Message-ID: <2f77c928-b16e-1666-5e65-8f62a84c93fc@linux.intel.com>
Date: Mon, 24 Nov 2025 18:58:50 +0200 (EET)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Rong Zhang <i@...g.moe>
cc: Mark Pearson <mpearson-lenovo@...ebb.ca>, 
    "Derek J. Clark" <derekjohn.clark@...il.com>, Armin Wolf <W_Armin@....de>, 
    Hans de Goede <hansg@...nel.org>, Guenter Roeck <linux@...ck-us.net>, 
    platform-driver-x86@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>, 
    linux-hwmon@...r.kernel.org
Subject: Re: [PATCH v6 7/7] platform/x86: lenovo-wmi-other: Add HWMON for
 fan reporting/tuning

On Sun, 23 Nov 2025, Rong Zhang wrote:

> Register an HWMON device for fan reporting/tuning according to
> Capability Data 00 (capdata00) and Fan Test Data (capdata_fan) provided
> by lenovo-wmi-capdata. The corresponding HWMON nodes are:
> 
>  - fanX_enable: enable/disable the fan (tunable)
>  - fanX_input: current RPM
>  - fanX_max: maximum RPM
>  - fanX_min: minimum RPM
>  - fanX_target: target RPM (tunable)
> 
> Information from capdata00 and capdata_fan are used to control the
> visibility and constraints of HWMON attributes. Fan info from capdata00
> is collected on bind, while fan info from capdata_fan is collected in a
> callback. Once all fan info is collected, register the HWMON device.
> 
> Signed-off-by: Rong Zhang <i@...g.moe>
> ---
> Changes in v4:
> - Rework HWMON registration due to the introduction of [PATCH v4 6/7]
>   - Collect fan info from capdata00 and capdata_fan separately
>   - Use a callback to collect fan info from capdata_fan
>   - Trigger HWMON registration only if all fan info is collected
>   - Do not check 0x04050000.supported, implied by the presense of
>     capdata_fan
> - Drop Reviewed-by & Tested-by due to the changes, please review & test
> 
> Changes in v3:
> - Reword documentation (thanks Derek J. Clark)
> 
> Changes in v2:
> - Define 4 fan channels instead of 2 (thanks Derek J. Clark)
> - Squash min/max reporting patch into this one (ditto)
> - Query 0x04050000 for interface availability (ditto)
>   - New parameter "expose_all_fans" to skip this check
> - Enforce min/max RPM constraint on set (ditto)
>   - New parameter "relax_fan_constraint" to disable this behavior
>   - Drop parameter "ignore_fan_cap", superseded by the next one
>   - New parameter "expose_all_fans" to expose fans w/o such data
> - Assume auto mode on probe (ditto)
> - Reword documentation (ditto)
> - Do not register HWMON device if no fan can be exposed
> - fanX_target: Return -EBUSY instead of raw target value when fan stops
> ---
>  .../wmi/devices/lenovo-wmi-other.rst          |  11 +
>  drivers/platform/x86/lenovo/Kconfig           |   1 +
>  drivers/platform/x86/lenovo/wmi-other.c       | 485 +++++++++++++++++-
>  3 files changed, 487 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/wmi/devices/lenovo-wmi-other.rst b/Documentation/wmi/devices/lenovo-wmi-other.rst
> index 821282e07d93..bd1d733ff286 100644
> --- a/Documentation/wmi/devices/lenovo-wmi-other.rst
> +++ b/Documentation/wmi/devices/lenovo-wmi-other.rst
> @@ -31,6 +31,8 @@ under the following path:
>  
>    /sys/class/firmware-attributes/lenovo-wmi-other/attributes/<attribute>/
>  
> +Additionally, this driver also exports attributes to HWMON.
> +
>  LENOVO_CAPABILITY_DATA_00
>  -------------------------
>  
> @@ -39,6 +41,11 @@ WMI GUID ``362A3AFE-3D96-4665-8530-96DAD5BB300E``
>  The LENOVO_CAPABILITY_DATA_00 interface provides various information that
>  does not rely on the gamezone thermal mode.
>  
> +The following HWMON attributes are implemented:
> + - fanX_enable: enable/disable the fan (tunable)
> + - fanX_input: current RPM
> + - fanX_target: target RPM (tunable)
> +
>  LENOVO_CAPABILITY_DATA_01
>  -------------------------
>  
> @@ -70,6 +77,10 @@ WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21``
>  The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of
>  cooling fans.
>  
> +The following HWMON attributes are implemented:
> + - fanX_max: maximum RPM
> + - fanX_min: minimum RPM
> +
>  WMI interface description
>  =========================
>  
> diff --git a/drivers/platform/x86/lenovo/Kconfig b/drivers/platform/x86/lenovo/Kconfig
> index fb96a0f908f0..be9af0451146 100644
> --- a/drivers/platform/x86/lenovo/Kconfig
> +++ b/drivers/platform/x86/lenovo/Kconfig
> @@ -263,6 +263,7 @@ config LENOVO_WMI_GAMEZONE
>  config LENOVO_WMI_TUNING
>  	tristate "Lenovo Other Mode WMI Driver"
>  	depends on ACPI_WMI
> +	select HWMON
>  	select FW_ATTR_CLASS
>  	select LENOVO_WMI_DATA
>  	select LENOVO_WMI_EVENTS
> diff --git a/drivers/platform/x86/lenovo/wmi-other.c b/drivers/platform/x86/lenovo/wmi-other.c
> index b3adcc2804fa..ce1ca13db4b5 100644
> --- a/drivers/platform/x86/lenovo/wmi-other.c
> +++ b/drivers/platform/x86/lenovo/wmi-other.c
> @@ -14,7 +14,16 @@
>   * These attributes typically don't fit anywhere else in the sysfs and are set
>   * in Windows using one of Lenovo's multiple user applications.
>   *
> + * Additionally, this driver also exports tunable fan speed RPM to HWMON.
> + * Min/max RPM are also provided for reference.
> + *
>   * Copyright (C) 2025 Derek J. Clark <derekjohn.clark@...il.com>
> + *   - fw_attributes
> + *   - binding to Capability Data 01
> + *
> + * Copyright (C) 2025 Rong Zhang <i@...g.moe>
> + *   - HWMON
> + *   - binding to Capability Data 00 and Fan
>   */
>  
>  #include <linux/acpi.h>
> @@ -25,6 +34,7 @@
>  #include <linux/device.h>
>  #include <linux/export.h>
>  #include <linux/gfp_types.h>
> +#include <linux/hwmon.h>
>  #include <linux/idr.h>
>  #include <linux/kdev_t.h>
>  #include <linux/kobject.h>
> @@ -49,12 +59,26 @@
>  #define LWMI_FEATURE_ID_CPU_SPL 0x02
>  #define LWMI_FEATURE_ID_CPU_FPPT 0x03
>  
> +#define LWMI_FEATURE_ID_FAN_RPM 0x03
> +
>  #define LWMI_TYPE_ID_NONE 0x00
>  
>  #define LWMI_FEATURE_VALUE_GET 17
>  #define LWMI_FEATURE_VALUE_SET 18
>  
> +#define LWMI_FAN_ID_BASE 1
> +#define LWMI_FAN_NR 4
> +#define LWMI_FAN_ID(x) ((x) + LWMI_FAN_ID_BASE)
> +
> +#define LWMI_ATTR_ID_FAN_RPM(x)						\
> +	(FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) |	\
> +	 FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_RPM) |	\
> +	 FIELD_PREP(LWMI_ATTR_TYPE_ID_MASK, LWMI_FAN_ID(x)))
> +
> +#define LWMI_FAN_STOP_RPM 1
> +
>  #define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other"
> +#define LWMI_OM_HWMON_NAME "lenovo_wmi_other"
>  
>  static BLOCKING_NOTIFIER_HEAD(om_chain_head);
>  static DEFINE_IDA(lwmi_om_ida);
> @@ -71,15 +95,439 @@ struct lwmi_om_priv {
>  	struct component_master_ops *ops;
>  
>  	/* only valid after capdata bind */
> +	struct cd_list *cd00_list;
>  	struct cd_list *cd01_list;
>  
> +	struct device *hwmon_dev;
>  	struct device *fw_attr_dev;
>  	struct kset *fw_attr_kset;
>  	struct notifier_block nb;
>  	struct wmi_device *wdev;
>  	int ida_id;
> +
> +	struct fan_info {
> +		u32 supported;
> +		u32 last_target;
> +		long min_rpm;
> +		long max_rpm;
> +	} fan_info[LWMI_FAN_NR];

I personally don't like this style at all because it makes finding the 
type of the variable harder with grep.

Add an empty line.

> +	struct {
> +		bool capdata00_collected : 1;
> +		bool capdata_fan_collected : 1;
> +	} fan_flags;
> +};
> +
> +/*
> + * Visibility of fan channels:
> + *
> + * +-------------------+---------+------------------+-----------------------+------------+
> + * |                   | default | +expose_all_fans | +relax_fan_constraint | +both      |
> + * +-------------------+---------+------------------+-----------------------+------------+
> + * | canonical         | RW      | RW               | RW+relaxed            | RW+relaxed |
> + * +-------------------+---------+------------------+-----------------------+------------+
> + * | -capdata_fan[idx] | N       | RO               | N                     | RW+relaxed |
> + * +-------------------+---------+------------------+-----------------------+------------+
> + *
> + * Note:
> + * 1. LWMI_ATTR_ID_FAN_RPM[idx].supported is always checked before exposing a channel.
> + * 2. -capdata_fan implies -capdata_fan[idx].
> + */
> +static bool expose_all_fans;
> +module_param(expose_all_fans, bool, 0444);
> +MODULE_PARM_DESC(expose_all_fans,
> +	"This option skips some capability checks and solely relies on per-channel ones "
> +	"to expose fan attributes. Use with caution.");
> +
> +static bool relax_fan_constraint;
> +module_param(relax_fan_constraint, bool, 0444);
> +MODULE_PARM_DESC(relax_fan_constraint,
> +	"Do not enforce fan RPM constraint (min/max RPM) "
> +	"and enables fan tuning when such data is missing. "
> +	"Enabling this may results in HWMON attributes being out-of-sync. Use with caution.");
> +
> +/* ======== HWMON (component: lenovo-wmi-capdata 00 & fan) ======== */
> +
> +/**
> + * lwmi_om_fan_get_set() - Get or set fan RPM value of specified fan
> + * @priv: Driver private data structure
> + * @channel: Fan channel index (0-based)
> + * @val: Pointer to value (input for set, output for get)
> + * @set: True to set value, false to get value
> + *
> + * Communicates with WMI interface to either retrieve current fan RPM
> + * or set target fan RPM.
> + *
> + * Return: 0 on success, or an error code.
> + */
> +static int lwmi_om_fan_get_set(struct lwmi_om_priv *priv, int channel, u32 *val, bool set)
> +{
> +	struct wmi_method_args_32 args;
> +	u32 method_id, retval;
> +	int err;
> +
> +	method_id = set ? LWMI_FEATURE_VALUE_SET : LWMI_FEATURE_VALUE_GET;
> +	args.arg0 = LWMI_ATTR_ID_FAN_RPM(channel);
> +	args.arg1 = set ? *val : 0;
> +
> +	err = lwmi_dev_evaluate_int(priv->wdev, 0x0, method_id,
> +				    (unsigned char *)&args, sizeof(args), &retval);
> +	if (err)
> +		return err;
> +
> +	if (!set)
> +		*val = retval;
> +	else if (retval != 1)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +/**
> + * lwmi_om_hwmon_is_visible() - Determine visibility of HWMON attributes
> + * @drvdata: Driver private data
> + * @type: Sensor type
> + * @attr: Attribute identifier
> + * @channel: Channel index
> + *
> + * Determines whether an HWMON attribute should be visible in sysfs
> + * based on hardware capabilities and current configuration.
> + *
> + * Return: permission mode, or 0 if invisible.
> + */
> +static umode_t lwmi_om_hwmon_is_visible(const void *drvdata, enum hwmon_sensor_types type,
> +					u32 attr, int channel)
> +{
> +	struct lwmi_om_priv *priv = (struct lwmi_om_priv *)drvdata;
> +	bool visible = false;
> +
> +	if (type == hwmon_fan) {
> +		if (!(priv->fan_info[channel].supported & LWMI_SUPP_VALID))
> +			return 0;
> +
> +		switch (attr) {
> +		case hwmon_fan_enable:
> +		case hwmon_fan_target:
> +			if (!(priv->fan_info[channel].supported & LWMI_SUPP_MAY_SET))
> +				return 0;
> +
> +			if (relax_fan_constraint ||
> +			    (priv->fan_info[channel].min_rpm >= 0 &&
> +			     priv->fan_info[channel].max_rpm >= 0))
> +				return 0644;
> +
> +			/*
> +			 * Reaching here implies expose_all_fans is set.
> +			 * See lwmi_om_hwmon_add().
> +			 */
> +			dev_warn_once(&priv->wdev->dev,
> +				      "fan tuning disabled due to missing RPM constraint\n");
> +			return 0;
> +		case hwmon_fan_input:
> +			visible = priv->fan_info[channel].supported & LWMI_SUPP_MAY_GET;
> +			break;
> +		case hwmon_fan_min:
> +			visible = priv->fan_info[channel].min_rpm >= 0;
> +			break;
> +		case hwmon_fan_max:
> +			visible = priv->fan_info[channel].max_rpm >= 0;
> +			break;
> +		}
> +	}
> +
> +	return visible ? 0444 : 0;
> +}
> +
> +/**
> + * lwmi_om_hwmon_read() - Read HWMON sensor data
> + * @dev: Device pointer
> + * @type: Sensor type
> + * @attr: Attribute identifier
> + * @channel: Channel index
> + * @val: Pointer to store value
> + *
> + * Reads current sensor values from hardware through WMI interface.
> + *
> + * Return: 0 on success, or an error code.
> + */
> +static int lwmi_om_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> +			      u32 attr, int channel, long *val)
> +{
> +	struct lwmi_om_priv *priv = dev_get_drvdata(dev);
> +	u32 retval = 0;
> +	int err;
> +
> +	if (type == hwmon_fan) {
> +		switch (attr) {
> +		case hwmon_fan_input:
> +			err = lwmi_om_fan_get_set(priv, channel, &retval, false);
> +			if (err)
> +				return err;
> +
> +			*val = retval;
> +			return 0;
> +		case hwmon_fan_enable:
> +			*val = priv->fan_info[channel].last_target != LWMI_FAN_STOP_RPM;
> +			return 0;
> +		case hwmon_fan_target:
> +			if (priv->fan_info[channel].last_target == LWMI_FAN_STOP_RPM)
> +				return -EBUSY;
> +
> +			*val = priv->fan_info[channel].last_target;
> +			return 0;
> +		case hwmon_fan_min:
> +			*val = priv->fan_info[channel].min_rpm;
> +			return 0;
> +		case hwmon_fan_max:
> +			*val = priv->fan_info[channel].max_rpm;
> +			return 0;
> +		}
> +	}
> +
> +	return -EOPNOTSUPP;
> +}
> +
> +/**
> + * lwmi_om_hwmon_write() - Write HWMON sensor data
> + * @dev: Device pointer
> + * @type: Sensor type
> + * @attr: Attribute identifier
> + * @channel: Channel index
> + * @val: Value to write
> + *
> + * Writes configuration values to hardware through WMI interface.
> + *
> + * Return: 0 on success, or an error code.
> + */
> +static int lwmi_om_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
> +			       u32 attr, int channel, long val)
> +{
> +	struct lwmi_om_priv *priv = dev_get_drvdata(dev);
> +	u32 raw, min_rpm, max_rpm;
> +	int err;
> +
> +	if (type == hwmon_fan) {
> +		switch (attr) {
> +		case hwmon_fan_enable:
> +			if (val == 0)
> +				raw = LWMI_FAN_STOP_RPM;
> +			else if (val == 1)
> +				raw = 0; /* auto */
> +			else
> +				return -EINVAL;
> +
> +			goto fan_set;
> +		case hwmon_fan_target:
> +			if (val == 0) {
> +				raw = 0;
> +				goto fan_set;
> +			}
> +
> +			min_rpm = relax_fan_constraint
> +					? LWMI_FAN_STOP_RPM + 1
> +					: priv->fan_info[channel].min_rpm;
> +			max_rpm = relax_fan_constraint
> +					? U16_MAX
> +					: priv->fan_info[channel].max_rpm;
> +
> +			if (val < min_rpm || val > max_rpm)
> +				return -EDOM;
> +
> +			raw = val;
> +fan_set:
> +			err = lwmi_om_fan_get_set(priv, channel, &raw, true);
> +			if (err)
> +				return err;
> +
> +			priv->fan_info[channel].last_target = raw;
> +			return 0;
> +		}
> +	}
> +
> +	return -EOPNOTSUPP;
> +}
> +
> +static const struct hwmon_channel_info * const lwmi_om_hwmon_info[] = {
> +	/* Must match LWMI_FAN_NR. */
> +	HWMON_CHANNEL_INFO(fan,
> +			   HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET |
> +			   HWMON_F_MIN | HWMON_F_MAX,
> +			   HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET |
> +			   HWMON_F_MIN | HWMON_F_MAX,
> +			   HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET |
> +			   HWMON_F_MIN | HWMON_F_MAX,
> +			   HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET |
> +			   HWMON_F_MIN | HWMON_F_MAX),
> +	NULL
>  };
>  
> +static const struct hwmon_ops lwmi_om_hwmon_ops = {
> +	.is_visible = lwmi_om_hwmon_is_visible,
> +	.read = lwmi_om_hwmon_read,
> +	.write = lwmi_om_hwmon_write,
> +};
> +
> +static const struct hwmon_chip_info lwmi_om_hwmon_chip_info = {
> +	.ops = &lwmi_om_hwmon_ops,
> +	.info = lwmi_om_hwmon_info,
> +};
> +
> +/**
> + * lwmi_om_hwmon_add() - Register HWMON device if all info is collected
> + * @priv: Driver private data
> + */
> +static void lwmi_om_hwmon_add(struct lwmi_om_priv *priv)
> +{
> +	int i, valid;
> +
> +	if (WARN_ON(priv->hwmon_dev))
> +		return;
> +
> +	if (!priv->fan_flags.capdata00_collected || !priv->fan_flags.capdata_fan_collected) {
> +		dev_dbg(&priv->wdev->dev, "HWMON registration pending (00: %d, fan: %d)\n",
> +			priv->fan_flags.capdata00_collected,
> +			priv->fan_flags.capdata_fan_collected);
> +		return;
> +	}
> +
> +	if (expose_all_fans)
> +		dev_warn(&priv->wdev->dev, "all fans exposed. Use with caution\n");
> +
> +	if (relax_fan_constraint)
> +		dev_warn(&priv->wdev->dev, "fan RPM constraint relaxed. Use with caution\n");
> +
> +	valid = 0;
> +	for (i = 0; i < LWMI_FAN_NR; i++) {
> +		if (!(priv->fan_info[i].supported & LWMI_SUPP_VALID))
> +			continue;
> +
> +		valid++;
> +
> +		if (!expose_all_fans &&
> +		    (priv->fan_info[i].min_rpm < 0 || priv->fan_info[i].max_rpm < 0)) {
> +			dev_dbg(&priv->wdev->dev, "missing RPM constraint for fan%d, hiding\n",
> +				LWMI_FAN_ID(i));
> +			priv->fan_info[i].supported = 0;
> +			valid--;
> +		}
> +	}
> +
> +	if (valid == 0) {
> +		dev_warn(&priv->wdev->dev,
> +			 "fan reporting/tuning is unsupported on this device\n");
> +		return;
> +	}
> +
> +	priv->hwmon_dev = hwmon_device_register_with_info(&priv->wdev->dev,
> +							  LWMI_OM_HWMON_NAME, priv,
> +							  &lwmi_om_hwmon_chip_info,
> +							  NULL);
> +	if (IS_ERR(priv->hwmon_dev)) {
> +		dev_warn(&priv->wdev->dev, "failed to register HWMON device: %ld\n",
> +			 PTR_ERR(priv->hwmon_dev));
> +		priv->hwmon_dev = NULL;
> +		return;
> +	}
> +
> +	dev_dbg(&priv->wdev->dev, "registered HWMON device\n");
> +}
> +
> +/**
> + * lwmi_om_hwmon_remove() - Unregister HWMON device
> + * @priv: Driver private data
> + *
> + * Unregisters the HWMON device if applicable.
> + */
> +static void lwmi_om_hwmon_remove(struct lwmi_om_priv *priv)
> +{
> +	if (!priv->hwmon_dev)
> +		return;
> +
> +	hwmon_device_unregister(priv->hwmon_dev);
> +	priv->hwmon_dev = NULL;
> +}
> +
> +/**
> + * lwmi_om_fan_info_init() - Initialzie fan info
> + * @priv: Driver private data
> + *
> + * lwmi_om_fan_info_collect_cd00() and lwmi_om_fan_info_collect_cd_fan() may be
> + * called in an arbitrary order. Hence, initializion must be done before.
> + */
> +static void lwmi_om_fan_info_init(struct lwmi_om_priv *priv)
> +{
> +	int i;
> +
> +	for (i = 0; i < LWMI_FAN_NR; i++) {
> +		priv->fan_info[i] = (struct fan_info) {
> +			.supported = 0,
> +			/*
> +			 * Assume 0 on probe as the EC resets all fans to auto mode on (re)boot.
> +			 *
> +			 * Note that S0ix (s2idle) preserves the RPM target, so we don't need
> +			 * suspend/resume callbacks. This behavior has not been tested on S3-
> +			 * capable devices, but I doubt if such devices even have this interface.
> +			 */
> +			.last_target = 0,
> +			.min_rpm = -ENODATA,
> +			.max_rpm = -ENODATA,
> +		};
> +	}
> +
> +	priv->fan_flags.capdata00_collected = false;
> +	priv->fan_flags.capdata_fan_collected = false;
> +}
> +
> +/**
> + * lwmi_om_fan_info_collect_cd00() - Collect fan info from capdata 00
> + * @priv: Driver private data
> + */
> +static void lwmi_om_fan_info_collect_cd00(struct lwmi_om_priv *priv)
> +{
> +	struct capdata00 capdata00;
> +	int i, err;
> +
> +	dev_dbg(&priv->wdev->dev, "Collecting fan info from capdata00\n");
> +
> +	for (i = 0; i < LWMI_FAN_NR; i++) {
> +		err = lwmi_cd00_get_data(priv->cd00_list, LWMI_ATTR_ID_FAN_RPM(i), &capdata00);
> +		priv->fan_info[i].supported = err ? 0 : capdata00.supported;
> +	}
> +
> +	priv->fan_flags.capdata00_collected = true;
> +	lwmi_om_hwmon_add(priv);
> +}
> +
> +/**
> + * lwmi_om_fan_info_collect_cd_fan() - Collect fan info from capdata fan
> + * @dev: Pointer to the lenovo-wmi-other device
> + * @cd_fan_list: Pointer to the capdata fan list
> + */
> +static void lwmi_om_fan_info_collect_cd_fan(struct device *dev, struct cd_list *cd_fan_list)
> +{
> +	struct lwmi_om_priv *priv = dev_get_drvdata(dev);
> +	struct capdata_fan capdata_fan;
> +	int i, err;
> +
> +	dev_dbg(dev, "Collecting fan info from capdata_fan\n");
> +	if (!cd_fan_list)
> +		goto out;
> +
> +	for (i = 0; i < LWMI_FAN_NR; i++) {
> +		err = lwmi_cd_fan_get_data(cd_fan_list, LWMI_FAN_ID(i), &capdata_fan);
> +		if (err)
> +			continue;
> +
> +		priv->fan_info[i].min_rpm = capdata_fan.min_rpm;
> +		priv->fan_info[i].max_rpm = capdata_fan.max_rpm;
> +	}

Add an empty line.

> +out:
> +	priv->fan_flags.capdata_fan_collected = true;
> +	lwmi_om_hwmon_add(priv);
> +}
> +
> +/* ======== fw_attributes (component: lenovo-wmi-capdata 01) ======== */
> +
>  struct tunable_attr_01 {
>  	struct capdata01 *capdata;
>  	struct device *dev;
> @@ -559,32 +1007,45 @@ static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv)
>  	device_unregister(priv->fw_attr_dev);
>  }
>  
> +/* ======== Self (master: lenovo-wmi-other) ======== */
> +
>  /**
>   * lwmi_om_master_bind() - Bind all components of the other mode driver
>   * @dev: The lenovo-wmi-other driver basic device.
>   *
> - * Call component_bind_all to bind the lenovo-wmi-capdata01 driver to the
> - * lenovo-wmi-other master driver. On success, assign the capability data 01
> - * list pointer to the driver data struct for later access. This pointer
> - * is only valid while the capdata01 interface exists. Finally, register all
> - * firmware attribute groups.
> + * Call component_bind_all to bind the lenovo-wmi-capdata devices to the
> + * lenovo-wmi-other master driver, with a callback to collect fan info from
> + * capdata_fan. On success, assign the capability data list pointers to the
> + * driver data struct for later access. These pointers are only valid while the
> + * capdata interfaces exist. Finally, collect fan info from capdata00 and
> + * register all firmware attribute groups. Note that the HWMON device is
> + * registered only if all fan info is collected. Hence, it is not registered
> + * here. See lwmi_om_fan_info_collect_cd00() and
> + * lwmi_om_fan_info_collect_cd_fan().
>   *
>   * Return: 0 on success, or an error code.
>   */
>  static int lwmi_om_master_bind(struct device *dev)
>  {
>  	struct lwmi_om_priv *priv = dev_get_drvdata(dev);
> -	struct lwmi_cd_binder binder = { 0 };
> +	struct lwmi_cd_binder binder = {
> +		.cd_fan_list_cb = lwmi_om_fan_info_collect_cd_fan,
> +	};
>  	int ret;
>  
> +	lwmi_om_fan_info_init(priv);
> +
>  	ret = component_bind_all(dev, &binder);
>  	if (ret)
>  		return ret;
>  
> +	priv->cd00_list = binder.cd00_list;
>  	priv->cd01_list = binder.cd01_list;
> -	if (!priv->cd01_list)
> +	if (!priv->cd00_list || !priv->cd01_list)
>  		return -ENODEV;
>  
> +	lwmi_om_fan_info_collect_cd00(priv);
> +
>  	return lwmi_om_fw_attr_add(priv);
>  }
>  
> @@ -592,15 +1053,18 @@ static int lwmi_om_master_bind(struct device *dev)
>   * lwmi_om_master_unbind() - Unbind all components of the other mode driver
>   * @dev: The lenovo-wmi-other driver basic device
>   *
> - * Unregister all capability data attribute groups. Then call
> - * component_unbind_all to unbind the lenovo-wmi-capdata01 driver from the
> - * lenovo-wmi-other master driver. Finally, free the IDA for this device.
> + * Unregister all firmware attribute groups and the HWMON device. Then call
> + * component_unbind_all to unbind lenovo-wmi-capdata devices from the
> + * lenovo-wmi-other master driver.
>   */
>  static void lwmi_om_master_unbind(struct device *dev)
>  {
>  	struct lwmi_om_priv *priv = dev_get_drvdata(dev);
>  
>  	lwmi_om_fw_attr_remove(priv);
> +
> +	lwmi_om_hwmon_remove(priv);
> +
>  	component_unbind_all(dev, NULL);
>  }
>  
> @@ -665,5 +1129,6 @@ MODULE_IMPORT_NS("LENOVO_WMI_CD");
>  MODULE_IMPORT_NS("LENOVO_WMI_HELPERS");
>  MODULE_DEVICE_TABLE(wmi, lwmi_other_id_table);
>  MODULE_AUTHOR("Derek J. Clark <derekjohn.clark@...il.com>");
> +MODULE_AUTHOR("Rong Zhang <i@...g.moe>");
>  MODULE_DESCRIPTION("Lenovo Other Mode WMI Driver");
>  MODULE_LICENSE("GPL");
> 

-- 
 i.

Powered by blists - more mailing lists