| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4090a47c-2208-486b-bd96-47518d7aa90c@linaro.org>
Date: Thu, 20 Nov 2025 13:52:03 +0000
From: James Clark <james.clark@...aro.org>
To: Mike Leach <mike.leach@...aro.org>
Cc: Suzuki K Poulose <suzuki.poulose@....com>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
Jonathan Corbet <corbet@....net>, Leo Yan <leo.yan@....com>,
Randy Dunlap <rdunlap@...radead.org>, coresight@...ts.linaro.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org
Subject: Re: [PATCH v5 03/13] coresight: Refactor
etm4_config_timestamp_event()
On 20/11/2025 1:04 pm, Mike Leach wrote:
> Hi James
>
> On Tue, 18 Nov 2025 at 16:28, James Clark <james.clark@...aro.org> wrote:
>>
>> Remove some of the magic numbers and try to clarify some of the
>> documentation so it's clearer how this sets up the timestamp interval.
>>
>> Return errors directly instead of jumping to out and returning ret,
>> nothing needs to be cleaned up at the end and it only obscures the flow
>> and return value.
>>
>> Reviewed-by: Leo Yan <leo.yan@....com>
>> Signed-off-by: James Clark <james.clark@...aro.org>
>> ---
>> drivers/hwtracing/coresight/coresight-etm4x-core.c | 96 ++++++++++++++--------
>> drivers/hwtracing/coresight/coresight-etm4x.h | 23 ++++--
>> 2 files changed, 81 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
>> index 560975b70474..5d21af346799 100644
>> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
>> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
>> @@ -642,18 +642,33 @@ static void etm4_enable_sysfs_smp_call(void *info)
>> * TRCRSCTLR1 (always true) used to get the counter to decrement. From
>> * there a resource selector is configured with the counter and the
>> * timestamp control register to use the resource selector to trigger the
>> - * event that will insert a timestamp packet in the stream.
>> + * event that will insert a timestamp packet in the stream:
>> + *
>> + * +--------------+
>> + * | Resource 1 | fixed "always-true" resource
>> + * +--------------+
>> + * |
>> + * +------v-------+
>> + * | Counter x | (reload to 1 on underflow)
>> + * +--------------+
>> + * |
>> + * +------v--------------+
>> + * | Resource Selector y | (trigger on counter x == 0)
>> + * +---------------------+
>> + * |
>> + * +------v---------------+
>> + * | Timestamp Generator | (timestamp on resource y)
>> + * +----------------------+
>> */
>> static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata)
>> {
>> - int ctridx, ret = -EINVAL;
>> - int counter, rselector;
>> - u32 val = 0;
>> + int ctridx;
>> + int rselector;
>> struct etmv4_config *config = &drvdata->config;
>>
>> /* No point in trying if we don't have at least one counter */
>> if (!drvdata->nr_cntr)
>> - goto out;
>> + return -EINVAL;
>>
>> /* Find a counter that hasn't been initialised */
>> for (ctridx = 0; ctridx < drvdata->nr_cntr; ctridx++)
>> @@ -663,15 +678,19 @@ static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata)
>> /* All the counters have been configured already, bail out */
>> if (ctridx == drvdata->nr_cntr) {
>> pr_debug("%s: no available counter found\n", __func__);
>> - ret = -ENOSPC;
>> - goto out;
>> + return -ENOSPC;
>> }
>>
>> /*
>> - * Searching for an available resource selector to use, starting at
>> - * '2' since every implementation has at least 2 resource selector.
>> - * ETMIDR4 gives the number of resource selector _pairs_,
>> - * hence multiply by 2.
>> + * Searching for an available resource selector to use, starting at '2'
>> + * since resource 0 is the fixed 'always returns false' resource and 1
>> + * is the fixed 'always returns true' resource. See IHI0064H_b '7.3.64
>> + * TRCRSCTLRn, Resource Selection Control Registers, n=2-31'. If there
>> + * are no resources, there would also be no counters so wouldn't get
>> + * here.
>> + *
>> + * ETMIDR4 gives the number of resource selector _pairs_, hence multiply
>> + * by 2.
>> */
>> for (rselector = 2; rselector < drvdata->nr_resource * 2; rselector++)
>> if (!config->res_ctrl[rselector])
>> @@ -680,13 +699,9 @@ static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata)
>> if (rselector == drvdata->nr_resource * 2) {
>> pr_debug("%s: no available resource selector found\n",
>> __func__);
>> - ret = -ENOSPC;
>> - goto out;
>> + return -ENOSPC;
>> }
>>
>> - /* Remember what counter we used */
>> - counter = 1 << ctridx;
>> -
>> /*
>> * Initialise original and reload counter value to the smallest
>> * possible value in order to get as much precision as we can.
>> @@ -694,26 +709,41 @@ static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata)
>> config->cntr_val[ctridx] = 1;
>> config->cntrldvr[ctridx] = 1;
>>
>> - /* Set the trace counter control register */
>> - val = 0x1 << 16 | /* Bit 16, reload counter automatically */
>> - 0x0 << 7 | /* Select single resource selector */
>> - 0x1; /* Resource selector 1, i.e always true */
>> -
>> - config->cntr_ctrl[ctridx] = val;
>> -
>> - val = 0x2 << 16 | /* Group 0b0010 - Counter and sequencers */
>> - counter << 0; /* Counter to use */
>> -
>> - config->res_ctrl[rselector] = val;
>> + /*
>> + * Trace Counter Control Register TRCCNTCTLRn
>> + *
>> + * CNTCHAIN = 0, don't reload on the previous counter
>> + * RLDSELF = true, reload counter automatically on underflow
>> + * RLDTYPE = 0, one reload input resource
>
> These field descriptions should match the terminology in the spec -
> and this is not field in this register as defined in the spec - nor
> are the following really. The event format is generic - so need a
> event select macro, which is then applied to any register that needs
> it
>
>> + * RLDSEL = RES_SEL_FALSE (0), reload on false resource (never reload)
>> + * CNTTYPE = 0, one count input resource
>
>
>> + * CNTSEL = RES_SEL_TRUE (1), count fixed 'always true' resource (always decrement)
>> + */
Hmmm not sure where they came from. I think I got stuck trying to decide
on which format to use because the ETM spec and Arm ARM are slightly
different. I tried to settle on the Arm ARM (because this code is also
for ETE, it's newer, and there was existing code that matched its style)
but didn't copy that properly either. It should be:
CNTCHAIN
RLDSELF
RLDEVENT_TYPE
RLDEVENT_SEL
CNTEVENT_TYPE
CNTEVENT_SEL
Some are correct but some need updating.
>> + config->cntr_ctrl[ctridx] = TRCCNTCTLRn_RLDSELF |
>> + FIELD_PREP(TRCCNTCTLRn_RLDSEL_MASK, ETM_RES_SEL_FALSE) |
>> + FIELD_PREP(TRCCNTCTLRn_CNTSEL_MASK, ETM_RES_SEL_TRUE);
>>
>
> So if we define generic event generators:-
>
> #define ETM4_SEL_RS_PAIR BIT(7)
> #defiine ETM4_RS_SEL_EVENT_SINGLE(rs_sel_idx) (GENMASK(4:0) & rs_sel_idx)
> #define ETM4_RS_SEL_EVENT_PAIR(rs_sel_pair_idx) ((GENMASK(3:0) &
> rs_sel_pair_idx) | ETM4_SEL_RS_PAIR)
>
> these are then reuseable for all registers that need the 8 bit event
> selectors, beyond just this register.
>
> Thus we now accurately define the fields in the TRCCNTCTLRn
>
> #define TRCCNTCTLRn_RLDEVENT_MASK GENMASK(15, 8)
>
> and use
>
> FIELD_PREP(TRCCNTCTLRn_RLDEVENT_MASK,
> ETM4_RS_SEL_EVENT_SINGLE(ETM_RES_SEL_FALSE))
>
> etc.
>
>
I'm not sure I agree with that, the Arm ARM has CNTEVENT_TYPE as a
regular bit in the TRCCNTCTLRn register so it should be set like any
other. Hiding it as a subfield of "EVENT" when it always exists and
always does the same thing was maybe seen as a bad decision which is why
it was updated?
Also IMO, beyond using labels instead of raw numbers, the code should
just show what's programmed into the register.
ETM4_RS_SEL_EVENT_SINGLE() would be one more macro to jump through to
see what's actually happening.
>> - val = 0x0 << 7 | /* Select single resource selector */
>> - rselector; /* Resource selector */
>> + /*
>> + * Resource Selection Control Register TRCRSCTLRn
>> + *
>> + * PAIRINV = 0, INV = 0, don't invert
>> + * GROUP = 2, SELECT = ctridx, trigger when counter 'ctridx' reaches 0
>> + *
>> + * Multiple counters can be selected, and each bit signifies a counter,
>> + * so set bit 'ctridx' to select our counter.
>> + */
>> + config->res_ctrl[rselector] = FIELD_PREP(TRCRSCTLRn_GROUP_MASK, 2) |
>> + FIELD_PREP(TRCRSCTLRn_SELECT_MASK, 1 << ctridx);
>>
>> - config->ts_ctrl = val;
>> + /*
>> + * Global Timestamp Control Register TRCTSCTLR
>> + *
>> + * TYPE = 0, one input resource
>> + * SEL = rselector, generate timestamp on resource 'rselector'
>> + */
>> + config->ts_ctrl = FIELD_PREP(TRCTSCTLR_SEL_MASK, rselector);
>>
>
> FIELD_PREP(TRCTSCTLR_EVENT_MASK, ETM4_RS_SEL_EVENT_SINGLE(rselector))
>
>
>> - ret = 0;
>> -out:
>> - return ret;
>> + return 0;
>> }
>>
>> static int etm4_parse_event_config(struct coresight_device *csdev,
>> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
>> index d178d79d9827..b319335e9bc3 100644
>> --- a/drivers/hwtracing/coresight/coresight-etm4x.h
>> +++ b/drivers/hwtracing/coresight/coresight-etm4x.h
>> @@ -225,6 +225,19 @@
>> #define TRCRSCTLRn_GROUP_MASK GENMASK(19, 16)
>> #define TRCRSCTLRn_SELECT_MASK GENMASK(15, 0)
>>
>> +#define TRCCNTCTLRn_CNTCHAIN BIT(17)
>> +#define TRCCNTCTLRn_RLDSELF BIT(16)
>> +#define TRCCNTCTLRn_RLDTYPE BIT(15)
>> +#define TRCCNTCTLRn_RLDSEL_MASK GENMASK(12, 8)
> per spec this should be
> TRCCNTCTLRn_RLDEVENT_MASK GENMASK(15, 8)
>
>> +#define TRCCNTCTLRn_CNTTYPE_MASK BIT(7)
>> +#define TRCCNTCTLRn_CNTSEL_MASK GENMASK(4, 0)
>
> per spec this should be
> TRCCNTCTLRn_CNTEVENT_MASK GENMASK(7, 0)
>
>
>> +
>> +#define TRCTSCTLR_TYPE BIT(7)
>> +#define TRCTSCTLR_SEL_MASK GENMASK(4, 0)
>
> TRCTSCTLR_EVENT_MASK GENMASK(7:0)
>
>> +
>> +#define ETM_RES_SEL_FALSE 0 /* Fixed function 'always false' resource selector */
>> +#define ETM_RES_SEL_TRUE 1 /* Fixed function 'always true' resource selector */
>> +
>> /*
>> * System instructions to access ETM registers.
>> * See ETMv4.4 spec ARM IHI0064F section 4.3.6 System instructions
>> @@ -824,7 +837,7 @@ struct etmv4_config {
>> u32 eventctrl0;
>> u32 eventctrl1;
>> u32 stall_ctrl;
>> - u32 ts_ctrl;
>> + u32 ts_ctrl; /* TRCTSCTLR */
>> u32 ccctlr;
>> u32 bb_ctrl;
>> u32 vinst_ctrl;
>> @@ -837,11 +850,11 @@ struct etmv4_config {
>> u32 seq_rst;
>> u32 seq_state;
>> u8 cntr_idx;
>> - u32 cntrldvr[ETMv4_MAX_CNTR];
>> - u32 cntr_ctrl[ETMv4_MAX_CNTR];
>> - u32 cntr_val[ETMv4_MAX_CNTR];
>> + u32 cntrldvr[ETMv4_MAX_CNTR]; /* TRCCNTRLDVRn */
>> + u32 cntr_ctrl[ETMv4_MAX_CNTR]; /* TRCCNTCTLRn */
>> + u32 cntr_val[ETMv4_MAX_CNTR]; /* TRCCNTVRn */
>> u8 res_idx;
>> - u32 res_ctrl[ETM_MAX_RES_SEL];
>> + u32 res_ctrl[ETM_MAX_RES_SEL]; /* TRCRSCTLRn */
>> u8 ss_idx;
>> u32 ss_ctrl[ETM_MAX_SS_CMP];
>> u32 ss_status[ETM_MAX_SS_CMP];
>>
>> --
>> 2.34.1
>>
>
> Regards
>
> Mike
>
Powered by blists - more mailing lists