[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <77d07725eac2d6b156685840018c4fff93871734.camel@intel.com>
Date: Wed, 26 Nov 2025 23:14:23 +0000
From: "Edgecombe, Rick P" <rick.p.edgecombe@...el.com>
To: "kvm@...r.kernel.org" <kvm@...r.kernel.org>, "linux-coco@...ts.linux.dev"
<linux-coco@...ts.linux.dev>, "Huang, Kai" <kai.huang@...el.com>, "Li,
Xiaoyao" <xiaoyao.li@...el.com>, "Hansen, Dave" <dave.hansen@...el.com>,
"Zhao, Yan Y" <yan.y.zhao@...el.com>, "Wu, Binbin" <binbin.wu@...el.com>,
"kas@...nel.org" <kas@...nel.org>, "seanjc@...gle.com" <seanjc@...gle.com>,
"mingo@...hat.com" <mingo@...hat.com>, "pbonzini@...hat.com"
<pbonzini@...hat.com>, "tglx@...utronix.de" <tglx@...utronix.de>, "Yamahata,
Isaku" <isaku.yamahata@...el.com>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "Annapurve, Vishal" <vannapurve@...gle.com>,
"Gao, Chao" <chao.gao@...el.com>, "bp@...en8.de" <bp@...en8.de>,
"x86@...nel.org" <x86@...nel.org>
CC: "kirill.shutemov@...ux.intel.com" <kirill.shutemov@...ux.intel.com>
Subject: Re: [PATCH v4 01/16] x86/tdx: Move all TDX error defines into
<asm/shared/tdx_errno.h>
On Tue, 2025-11-25 at 22:30 +0000, Huang, Kai wrote:
> > --- a/arch/x86/kvm/vmx/tdx_errno.h
> > +++ b/arch/x86/include/asm/shared/tdx_errno.h
> > @@ -1,14 +1,16 @@
> > /* SPDX-License-Identifier: GPL-2.0 */
> > -/* architectural status code for SEAMCALL */
> > +#ifndef _X86_SHARED_TDX_ERRNO_H
> > +#define _X86_SHARED_TDX_ERRNO_H
>
> AFAICT other files under asm/shared/ all use
>
> #ifdef _ASM_X86_SHARED_xx_H
> ...
>
> I guess it's better to follow this pattern.
Oh, wow you're right. Will update it.
>
> >
> > -#ifndef __KVM_X86_TDX_ERRNO_H
> > -#define __KVM_X86_TDX_ERRNO_H
> > +#include <asm/trapnr.h>
> >
> > +/* Upper 32 bit of the TDX error code encodes the status */
> > #define TDX_SEAMCALL_STATUS_MASK 0xFFFFFFFF00000000ULL
> >
> > /*
> > - * TDX SEAMCALL Status Codes (returned in RAX)
> > + * TDX SEAMCALL Status Codes
>
> Nit:
>
> I don't quite follow this change. Just curious: is it because "returned in
> RAX"
> doesn't apply to all error codes any more?
This change was originally from Kiryl. I'm not sure. AFAIK they should all be
RAX. I'd be fine to remove it, but I do think the RAX part is a bit extraneous.
But this patch doesn't require it, so happy to shrink the diff.
>
> > */
> > +#define TDX_SUCCESS 0ULL
> > #define TDX_NON_RECOVERABLE_VCPU 0x4000000100000000ULL
> > #define TDX_NON_RECOVERABLE_TD 0x4000000200000000ULL
> > #define TDX_NON_RECOVERABLE_TD_NON_ACCESSIBLE 0x6000000500000000ULL
> > @@ -17,6 +19,7 @@
> > #define TDX_OPERAND_INVALID 0xC000010000000000ULL
> > #define TDX_OPERAND_BUSY 0x8000020000000000ULL
> > #define TDX_PREVIOUS_TLB_EPOCH_BUSY 0x8000020100000000ULL
> > +#define TDX_RND_NO_ENTROPY 0x8000020300000000ULL
> > #define TDX_PAGE_METADATA_INCORRECT 0xC000030000000000ULL
> > #define
> > TDX_VCPU_NOT_ASSOCIATED 0x8000070200000000ULL
> > #define TDX_KEY_GENERATION_FAILED 0x8000080000000000ULL
> > @@ -28,6 +31,20 @@
> > #define TDX_EPT_ENTRY_STATE_INCORRECT 0xC0000B0D00000000ULL
> > #define
> > TDX_METADATA_FIELD_NOT_READABLE 0xC0000C0200000000ULL
> >
> > +/*
> > + * SW-defined error codes.
> > + *
> > + * Bits 47:40 == 0xFF indicate Reserved status code class that never used
> > by
> > + * TDX module.
> > + */
> > +#define TDX_ERROR _BITULL(63)
> > +#define TDX_NON_RECOVERABLE _BITULL(62)
> > +#define TDX_SW_ERROR (TDX_ERROR | GENMASK_ULL(47, 40))
> > +#define TDX_SEAMCALL_VMFAILINVALID (TDX_SW_ERROR | _ULL(0xFFFF0000))
> > +
> > +#define TDX_SEAMCALL_GP (TDX_SW_ERROR |
> > X86_TRAP_GP)
> > +#define TDX_SEAMCALL_UD (TDX_SW_ERROR |
> > X86_TRAP_UD)
> > +
> > /*
> > * TDX module operand ID, appears in 31:0 part of error code as
> > * detail information
> > @@ -37,4 +54,4 @@
> > #define TDX_OPERAND_ID_SEPT 0x92
> > #define TDX_OPERAND_ID_TD_EPOCH 0xa9
> >
> > -#endif /* __KVM_X86_TDX_ERRNO_H */
> > +#endif /* _X86_SHARED_TDX_ERRNO_H */
> > diff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h
> > index 6b338d7f01b7..2f3e16b93b4c 100644
> > --- a/arch/x86/include/asm/tdx.h
> > +++ b/arch/x86/include/asm/tdx.h
> > @@ -12,26 +12,6 @@
> > #include <asm/trapnr.h>
>
> I think you can remove <asm/trapnr.h> here since now <asm/tdx.h> is no longer
> using any definitions from it. And <asm/shared/tdx_errno.h> now includes it
> directly.
Yep, you're right.
Powered by blists - more mailing lists