linux-kernel - Re: [PATCH v5 01/16] dt-bindings: regulator: ROHM BD72720

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <176363264051.648957.5833707932747052681.robh@kernel.org>
Date: Thu, 20 Nov 2025 03:57:20 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Matti Vaittinen <matti.vaittinen@...ux.dev>
Cc: Matti Vaittinen <mazziesaccount@...il.com>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Linus Walleij <linus.walleij@...aro.org>, 
 Liam Girdwood <lgirdwood@...il.com>, linux-gpio@...r.kernel.org, 
 Bartosz Golaszewski <brgl@...ev.pl>, Conor Dooley <conor+dt@...nel.org>, 
 linux-leds@...r.kernel.org, linux-pm@...r.kernel.org, 
 Alexandre Belloni <alexandre.belloni@...tlin.com>, 
 devicetree@...r.kernel.org, Sebastian Reichel <sre@...nel.org>, 
 Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>, Mark Brown <broonie@...nel.org>, 
 Pavel Machek <pavel@...nel.org>, linux-clk@...r.kernel.org, 
 Matti Vaittinen <matti.vaittinen@...rohmeurope.com>, 
 Andreas Kemnade <andreas@...nade.info>, Lee Jones <lee@...nel.org>, 
 linux-rtc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 01/16] dt-bindings: regulator: ROHM BD72720


On Thu, 20 Nov 2025 10:19:40 +0200, Matti Vaittinen wrote:
> From: Matti Vaittinen <mazziesaccount@...il.com>
> 
> The ROHM BD72720 is a new PMIC with 10 BUCk and 11 LDO regulators.
> 
> The BD72720 is designed to support using the BUCK10 as a supply for
> the LDOs 1 to 4. When the BUCK10 is used for this, it can be set to a
> LDON_HEAD mode. In this mode, the BUCK10 voltage can't be controlled by
> software, but the voltage is adjusted by PMIC to match the LDO1 .. LDO4
> voltages with a given offset. Offset can be 50mV .. 300mV and is
> changeable at 50mV steps.
> 
> Add 'ldon-head-microvolt' property to denote a board which is designed
> to utilize the LDON_HEAD mode.
> 
> All other properties are already existing.
> 
> Add dt-binding doc for ROHM BD72720 regulators to make it usable.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount@...il.com>
> Reviewed-by: Rob Herring (Arm) <robh@...nel.org>
> 
> ---
> Revision history:
>  v4 =>
>  - No changes
> 
>  v3 => v4:
>  - Drop type from ldon-head
>  - Fix the name patterns for regulator nodes and names
> 
>  v2 => v3:
>  - drop unnecessary descriptions
>  - use microvolts for the 'ldon-head' dt-property
> 
>  RFCv1 => v2:
>  - No changes
> ---
>  .../regulator/rohm,bd72720-regulator.yaml     | 148 ++++++++++++++++++
>  1 file changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd72720-regulator.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/regulator/rohm,bd72720-regulator.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
Documentation/devicetree/bindings/regulator/rohm,bd72720-regulator.yaml: Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/28726d1e0573a6efb6e70716a23ba27c4fc93c6d.1763625920.git.mazziesaccount@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.