linux-kernel - [PATCH v3 0/2] Add support for NXP XSPI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251118-xspi-v3-0-6d3a91b68c7e@nxp.com>
Date: Tue, 18 Nov 2025 11:34:15 +0800
From: Haibo Chen <haibo.chen@....com>
To: Han Xu <han.xu@....com>, Mark Brown <broonie@...nel.org>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, 
 Sascha Hauer <s.hauer@...gutronix.de>, 
 Pengutronix Kernel Team <kernel@...gutronix.de>, 
 Fabio Estevam <festevam@...il.com>
Cc: linux-spi@...r.kernel.org, imx@...ts.linux.dev, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, Haibo Chen <haibo.chen@....com>, 
 Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH v3 0/2] Add support for NXP XSPI

XSPI is a flexible SPI host controller which supports up to
2 external devices (2 CS). It support Single/Dual/Quad/Octal
mode data transfer.

The difference between XSPI and Flexspi is XSPI support
multiple independent execution environments (EENVs) for HW
virtualization with some limitations. Each EENV has its own
interrupt and its own set of programming registers that exists
in a specific offset range in the XSPI memory map.
The main environment (EENV0) address space contains all of the
registers for controlling EENV0 plus all of the general XSPI
control and programming registers. The register mnemonics for
the user environments (EENV1 to EENV4) have "_SUB_n" appended
to the mnemonic for the corresponding main-environment register.

Current driver based on EENV0, which means system already give
EENV0 right to linux.

This driver use SPI memory interface of the SPI framework to issue
flash memory operations. Tested this driver with mtd_debug and
UBIFS on NXP i.MX943 EVK board which has one MT35XU512ABA spi nor
flash. NOw this driver has the following key features:
- Support up to OCT DDR mode
- Support AHB read
- Support IP read and IP write
- Support two CS

Signed-off-by: Haibo Chen <haibo.chen@....com>
---
Changes in v3:
- PATCH 1: fix the messed ordering in MAINTAINERS, add Krzysztof's ack
- PATCH 2: fix some typo, and add IRQ_NONE in nxp_xspi_irq_handler()
	   also add {} for else when the if has {}
- Link to v2: https://lore.kernel.org/r/20251117-xspi-v2-0-e651323993fe@nxp.com

Changes in v2:
- PATCH 1: re-name the yaml file, and correct the compatible string and reg in the example to pass binding check.
- PATCH 2: involve changes according to Frank's comments 
           - use GENMASK and FIELD_PREP
           - remove little endian, use readl/writel/read_poll_timeout directly
	   - use fsleep instead of udelay
	   - remove pm_runtime_mark_last_busy()
	   - keep one style to use up case
	   - use SYSTEM_SLEEP_PM_OPS/RUNTIME_PM_OPS
- Link to v1: https://lore.kernel.org/r/20251104-xspi-v1-0-1502847ade40@nxp.com

---
Haibo Chen (2):
      dt-bindings: spi: Document imx94 xspi
      spi: add driver for NXP XSPI controller

 .../devicetree/bindings/spi/nxp,imx94-xspi.yaml    |   88 ++
 MAINTAINERS                                        |    9 +
 drivers/spi/Kconfig                                |   10 +
 drivers/spi/Makefile                               |    1 +
 drivers/spi/spi-nxp-xspi.c                         | 1367 ++++++++++++++++++++
 5 files changed, 1475 insertions(+)
---
base-commit: 0f2995693867bfb26197b117cd55624ddc57582f
change-id: 20251028-xspi-afc0a17e9708

Best regards,
-- 
Haibo Chen <haibo.chen@....com>