| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <202511260654.WytXohFH-lkp@intel.com>
Date: Wed, 26 Nov 2025 07:05:44 +0800
From: kernel test robot <lkp@...el.com>
To: Svyatoslav Ryhel <clamor95@...il.com>
Cc: llvm@...ts.linux.dev, oe-kbuild-all@...ts.linux.dev,
linux-kernel@...r.kernel.org, Dmitry Baryshkov <lumag@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>
Subject: drivers/gpu/drm/bridge/ssd2825.c:484:13: warning: stack frame size
(20088) exceeds limit (8192) in 'ssd2825_bridge_atomic_pre_enable'
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: 30f09200cc4aefbd8385b01e41bde2e4565a6f0e
commit: 55023abe6a2921a8916b623c24208e1971b88729 drm: bridge: Add support for Solomon SSD2825 RGB/DSI bridge
date: 4 months ago
config: x86_64-randconfig-071-20251126 (https://download.01.org/0day-ci/archive/20251126/202511260654.WytXohFH-lkp@intel.com/config)
compiler: clang version 20.1.8 (https://github.com/llvm/llvm-project 87f0227cb60147a26a1eeb4fb06e3b505e9c7261)
rustc: rustc 1.88.0 (6b00bc388 2025-06-23)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251126/202511260654.WytXohFH-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@...el.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202511260654.WytXohFH-lkp@intel.com/
All warnings (new ones prefixed by >>):
>> drivers/gpu/drm/bridge/ssd2825.c:484:13: warning: stack frame size (20088) exceeds limit (8192) in 'ssd2825_bridge_atomic_pre_enable' [-Wframe-larger-than]
484 | static void ssd2825_bridge_atomic_pre_enable(struct drm_bridge *bridge,
| ^
1 warning generated.
vim +/ssd2825_bridge_atomic_pre_enable +484 drivers/gpu/drm/bridge/ssd2825.c
483
> 484 static void ssd2825_bridge_atomic_pre_enable(struct drm_bridge *bridge,
485 struct drm_atomic_state *state)
486 {
487 struct ssd2825_priv *priv = bridge_to_ssd2825(bridge);
488 struct mipi_dsi_device *dsi_dev = priv->output.dev;
489 const struct drm_crtc_state *crtc_state;
490 const struct drm_display_mode *mode;
491 struct drm_connector *connector;
492 struct drm_crtc *crtc;
493 u32 input_bus_flags = bridge->timings->input_bus_flags;
494 u16 flags = 0, config;
495 u8 pixel_format;
496 int ret;
497
498 /* Power Sequence */
499 ret = clk_prepare_enable(priv->tx_clk);
500 if (ret)
501 dev_err(priv->dev, "error enabling tx_clk (%d)\n", ret);
502
503 ret = regulator_bulk_enable(ARRAY_SIZE(ssd2825_supplies), priv->supplies);
504 if (ret)
505 dev_err(priv->dev, "error enabling regulators (%d)\n", ret);
506
507 usleep_range(1000, 2000);
508
509 ssd2825_hw_reset(priv);
510
511 /* Perform SW reset */
512 ssd2825_write_reg(priv, SSD2825_OPERATION_CTRL_REG, 0x0100);
513
514 /* Set pixel format */
515 switch (dsi_dev->format) {
516 case MIPI_DSI_FMT_RGB565:
517 pixel_format = 0x00;
518 break;
519 case MIPI_DSI_FMT_RGB666_PACKED:
520 pixel_format = 0x01;
521 break;
522 case MIPI_DSI_FMT_RGB666:
523 pixel_format = 0x02;
524 break;
525 case MIPI_DSI_FMT_RGB888:
526 default:
527 pixel_format = 0x03;
528 break;
529 }
530
531 connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
532 crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
533 crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
534 mode = &crtc_state->adjusted_mode;
535
536 /* Set panel timings */
537 ssd2825_write_reg(priv, SSD2825_RGB_INTERFACE_CTRL_REG_1,
538 ((mode->vtotal - mode->vsync_end) << 8) |
539 (mode->htotal - mode->hsync_end));
540 ssd2825_write_reg(priv, SSD2825_RGB_INTERFACE_CTRL_REG_2,
541 ((mode->vtotal - mode->vsync_start) << 8) |
542 (mode->htotal - mode->hsync_start));
543 ssd2825_write_reg(priv, SSD2825_RGB_INTERFACE_CTRL_REG_3,
544 ((mode->vsync_start - mode->vdisplay) << 8) |
545 (mode->hsync_start - mode->hdisplay));
546 ssd2825_write_reg(priv, SSD2825_RGB_INTERFACE_CTRL_REG_4, mode->hdisplay);
547 ssd2825_write_reg(priv, SSD2825_RGB_INTERFACE_CTRL_REG_5, mode->vdisplay);
548
549 if (mode->flags & DRM_MODE_FLAG_PHSYNC)
550 flags |= SSD2825_HSYNC_HIGH;
551
552 if (mode->flags & DRM_MODE_FLAG_PVSYNC)
553 flags |= SSD2825_VSYNC_HIGH;
554
555 if (dsi_dev->mode_flags & MIPI_DSI_MODE_VIDEO)
556 flags |= SSD2825_NON_BURST_EV;
557
558 if (input_bus_flags & DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE)
559 flags |= SSD2825_PCKL_HIGH;
560
561 ssd2825_write_reg(priv, SSD2825_RGB_INTERFACE_CTRL_REG_6, flags | pixel_format);
562 ssd2825_write_reg(priv, SSD2825_LANE_CONFIGURATION_REG, dsi_dev->lanes - 1);
563 ssd2825_write_reg(priv, SSD2825_TEST_REG, 0x0004);
564
565 /* Call PLL configuration */
566 ssd2825_setup_pll(priv, mode);
567
568 usleep_range(10000, 11000);
569
570 config = SSD2825_CONF_REG_HS | SSD2825_CONF_REG_CKE | SSD2825_CONF_REG_DCS |
571 SSD2825_CONF_REG_ECD | SSD2825_CONF_REG_EOT;
572
573 if (dsi_dev->mode_flags & MIPI_DSI_MODE_LPM)
574 config &= ~SSD2825_CONF_REG_HS;
575
576 if (dsi_dev->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET)
577 config &= ~SSD2825_CONF_REG_EOT;
578
579 /* Initial DSI configuration register set */
580 ssd2825_write_reg(priv, SSD2825_CONFIGURATION_REG, config);
581 ssd2825_write_reg(priv, SSD2825_VC_CTRL_REG, 0);
582
583 if (priv->output.panel)
584 drm_panel_enable(priv->output.panel);
585 }
586
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
Powered by blists - more mailing lists