[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251123225059.49665-1-e@freeshell.de>
Date: Sun, 23 Nov 2025 14:50:43 -0800
From: E Shattow <e@...eshell.de>
To: Paul Walmsley <pjw@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Alexandre Ghiti <alex@...ti.fr>
Cc: linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org,
devicetree@...r.kernel.org,
E Shattow <e@...eshell.de>,
Icenowy Zheng <uwu@...nowy.me>,
Rob Herring <robh@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Subject: [PATCH v3 0/2] riscv: dts: starfive: Add OrangePi RV board
Icenowy is busy and so with their permission I have applied v2 review
feedback. Additionally I revise the commit messages. This should now be in
good shape for -next
- E
Changes since v2:
- enable active high mmc1 card detect gpio
- drop delete-node from mmc0 reset pins following commit fa939a287224
("dts: starfive: jh7110-common: split out mmc0 reset pins from common
into boards")
- sort phy0 properties rx before tx
- revise commit description of SoC peripherals as list
- revise commit description of compatible binding
Changes in v2:
- Property order change mentioned in the review of v1.
- Added Wi-Fi (along with the always on VCC3V3_PCIE regulator, which is
used to power up WIFI_3V3). The OOB IRQ is still not possible to use
because of some incompatibility between StarFive pinctrl driver and
brcmfmac.
- Removed the LED because it's in common DTSI.
Icenowy Zheng (2):
dt-bindings: riscv: starfive: add xunlong,orangepi-rv
riscv: dts: starfive: add Orange Pi RV
.../devicetree/bindings/riscv/starfive.yaml | 1 +
arch/riscv/boot/dts/starfive/Makefile | 1 +
.../boot/dts/starfive/jh7110-orangepi-rv.dts | 76 +++++++++++++++++++
3 files changed, 78 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-orangepi-rv.dts
base-commit: 1088d49b626487777913079bef0db3adef4bfb4a
--
2.50.0
Powered by blists - more mailing lists