linux-kernel - [PATCH v1 06/12] soc: qcom: geni-se: Introduce helper APIs for performance control

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251122050018.283669-7-praveen.talari@oss.qualcomm.com>
Date: Sat, 22 Nov 2025 10:30:12 +0530
From: Praveen Talari <praveen.talari@....qualcomm.com>
To: Andi Shyti <andi.shyti@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Mukesh Kumar Savaliya <mukesh.savaliya@....qualcomm.com>,
        Viken Dadhaniya <viken.dadhaniya@....qualcomm.com>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>,
        Praveen Talari <praveen.talari@....qualcomm.com>,
        linux-arm-msm@...r.kernel.org, linux-i2c@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: psodagud@...cinc.com, djaggi@...cinc.com, quic_msavaliy@...cinc.com,
        quic_vtanuku@...cinc.com, quic_arandive@...cinc.com,
        quic_shazhuss@...cinc.com
Subject: [PATCH v1 06/12] soc: qcom: geni-se: Introduce helper APIs for performance control

The GENI Serial Engine (SE) drivers (I2C, SPI, and SERIAL) currently
manage performance levels and operating points directly. This resulting
in code duplication across drivers. such as configuring a specific level
or find and apply an OPP based on a clock frequency.

Introduce two new helper APIs, geni_se_set_perf_level() and
geni_se_set_perf_opp(), addresses this issue by providing a streamlined
method for the GENI Serial Engine (SE) drivers to find and set the OPP
based on the desired performance level, thereby eliminating redundancy.

Signed-off-by: Praveen Talari <praveen.talari@....qualcomm.com>
---
 drivers/soc/qcom/qcom-geni-se.c  | 50 ++++++++++++++++++++++++++++++++
 include/linux/soc/qcom/geni-se.h |  4 +++
 2 files changed, 54 insertions(+)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 30b58f2f2e5d..292afa18b86c 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -282,6 +282,12 @@ struct se_fw_hdr {
 #define geni_setbits32(_addr, _v) writel(readl(_addr) |  (_v), _addr)
 #define geni_clrbits32(_addr, _v) writel(readl(_addr) & ~(_v), _addr)
 
+enum domain_idx {
+	DOMAIN_IDX_POWER,
+	DOMAIN_IDX_PERF,
+	DOMAIN_IDX_MAX
+};
+
 /**
  * geni_se_get_qup_hw_version() - Read the QUP wrapper Hardware version
  * @se:	Pointer to the corresponding serial engine.
@@ -1075,6 +1081,50 @@ int geni_se_resources_state(struct geni_se *se, bool power_on)
 }
 EXPORT_SYMBOL_GPL(geni_se_resources_state);
 
+/**
+ * geni_se_set_perf_level() - Set performance level for GENI SE.
+ * @se: Pointer to the struct geni_se instance.
+ * @level: The desired performance level.
+ *
+ * Sets the performance level by directly calling dev_pm_opp_set_level
+ * on the performance device associated with the SE.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+int geni_se_set_perf_level(struct geni_se *se, unsigned long level)
+{
+	return dev_pm_opp_set_level(se->pd_list->pd_devs[DOMAIN_IDX_PERF], level);
+}
+EXPORT_SYMBOL_GPL(geni_se_set_perf_level);
+
+/**
+ * geni_se_set_perf_opp() - Set performance OPP for GENI SE by frequency.
+ * @se: Pointer to the struct geni_se instance.
+ * @clk_freq: The requested clock frequency.
+ *
+ * Finds the nearest operating performance point (OPP) for the given
+ * clock frequency and applies it to the SE's performance device.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+int geni_se_set_perf_opp(struct geni_se *se, unsigned long clk_freq)
+{
+	struct device *perf_dev = se->pd_list->pd_devs[DOMAIN_IDX_PERF];
+	struct dev_pm_opp *opp;
+	int ret;
+
+	opp = dev_pm_opp_find_freq_floor(perf_dev, &clk_freq);
+	if (IS_ERR(opp)) {
+		dev_err(se->dev, "failed to find opp for freq %lu\n", clk_freq);
+		return PTR_ERR(opp);
+	}
+
+	ret = dev_pm_opp_set_opp(perf_dev, opp);
+	dev_pm_opp_put(opp);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(geni_se_set_perf_opp);
+
 /**
  * geni_se_domain_attach() - Attach power domains to a GENI SE device.
  * @se: Pointer to the geni_se structure representing the GENI SE device.
diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h
index 8c9b847aaf20..cac999d6ca31 100644
--- a/include/linux/soc/qcom/geni-se.h
+++ b/include/linux/soc/qcom/geni-se.h
@@ -548,5 +548,9 @@ int geni_se_resources_state(struct geni_se *se, bool power_on);
 int geni_load_se_firmware(struct geni_se *se, enum geni_se_protocol_type protocol);
 
 int geni_se_domain_attach(struct geni_se *se);
+
+int geni_se_set_perf_level(struct geni_se *se, unsigned long level);
+
+int geni_se_set_perf_opp(struct geni_se *se, unsigned long clk_freq);
 #endif
 #endif
-- 
2.34.1