| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251125-judyln-dts-v4-1-a5a60500b267@postmarketos.org>
Date: Tue, 25 Nov 2025 00:12:31 -0800
From: Paul Sajna <sajattack@...tmarketos.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, David Heidelberg <david@...t.cz>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
Amir Dahan <system64fumo@...tonmail.com>,
Christopher Brown <crispybrown@...il.com>,
Paul Sajna <sajattack@...tmarketos.org>,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Subject: [PATCH v4 01/12] arm64: dts: qcom: sdm845-lg-common: Sort nodes
and properties
Improve adherance to style guidelines below:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html
Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@...tmarketos.org>
---
arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 144 ++++++++++++++-----------
1 file changed, 82 insertions(+), 62 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 0ee2f4b99fbd..b8ab64a8de1c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -38,11 +38,6 @@ reserved-memory {
#size-cells = <2>;
ranges;
- qseecom_mem: memory@...00000 {
- reg = <0 0xb2000000 0 0x1800000>;
- no-map;
- };
-
gpu_mem: memory@...15000 {
reg = <0 0x8c415000 0 0x2000>;
no-map;
@@ -99,7 +94,12 @@ memory@...00000 {
no-map;
};
- rmtfs_mem: rmtfs-region@...00000 {
+ qseecom_mem: memory@...00000 {
+ reg = <0 0xb2000000 0 0x1800000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@...01000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0xf0800000 0 0x202000>;
qcom,use-guard-pages;
@@ -467,14 +467,22 @@ &mss_pil {
status = "okay";
};
+&pm8998_gpios {
+ vol_up_pin_a: vol-up-active-state {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+};
+
&pm8998_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&sdhc_2 {
- status = "okay";
-
cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -482,26 +490,70 @@ &sdhc_2 {
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vddpx_2>;
+
+ status = "okay";
};
-/*
- * UFS works partially and only with clk_ignore_unused.
- * Sometimes it crashes with I/O errors.
- */
-&ufs_mem_hc {
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&tlmm {
+ gpio-reserved-ranges = <28 4>, <81 4>;
+
+ sdc2_clk: sdc2-clk-state {
+ pins = "sdc2_clk";
+ bias-disable;
+
+ /*
+ * It seems that mmc_test reports errors if drive
+ * strength is not 16 on clk, cmd, and data pins.
+ *
+ * TODO: copy-pasted from mtp, try other values
+ * on these devices.
+ */
+ drive-strength = <16>;
+ };
+
+ sdc2_cmd: sdc2-cmd-state {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+
+ sdc2_data: sdc2-data-state {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+
+ sd_card_det_n: sd-card-det-n-state {
+ pins = "gpio126";
+ function = "gpio";
+ bias-pull-up;
+ };
+};
+
+&qupv3_id_0 {
status = "okay";
+};
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l20a_2p95>;
vcc-max-microamp = <600000>;
-};
-&ufs_mem_phy {
status = "okay";
+};
+&ufs_mem_phy {
vdda-phy-supply = <&vdda_ufs1_core>;
vdda-pll-supply = <&vdda_ufs1_1p2>;
+
+ status = "okay";
};
&usb_1 {
@@ -514,8 +566,6 @@ &usb_1_dwc3 {
};
&usb_1_hsphy {
- status = "okay";
-
vdd-supply = <&vdda_usb1_ss_core>;
vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
@@ -524,59 +574,29 @@ &usb_1_hsphy {
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-&usb_1_qmpphy {
status = "okay";
+};
+&usb_1_qmpphy {
vdda-phy-supply = <&vdda_usb1_ss_1p2>;
vdda-pll-supply = <&vdda_usb1_ss_core>;
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&tlmm {
- gpio-reserved-ranges = <28 4>, <81 4>;
-
- sdc2_clk: sdc2-clk-state {
- pins = "sdc2_clk";
- bias-disable;
- /*
- * It seems that mmc_test reports errors if drive
- * strength is not 16 on clk, cmd, and data pins.
- *
- * TODO: copy-pasted from mtp, try other values
- * on these devices.
- */
- drive-strength = <16>;
- };
+ status = "okay";
+};
- sdc2_cmd: sdc2-cmd-state {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <16>;
- };
+&venus {
+ status = "okay";
+};
- sdc2_data: sdc2-data-state {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <16>;
- };
+&wifi {
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
- sd_card_det_n: sd-card-det-n-state {
- pins = "gpio126";
- function = "gpio";
- bias-pull-up;
- };
-};
+ qcom,snoc-host-cap-skip-quirk;
-&pm8998_gpios {
- vol_up_pin_a: vol-up-active-state {
- pins = "gpio6";
- function = "normal";
- input-enable;
- bias-pull-up;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- };
+ status = "okay";
};
--
2.52.0
Powered by blists - more mailing lists