[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251119-expressatt_nfc_accel_magn_light-v1-2-636f16f05cf4@gmail.com>
Date: Wed, 19 Nov 2025 23:14:43 -0800
From: Rudraksha Gupta via B4 Relay <devnull+guptarud.gmail.com@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Rudraksha Gupta <guptarud@...il.com>
Subject: [PATCH 2/4] ARM: dts: qcom: msm8960: expressatt: Add NFC
From: Rudraksha Gupta <guptarud@...il.com>
Add pn544 NFC chip
Signed-off-by: Rudraksha Gupta <guptarud@...il.com>
---
.../dts/qcom/qcom-msm8960-samsung-expressatt.dts | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 1e331a046e7b..81806d7ca001 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -77,6 +77,27 @@ light-sensor@39 {
pinctrl-0 = <&prox_sensor_int>;
};
};
+
+ i2c-gpio-nfc {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@2b {
+ compatible = "nxp,pn544-i2c";
+ reg = <0x2b>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <106 IRQ_TYPE_EDGE_RISING>;
+ enable-gpios = <&pm8921_gpio 21 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nfc_default &nfc_enable>;
+ };
+ };
};
&gsbi5 {
@@ -182,6 +203,22 @@ touchscreen: touchscreen-int-state {
bias-disable;
drive-strength = <2>;
};
+
+ nfc_default: nfc-default-state {
+ irq-pins {
+ pins = "gpio106";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ firmware-pins {
+ pins = "gpio92";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
};
&pm8921 {
@@ -195,6 +232,15 @@ prox_sensor_int: prox-sensor-int-state {
input-enable;
bias-disable;
};
+
+ nfc_enable: nfc-enable-state {
+ pins = "gpio21";
+ function = "normal";
+ output-low;
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8921_GPIO_S4>;
+ };
};
&rpm {
--
2.51.2
Powered by blists - more mailing lists