linux-kernel - Re: [PATCH 1/2] arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable SLPI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <2c7fc579-6d46-4821-9059-4ccce589ffdb@ixit.cz>
Date: Wed, 26 Nov 2025 15:59:48 +0100
From: David Heidelberg <david@...t.cz>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
 longnoserob@...il.com
Cc: Bjorn Andersson <andersson@...nel.org>,
 Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
 devicetree@...r.kernel.org, phone-devel@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable
 SLPI

On 26/11/2025 15:41, Dmitry Baryshkov wrote:
> On Wed, Nov 26, 2025 at 09:08:35PM +0900, Robert Eckelmann via B4 Relay wrote:
>> From: Robert Eckelmann <longnoserob@...il.com>
>>
>> Enable the SLPI dsp on the Xiaomi Pocophone F1 with Qualcom SDM845 SoC.
>>
>> Signed-off-by: Robert Eckelmann <longnoserob@...il.com>
>> Signed-off-by: David Heidelberg <david@...t.cz>
>> ---
>>   arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
>> index 785006a15e97..0fb1d7e724c4 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
>> @@ -425,6 +425,12 @@ &sdhc_2 {
>>   	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
>>   };
>>   
>> +&slpi_pas {
>> +	firmware-name = "qcom/sdm845/beryllium/slpi.mbn";
> 
> qcom/sdm845/Xiaomi/beryllium/slpi.mbn

Could be this change done for all the firmware files at once but later?

Currently all the firmwares using this legacy path.

David

[...]