[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251126-rubikpi-next-20251125-v7-0-e46095b80529@thundersoft.com>
Date: Wed, 26 Nov 2025 00:07:01 +0800
From: Hongyang Zhao <hongyang.zhao@...ndersoft.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Hongyang Zhao <hongyang.zhao@...ndersoft.com>,
Roger Shimizu <rosh@...ian.org>, Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH v7 0/2] arm64: dts: qcom: Add qcs6490-rubikpi3 board dts
RUBIK Pi 3 (https://rubikpi.ai/), a lightweight development board based on
Qualcomm Dragonwing™ QCS6490 platform, is the first Pi built on Qualcomm
AI platforms for developers.
This commit enables the following features:
Works:
- Bluetooth (AP6256)
- Wi-Fi (AP6256)
- Ethernet (AX88179B connected to UPD720201)
- Two USB Type-A 3.0 ports (UPD720201 connected to PCIe0)
- USB Type-A 2.0 port
- USB Type-C
- M.2 M-Key 2280 PCIe 3.0
- FAN
- RTC
- 40PIN: I2C x1, UART x1
Signed-off-by: Hongyang Zhao <hongyang.zhao@...ndersoft.com>
---
Changes in v7:
- Revert the changes made to PCIe1 in version V6.
- Change the ADSP firmware path to `qcom/qcs6490/Thundercomm/RubikPi3/adsp.mbn`.
- Link to v6: https://lore.kernel.org/all/20251115-rubikpi-next-20251114-v1-0-fc630dc5bb5d@thundersoft.com/
Changes in v6:
- Fix device tree formatting issues.
- Add firmware-name to QUPv3 nodes.
- An "Internal error: synchronous external abort" error occurred while
executing the `qcom_pcie_clear_hpc` function in the PCIe1 RC. The following
changes were rolled back(overriding the configuration in `kodiak.dtsi`):
03e928442d46 arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature
- Replace the three monochrome LEDs with multicolor LEDs.
- The drive-strength value of the pins is modified uniformly.
- Link to v5: https://lore.kernel.org/linux-arm-msm/20251025122724.633766-1-hongyang.zhao@thundersoft.com/
Changes in v5:
- Fix device tree formatting issues.
- Add fan control that follows CPU0 temperature.
- Link to v4: https://lore.kernel.org/linux-arm-msm/20250930043258.249641-1-hongyang.zhao@thundersoft.com/
Changes in v4:
- Enable PCIe0 node.
- Added AX88179B Ethernet and UPD720201 USBHUB power control.
- Delete the nodes and attributes defined in sc7280.dtsi.
- Modify qcom.yaml to add binding for the Thundercomm RUBIK Pi 3 board.
- Link to v3: https://lore.kernel.org/linux-arm-msm/20250924161120.27051-1-hongyang.zhao@thundersoft.com/
Changes in v3:
- Rebase on linux-next/master.
- Link to v2: https://lore.kernel.org/linux-arm-msm/20250924121541.128582-1-hongyang.zhao@thundersoft.com/
Changes in v2:
- Fix problems found when running device tree check.
- Enable USB2.0 interface.
- Link to v1: https://lore.kernel.org/linux-arm-msm/20250923064330.518784-1-hongyang.zhao@thundersoft.com/
---
---
Hongyang Zhao (2):
dt-bindings: arm: qcom: Add Thundercomm RUBIK Pi 3
arm64: dts: qcom: Add qcs6490-rubikpi3 board dts
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 1410 ++++++++++++++++++++
3 files changed, 1412 insertions(+)
---
base-commit: 92fd6e84175befa1775e5c0ab682938eca27c0b2
change-id: 20251125-rubikpi-next-20251125-1f2fb36d8917
Best regards,
--
Hongyang Zhao <hongyang.zhao@...ndersoft.com>
Powered by blists - more mailing lists