| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251126-feature_tilcdc-v1-4-49b9ef2e3aa0@bootlin.com>
Date: Wed, 26 Nov 2025 18:35:46 +0100
From: "Kory Maincent (TI.com)" <kory.maincent@...tlin.com>
To: Jyri Sarha <jyri.sarha@....fi>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Russell King <linux@...linux.org.uk>,
Bartosz Golaszewski <brgl@...ev.pl>, Tony Lindgren <tony@...mide.com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>, Jernej Skrabec <jernej.skrabec@...il.com>
Cc: Markus Schneider-Pargmann <msp@...libre.com>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Louis Chauvet <louis.chauvet@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Miguel Gazquez <miguel.gazquez@...tlin.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-omap@...r.kernel.org,
"Kory Maincent (TI.com)" <kory.maincent@...tlin.com>
Subject: [PATCH 04/21] drm/tilcdc: Add support for DRM bus flags and
simplify panel config
Migrate CRTC mode configuration to use standard DRM bus flags in
preparation for removing the tilcdc_panel driver and its custom
tilcdc_panel_info structure.
Add support for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE and
DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE flags to control pixel clock and sync
signal edge polarity, while maintaining backward compatibility with the
existing tilcdc panel info structure.
Simplify several hardware parameters by setting them to fixed defaults
based on common usage across existing device trees:
- DMA burst size: 16 (previously configurable via switch statement)
- AC bias frequency: 255 (previously panel-specific)
- FIFO DMA request delay: 128 (previously panel-specific)
These parameters show no variation in real-world usage, so hardcoding
them simplifies the driver without losing functionality.
Preserve FIFO threshold configurability by adding a new "fifo-threshold"
device tree property at the display controller level, as this parameter
varies across different display configurations in existing device trees.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@...tlin.com>
---
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 48 ++++++++++++++----------------------
drivers/gpu/drm/tilcdc/tilcdc_drv.c | 2 ++
drivers/gpu/drm/tilcdc/tilcdc_drv.h | 2 ++
3 files changed, 22 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index b06b1453db2dd..1b5475c48f6ad 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -285,27 +285,15 @@ static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
/* Configure the Burst Size and fifo threshold of DMA: */
reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
- switch (info->dma_burst_sz) {
- case 1:
- reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
- break;
- case 2:
- reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
- break;
- case 4:
- reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
- break;
- case 8:
- reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
- break;
- case 16:
- reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
- break;
- default:
- dev_err(dev->dev, "invalid burst size\n");
- return;
+ /* Use 16 bit DMA burst size by default */
+ reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
+ if (priv->fifo_th) {
+ int fifo_th_val = const_ilog2(priv->fifo_th) - 3;
+
+ reg |= (fifo_th_val << 8);
+ } else {
+ reg |= (info->fifo_th << 8);
}
- reg |= (info->fifo_th << 8);
tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
/* Configure timings: */
@@ -321,8 +309,8 @@ static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
/* Set AC Bias Period and Number of Transitions per Interrupt: */
reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
- reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
- LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
+ /* Use 255 AC Bias Pin Frequency by default */
+ reg |= LCDC_AC_BIAS_FREQUENCY(255);
/*
* subtract one from hfp, hbp, hsw because the hardware uses
@@ -392,20 +380,20 @@ static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
return;
}
}
- reg |= info->fdd << 12;
+ /* Use 128 FIFO DMA Request Delay by default */
+ reg |= 128 << 12;
tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
- if (info->invert_pxl_clk)
+ if (info->invert_pxl_clk ||
+ mode->flags == DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
else
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
- if (info->sync_ctrl)
- tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
- else
- tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
-
- if (info->sync_edge)
+ tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
+ if (info->sync_edge ||
+ mode->flags == DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE)
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
else
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
index 3dcbec312bacb..76eb336b5d4e7 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
@@ -309,6 +309,8 @@ static int tilcdc_init(const struct drm_driver *ddrv, struct device *dev)
DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
+ of_property_read_u32(node, "fifo-threshold", &priv->fifo_th);
+
ret = tilcdc_crtc_create(ddev);
if (ret < 0) {
dev_err(dev, "failed to create crtc\n");
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
index 3aba3a1155ba0..79078b4ae7393 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
@@ -61,6 +61,8 @@ struct tilcdc_drm_private {
*/
uint32_t max_width;
+ u32 fifo_th;
+
/* Supported pixel formats */
const uint32_t *pixelformats;
uint32_t num_pixelformats;
--
2.43.0
Powered by blists - more mailing lists