Message-ID: <691dd074.a70a0220.2ea503.001a.GAE@google.com>
Date: Wed, 19 Nov 2025 06:13:08 -0800
From: syzbot <syzbot+ad45f827c88778ff7df6@...kaller.appspotmail.com>
To: brauner@...nel.org, frank.li@...o.com, glaubitz@...sik.fu-berlin.de, 
	linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org, 
	mehdi.benhadjkhelifa@...il.com, slava@...eyko.com, 
	syzkaller-bugs@...glegroups.com
Subject: Re: [syzbot] [hfs?] memory leak in hfs_init_fs_context

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

pc

SYZFAIL: failed to recv rpc
fd=3 want=4 recv=0 n=0 (errno 9: Bad file descriptor)


Warning: Permanently added '10.128.10.29' (ED25519) to the list of known hosts.
2025/11/19 14:11:52 parsed 1 programs
[   42.022753][ T5811] cgroup: Unknown subsys name 'net'
[   42.175712][ T5811] cgroup: Unknown subsys name 'cpuset'
[   42.182256][ T5811] cgroup: Unknown subsys name 'rlimit'
Setting up swapspace version 1, size = 127995904 bytes
[   50.184013][ T5811] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k 
[   51.419720][ T5824] soft_limit_in_bytes is deprecated and will be removed. Please report your usecase to linux-mm@...ck.org if you depend on this functionality.
[   51.816926][   T58] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   51.825249][   T58] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   51.836771][   T31] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   51.844633][   T31] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   51.992800][ T5887] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   52.000051][ T5887] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   52.007203][ T5887] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   52.014500][ T5887] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   52.021816][ T5887] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   52.104921][ T5895] chnl_net:caif_netlink_parms(): no params data found
[   52.123774][ T5895] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.130962][ T5895] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.138313][ T5895] bridge_slave_0: entered allmulticast mode
[   52.144523][ T5895] bridge_slave_0: entered promiscuous mode
[   52.151904][ T5895] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.159070][ T5895] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.166257][ T5895] bridge_slave_1: entered allmulticast mode
[   52.172607][ T5895] bridge_slave_1: entered promiscuous mode
[   52.184675][ T5895] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.194790][ T5895] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.210335][ T5895] team0: Port device team_slave_0 added
[   52.216530][ T5895] team0: Port device team_slave_1 added
[   52.226332][ T5895] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.233294][ T5895] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   52.259593][ T5895] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.270857][ T5895] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.277950][ T5895] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   52.304091][ T5895] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   52.330778][ T5895] hsr_slave_0: entered promiscuous mode
[   52.337739][ T5895] hsr_slave_1: entered promiscuous mode
[   52.365548][ T5895] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   52.373816][ T5895] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   52.382570][ T5895] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   52.390442][ T5895] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   52.402050][ T5895] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.409208][ T5895] bridge0: port 2(bridge_slave_1) entered forwarding state
[   52.416560][ T5895] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.424189][ T5895] bridge0: port 1(bridge_slave_0) entered forwarding state
[   52.442787][ T5895] 8021q: adding VLAN 0 to HW filter on device bond0
[   52.452023][   T31] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.461111][   T31] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.470558][ T5895] 8021q: adding VLAN 0 to HW filter on device team0
[   52.479109][   T31] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.486350][   T31] bridge0: port 1(bridge_slave_0) entered forwarding state
[   52.496004][ T2979] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.503421][ T2979] bridge0: port 2(bridge_slave_1) entered forwarding state
[   52.520122][ T5895] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   52.531213][ T5895] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   52.567709][ T5895] 8021q: adding VLAN 0 to HW filter on device batadv0
[   52.582539][ T5895] veth0_vlan: entered promiscuous mode
[   52.589714][ T5895] veth1_vlan: entered promiscuous mode
[   52.600093][ T5895] veth0_macvtap: entered promiscuous mode
[   52.606771][ T5895] veth1_macvtap: entered promiscuous mode
[   52.615855][ T5895] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.625167][ T5895] batman_adv: batadv0: Interface activated: batadv_slave_1
[   52.634137][   T58] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   52.642907][   T58] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   52.652172][   T58] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   52.661018][   T58] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   52.696362][   T35] netdevsim netdevsim0 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   52.736176][   T35] netdevsim netdevsim0 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   52.776000][   T35] netdevsim netdevsim0 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
2025/11/19 14:12:05 executed programs: 0
[   52.826029][   T35] netdevsim netdevsim0 netdevsim0 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   55.913007][   T35] bridge_slave_1: left allmulticast mode
[   55.924242][   T35] bridge_slave_1: left promiscuous mode
[   55.930898][   T35] bridge0: port 2(bridge_slave_1) entered disabled state
[   55.939182][   T35] bridge_slave_0: left allmulticast mode
[   55.945141][   T35] bridge_slave_0: left promiscuous mode
[   55.951004][   T35] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.026188][   T35] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[   56.036592][   T35] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[   56.046139][   T35] bond0 (unregistering): Released all slaves
[   56.106597][   T35] hsr_slave_0: left promiscuous mode
[   56.112214][   T35] hsr_slave_1: left promiscuous mode
[   56.118098][   T35] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[   56.126443][   T35] batman_adv: batadv0: Removing interface: batadv_slave_0
[   56.133898][   T35] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[   56.141694][   T35] batman_adv: batadv0: Removing interface: batadv_slave_1
[   56.150927][   T35] veth1_macvtap: left promiscuous mode
[   56.157067][   T35] veth0_macvtap: left promiscuous mode
[   56.163187][   T35] veth1_vlan: left promiscuous mode
[   56.168965][   T35] veth0_vlan: left promiscuous mode
[   56.196836][   T35] team0 (unregistering): Port device team_slave_1 removed
[   56.205815][   T35] team0 (unregistering): Port device team_slave_0 removed
[   58.084150][ T5133] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   58.091289][ T5133] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   58.098477][ T5133] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   58.105739][ T5133] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   58.112872][ T5133] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   58.147089][ T5988] chnl_net:caif_netlink_parms(): no params data found
[   58.166338][ T5988] bridge0: port 1(bridge_slave_0) entered blocking state
[   58.173578][ T5988] bridge0: port 1(bridge_slave_0) entered disabled state
[   58.180784][ T5988] bridge_slave_0: entered allmulticast mode
[   58.187051][ T5988] bridge_slave_0: entered promiscuous mode
[   58.193583][ T5988] bridge0: port 2(bridge_slave_1) entered blocking state
[   58.200740][ T5988] bridge0: port 2(bridge_slave_1) entered disabled state
[   58.207833][ T5988] bridge_slave_1: entered allmulticast mode
[   58.214030][ T5988] bridge_slave_1: entered promiscuous mode
[   58.225238][ T5988] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   58.235910][ T5988] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   58.251413][ T5988] team0: Port device team_slave_0 added
[   58.257776][ T5988] team0: Port device team_slave_1 added
[   58.267463][ T5988] batman_adv: batadv0: Adding interface: batadv_slave_0
[   58.274482][ T5988] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   58.300974][ T5988] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   58.311990][ T5988] batman_adv: batadv0: Adding interface: batadv_slave_1
[   58.318969][ T5988] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   58.344994][ T5988] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   58.362193][ T5988] hsr_slave_0: entered promiscuous mode
[   58.368062][ T5988] hsr_slave_1: entered promiscuous mode
[   58.548290][ T5988] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   58.556831][ T5988] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   58.564665][ T5988] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   58.572522][ T5988] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   58.586118][ T5988] bridge0: port 2(bridge_slave_1) entered blocking state
[   58.593280][ T5988] bridge0: port 2(bridge_slave_1) entered forwarding state
[   58.600654][ T5988] bridge0: port 1(bridge_slave_0) entered blocking state
[   58.607726][ T5988] bridge0: port 1(bridge_slave_0) entered forwarding state
[   58.630191][ T5988] 8021q: adding VLAN 0 to HW filter on device bond0
[   58.640402][   T58] bridge0: port 1(bridge_slave_0) entered disabled state
[   58.649632][   T58] bridge0: port 2(bridge_slave_1) entered disabled state
[   58.659837][ T5988] 8021q: adding VLAN 0 to HW filter on device team0
[   58.669532][   T58] bridge0: port 1(bridge_slave_0) entered blocking state
[   58.676712][   T58] bridge0: port 1(bridge_slave_0) entered forwarding state
[   58.686492][   T35] bridge0: port 2(bridge_slave_1) entered blocking state
[   58.693655][   T35] bridge0: port 2(bridge_slave_1) entered forwarding state
[   58.709390][ T5988] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   58.720129][ T5988] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   58.769091][ T5988] 8021q: adding VLAN 0 to HW filter on device batadv0
[   58.787789][ T5988] veth0_vlan: entered promiscuous mode
[   58.795800][ T5988] veth1_vlan: entered promiscuous mode
[   58.808550][ T5988] veth0_macvtap: entered promiscuous mode
[   58.816434][ T5988] veth1_macvtap: entered promiscuous mode
[   58.826869][ T5988] batman_adv: batadv0: Interface activated: batadv_slave_0
[   58.837590][ T5988] batman_adv: batadv0: Interface activated: batadv_slave_1
[   58.847552][ T2979] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   58.862969][ T2979] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   58.881016][ T2979] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   58.894676][   T35] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.903471][   T35] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
SYZFAIL: failed to recv rpc
fd=3 want=4 recv=0 n=0 (errno 9: Bad file descriptor)
[   58.917260][   T31] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.925507][ T2979] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   58.934333][   T31] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50


syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build3582148735=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.24.4'
GOWORK=''
PKG_CONFIG='pkg-config'

git status (err=<nil>)
HEAD detached at 4e1406b4d
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=4e1406b4defac0e2a9d9424c70706f79a7750cf3 -X github.com/google/syzkaller/prog.gitRevisionDate=20251106-151142"  ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=4e1406b4defac0e2a9d9424c70706f79a7750cf3 -X github.com/google/syzkaller/prog.gitRevisionDate=20251106-151142"  ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=4e1406b4defac0e2a9d9424c70706f79a7750cf3 -X github.com/google/syzkaller/prog.gitRevisionDate=20251106-151142"  -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_amd64
g++ -o ./bin/linux_amd64/syz-executor executor/executor.cc \
	-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include   -DGOOS_linux=1 -DGOARCH_amd64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"4e1406b4defac0e2a9d9424c70706f79a7750cf3\"
/usr/bin/ld: /tmp/ccMkllK7.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x104): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=10715332580000


Tested on:

commit:         058747ce hfs: ensure sb->s_fs_info is always cleaned up
git tree:       https://github.com/brauner/linux.git work.hfs.fixes
kernel config:  https://syzkaller.appspot.com/x/.config?x=f30cc590c4f6da44
dashboard link: https://syzkaller.appspot.com/bug?extid=ad45f827c88778ff7df6
compiler:       gcc (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40

Note: no patches were applied.

Powered by blists - more mailing lists