| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251126-add-support-for-camss-on-sm8750-v1-4-646fee2eb720@oss.qualcomm.com>
Date: Wed, 26 Nov 2025 01:38:37 -0800
From: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
To: Loic Poulain <loic.poulain@....qualcomm.com>,
Robert Foss <rfoss@...nel.org>, Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Todor Tomov <todor.too@...il.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Cc: linux-i2c@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org,
jeyaprakash.soundrapandian@....qualcomm.com,
Vijay Kumar Tumati <vijay.tumati@....qualcomm.com>,
Hangxiang Ma <hangxiang.ma@....qualcomm.com>
Subject: [PATCH 4/7] media: qcom: camss: csiphy: Add support for v2.3.0
two-phase CSIPHY
Add more detailed resource information for CSIPHY devices in the camss
driver along with the support for v2.3.0 in the 2 phase CSIPHY driver
that is responsible for the PHY lane register configuration, module
reset and interrupt handling.
Additionally, generalize the struct name for the lane configuration that
had been added for Kaanapali and use it for SM8750 as well as they share
the settings.
Signed-off-by: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
---
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 11 ++-
drivers/media/platform/qcom/camss/camss.c | 107 +++++++++++++++++++++
2 files changed, 114 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index f9db7e195dfe..157e946f67db 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -684,9 +684,9 @@ csiphy_lane_regs lane_regs_sm8650[] = {
{0x0c10, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
};
-/* 3nm 2PH v 2.4.0 2p5Gbps 4 lane DPHY mode */
+/* 3nm 2PH v 2.3.0/2.4.0 2p5Gbps 4 lane DPHY mode */
static const struct
-csiphy_lane_regs lane_regs_kaanapali[] = {
+csiphy_lane_regs lane_regs_v_2_3[] = {
/* LN 0 */
{0x0094, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
{0x00A0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
@@ -1134,6 +1134,7 @@ static bool csiphy_is_gen2(u32 version)
case CAMSS_845:
case CAMSS_8550:
case CAMSS_8650:
+ case CAMSS_8750:
case CAMSS_8775P:
case CAMSS_KAANAPALI:
case CAMSS_X1E80100:
@@ -1250,9 +1251,11 @@ static int csiphy_init(struct csiphy_device *csiphy)
regs->lane_regs = &lane_regs_sa8775p[0];
regs->lane_array_size = ARRAY_SIZE(lane_regs_sa8775p);
break;
+ case CAMSS_8750:
case CAMSS_KAANAPALI:
- regs->lane_regs = &lane_regs_kaanapali[0];
- regs->lane_array_size = ARRAY_SIZE(lane_regs_kaanapali);
+ /* CSPHY v2.4.0 is backward compatible with v2.3.0 settings */
+ regs->lane_regs = &lane_regs_v_2_3[0];
+ regs->lane_array_size = ARRAY_SIZE(lane_regs_v_2_3);
regs->offset = 0x1000;
regs->common_status_offset = 0x138;
break;
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 805e2fbd97dd..bfc942635682 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -3870,6 +3870,111 @@ static const struct resources_icc icc_res_sa8775p[] = {
},
};
+static const struct camss_subdev_resources csiphy_res_8750[] = {
+ /* CSIPHY0 */
+ {
+ .regulators = { "vdd-csiphy0-0p88", "vdd-csiphy0-1p2" },
+ .clock = { "csiphy0", "csiphy0_timer",
+ "cam_top_ahb", "cam_top_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" },
+ .csiphy = {
+ .id = 0,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY1 */
+ {
+ .regulators = { "vdd-csiphy1-0p88", "vdd-csiphy1-1p2" },
+ .clock = { "csiphy1", "csiphy1_timer",
+ "cam_top_ahb", "cam_top_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" },
+ .csiphy = {
+ .id = 1,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY2 */
+ {
+ .regulators = { "vdd-csiphy2-0p88", "vdd-csiphy2-1p2" },
+ .clock = { "csiphy2", "csiphy2_timer",
+ "cam_top_ahb", "cam_top_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" },
+ .csiphy = {
+ .id = 2,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY3 */
+ {
+ .regulators = { "vdd-csiphy3-0p88", "vdd-csiphy3-1p2" },
+ .clock = { "csiphy3", "csiphy3_timer",
+ "cam_top_ahb", "cam_top_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy3" },
+ .interrupt = { "csiphy3" },
+ .csiphy = {
+ .id = 3,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY4 */
+ {
+ .regulators = { "vdd-csiphy4-0p88", "vdd-csiphy4-1p2" },
+ .clock = { "csiphy4", "csiphy4_timer",
+ "cam_top_ahb", "cam_top_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy4" },
+ .interrupt = { "csiphy4" },
+ .csiphy = {
+ .id = 4,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY5 */
+ {
+ .regulators = { "vdd-csiphy5-0p88", "vdd-csiphy5-1p2" },
+ .clock = { "csiphy5", "csiphy5_timer",
+ "cam_top_ahb", "cam_top_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy5" },
+ .interrupt = { "csiphy5" },
+ .csiphy = {
+ .id = 5,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+};
+
static const struct resources_icc icc_res_sm8750[] = {
{
.name = "ahb",
@@ -5300,7 +5405,9 @@ static const struct camss_resources sm8650_resources = {
static const struct camss_resources sm8750_resources = {
.version = CAMSS_8750,
.pd_name = "top",
+ .csiphy_res = csiphy_res_8750,
.icc_res = icc_res_sm8750,
+ .csiphy_num = ARRAY_SIZE(csiphy_res_8750),
.icc_path_num = ARRAY_SIZE(icc_res_sm8750),
};
--
2.34.1
Powered by blists - more mailing lists