;
>  	}
>  
> +	vbus = devm_of_regulator_get_optional(hd3ss3220->dev,
> +					      to_of_node(connector),
> +					      "vbus");
> +	if (IS_ERR(vbus) && vbus != ERR_PTR(-ENODEV)) {
> +		ret = PTR_ERR(vbus);
> +		dev_err(hd3ss3220->dev, "failed to get vbus: %d", ret);
> +		goto err_put_fwnode;
> +	}
> +
> +	hd3ss3220->vbus = (vbus == ERR_PTR(-ENODEV) ? NULL : vbus);
> +
> +	if (hd3ss3220->vbus) {
> +		hd3ss3220->id_gpiod = devm_gpiod_get_optional(hd3ss3220->dev,
> +							      "id",
> +							      GPIOD_IN);
> +		if (IS_ERR(hd3ss3220->id_gpiod)) {
> +			ret = PTR_ERR(hd3ss3220->id_gpiod);
> +			goto err_put_fwnode;
> +		}
> +	}
> +
> +	if (hd3ss3220->id_gpiod) {
> +		hd3ss3220->id_irq = gpiod_to_irq(hd3ss3220->id_gpiod);
> +		if (hd3ss3220->id_irq < 0) {
> +			ret = hd3ss3220->id_irq;
> +			dev_err(hd3ss3220->dev,
> +				"failed to get ID gpio: %d\n",
> +				hd3ss3220->id_irq);
> +			goto err_put_fwnode;
> +		}
> +
> +		ret = devm_request_threaded_irq(hd3ss3220->dev,
> +						hd3ss3220->id_irq, NULL,
> +						hd3ss3220_id_isr,
> +						IRQF_TRIGGER_RISING |
> +						IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +						dev_name(hd3ss3220->dev), hd3ss3220);
> +		if (ret < 0) {
> +			dev_err(hd3ss3220->dev, "failed to get ID irq: %d\n", ret);
> +			goto err_put_fwnode;
> +		}
> +	}
> +
>  	typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
>  	typec_cap.driver_data = hd3ss3220;
>  	typec_cap.type = TYPEC_PORT_DRP;
> -- 
> 2.34.1

-- 
heikki