linux-kernel - [PATCH v2 2/5] ARM: dts: qcom: msm8960: expressatt: Add Light/Proximity Sensor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251121-expressatt_nfc_accel_magn_light-v2-2-54ce493cc6cf@gmail.com>
Date: Fri, 21 Nov 2025 03:44:45 -0800
From: Rudraksha Gupta via B4 Relay <devnull+guptarud.gmail.com@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Rudraksha Gupta <guptarud@...il.com>
Subject: [PATCH v2 2/5] ARM: dts: qcom: msm8960: expressatt: Add
 Light/Proximity Sensor

From: Rudraksha Gupta <guptarud@...il.com>

Currently the Proximity Sensor doesn't work, but light sensor does.
Left the proximity sensor as a TODO for later.

Signed-off-by: Rudraksha Gupta <guptarud@...il.com>
---
 .../dts/qcom/qcom-msm8960-samsung-expressatt.dts   | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 5ee919dce75b..b68da548a985 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -54,6 +54,32 @@ key-volume-down {
 	};
 };
 
+&gsbi2 {
+	qcom,mode = <GSBI_PROT_I2C>;
+
+	status = "okay";
+};
+
+&gsbi2_i2c {
+	status = "okay";
+
+	light-sensor@39 {
+		compatible = "amstaos,tmd2772";
+		reg = <0x39>;
+		interrupt-parent = <&pm8921_gpio>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8921_l9>;
+		vddio-supply = <&pm8921_lvs4>;
+
+		/* TODO: Proximity doesn't work */
+		amstaos,proximity-diodes = <0>;
+		led-max-microamp = <100000>;
+
+		pinctrl-0 = <&prox_sensor_int>;
+		pinctrl-names = "default";
+	};
+};
+
 &gsbi5 {
 	qcom,mode = <GSBI_PROT_I2C_UART>;
 	status = "okay";
@@ -163,6 +189,15 @@ &pm8921 {
 	interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 };
 
+&pm8921_gpio {
+	prox_sensor_int: prox-sensor-int-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-disable;
+	};
+};
+
 &rpm {
 	regulators {
 		compatible = "qcom,rpm-pm8921-regulators";

-- 
2.51.2