| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251124-staging-ad4062-v2-1-a375609afbb7@analog.com>
Date: Mon, 24 Nov 2025 10:18:00 +0100
From: Jorge Marques <jorge.marques@...log.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich
<Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>,
"David
Lechner" <dlechner@...libre.com>,
Nuno Sá
<nuno.sa@...log.com>,
Andy Shevchenko <andy@...nel.org>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>, Jonathan Corbet <corbet@....net>,
Linus Walleij
<linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>
CC: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-gpio@...r.kernel.org>, Jorge Marques <jorge.marques@...log.com>
Subject: [PATCH v2 1/9] dt-bindings: iio: adc: Add adi,ad4062
Add dt-bindings for AD4062 family, devices AD4060/AD4062, low-power with
monitor capabilities SAR ADCs. Each variant of the family differs in
resolution. The device contains two outputs (gp0, gp1). The outputs can
be configured for range of options, such as threshold and data ready.
The device uses a 2-wire I3C interface.
Signed-off-by: Jorge Marques <jorge.marques@...log.com>
---
.../devicetree/bindings/iio/adc/adi,ad4062.yaml | 123 +++++++++++++++++++++
MAINTAINERS | 6 +
2 files changed, 129 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
new file mode 100644
index 0000000000000..a25af66dd64d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4062.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4062 ADC family device driver
+
+maintainers:
+ - Jorge Marques <jorge.marques@...log.com>
+
+description: |
+ Analog Devices AD4062 Single Channel Precision SAR ADC family
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4060.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4062.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad4060
+ - adi,ad4062
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ The interrupt pins are digital outputs that can be configured at runtime
+ as multiple interrupt signals. Each can be configured as GP_INTR, RDY,
+ DEV_EN, logic low, logic high and DEV_RDY (GP1 only). RDY is the
+ active-low data ready signal, indicates when new ADC data are ready to
+ read. DEV_EN synchronizes the enable and power-down states of signal
+ chain devices with the ADC sampling instant. DEV_RDY is an active-high
+ signal that indicates when the device is ready to accept serial interface
+ communications. In GP_INTR mode, the interrupt outputs one of the
+ threshold detection interrupt signals (MIN_INTR, MAX_INTR or either).
+ minItems: 1
+ items:
+ - description:
+ gp0, interrupt line for GP0 pin, cannot be configured as DEV_RDY.
+ - description:
+ gp1, interrupt line for GP1 pin, can be configured to any setting.
+
+ interrupt-names:
+ items:
+ - const: gp0
+ - const: gp1
+
+ gpio-controller:
+ description:
+ Marks the device node as a GPIO controller. GPs not listed in
+ interrupt-names are exposed as a GPO.
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell is the GPIO number and the second cell specifies
+ GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+ vdd-supply:
+ description: Analog power supply.
+
+ vio-supply:
+ description: Digital interface logic power supply.
+
+ ref-supply:
+ description:
+ Reference voltage to set the ADC full-scale range. If not present,
+ vdd-supply is used as the reference voltage.
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vio-supply
+
+allOf:
+ - $ref: /schemas/i3c/i3c.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i3c {
+ #address-cells = <3>;
+ #size-cells = <0>;
+
+ adc@0,2ee007c0000 {
+ reg = <0x0 0x2ee 0x7c0000>;
+ vdd-supply = <&vdd>;
+ vio-supply = <&vio>;
+ ref-supply = <&ref>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <0 0 IRQ_TYPE_EDGE_RISING>,
+ <0 1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "gp0", "gp1";
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i3c {
+ #address-cells = <3>;
+ #size-cells = <0>;
+
+ adc@0,2ee007c0000 {
+ reg = <0x0 0x2ee 0x7c0000>;
+ vdd-supply = <&vdd>;
+ vio-supply = <&vio>;
+ ref-supply = <&ref>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 31d98efb1ad15..e22ba5ec8c849 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1432,6 +1432,12 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
F: Documentation/iio/ad4030.rst
F: drivers/iio/adc/ad4030.c
+ANALOG DEVICES INC AD4062 DRIVER
+M: Jorge Marques <jorge.marques@...log.com>
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
+
ANALOG DEVICES INC AD4080 DRIVER
M: Antoniu Miclaus <antoniu.miclaus@...log.com>
L: linux-iio@...r.kernel.org
--
2.51.1
Powered by blists - more mailing lists