| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <47e40d25-59c8-4dc8-aa55-4a1da6adf85f@linaro.org>
Date: Thu, 27 Nov 2025 10:16:05 +0000
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: Hangxiang Ma <hangxiang.ma@....qualcomm.com>,
Loic Poulain <loic.poulain@....qualcomm.com>, Robert Foss
<rfoss@...nel.org>, Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Todor Tomov <todor.too@...il.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
aiqun.yu@....qualcomm.com, tingwei.zhang@....qualcomm.com,
trilok.soni@....qualcomm.com, yijie.yang@....qualcomm.com,
Jingyi Wang <jingyi.wang@....qualcomm.com>,
Atiya Kailany <atiya.kailany@....qualcomm.com>
Subject: Re: [PATCH v7 5/5] media: qcom: camss: vfe: Add support for VFE 1080
On 21/11/2025 04:43, Hangxiang Ma wrote:
> Add Video Front End (VFE) version 1080 as found on the Kaanapali SoC.
>
> The FULL front end modules in Kaanapali camera subsystem are called TFEs
> (Thin Front End), however, retaining the name VFE at places to maintain
> consistency and avoid unnecessary code changes.
>
> This change limits the VFE output lines to 3 for now as constrained by
> the CAMSS driver framework.
>
> Kaanapali architecture requires for the REG_UPDATE and AUP_UPDATE to be
> issued after all of the CSID configuration has been done. Additionally,
> the number of AUP_UPDATEs should match the number of buffers enqueued to
> the write master while it's being enabled.
>
> Although the real time data from TFE goes through the RT_CAMNOC, we are
> required to enable both the camnoc_rt_axi and camnoc_nrt_axi clocks for
> the PDX_NOC, that follows both the RT and NRT NOCs in this architecture,
> to ensure that both of the latter are idle after reset.
>
> Co-developed-by: Atiya Kailany <atiya.kailany@....qualcomm.com>
> Signed-off-by: Atiya Kailany <atiya.kailany@....qualcomm.com>
> Signed-off-by: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
> ---
> drivers/media/platform/qcom/camss/Makefile | 1 +
> drivers/media/platform/qcom/camss/camss-vfe-1080.c | 197 +++++++++++++++++++++
> drivers/media/platform/qcom/camss/camss-vfe.c | 9 +-
> drivers/media/platform/qcom/camss/camss-vfe.h | 2 +
> drivers/media/platform/qcom/camss/camss.c | 143 +++++++++++++++
> 5 files changed, 350 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
> index 3a7ed4f5a004..dc41b0d6dc21 100644
> --- a/drivers/media/platform/qcom/camss/Makefile
> +++ b/drivers/media/platform/qcom/camss/Makefile
> @@ -22,6 +22,7 @@ qcom-camss-objs += \
> camss-vfe-340.o \
> camss-vfe-480.o \
> camss-vfe-680.o \
> + camss-vfe-1080.o \
> camss-vfe-gen3.o \
> camss-vfe-gen1.o \
> camss-vfe.o \
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-1080.c b/drivers/media/platform/qcom/camss/camss-vfe-1080.c
> new file mode 100644
> index 000000000000..9ad3dee2e80b
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-1080.c
> @@ -0,0 +1,197 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * camss-vfe-1080.c
> + *
> + * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v1080
> + *
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +
> +#include "camss.h"
> +#include "camss-vfe.h"
> +
> +/* VFE-1080 Bus Register Base Addresses */
> +#define BUS_REG_BASE (vfe_is_lite(vfe) ? 0x800 : 0x1000)
> +
> +#define VFE_BUS_WM_CGC_OVERRIDE (BUS_REG_BASE + 0x08)
> +#define WM_CGC_OVERRIDE_ALL (0x7FFFFFF)
> +
> +#define VFE_BUS_WM_TEST_BUS_CTRL (BUS_REG_BASE + 0x128)
> +
> +#define VFE_BUS_WM_CFG(n) (BUS_REG_BASE + 0x500 + (n) * 0x100)
> +#define WM_CFG_EN BIT(0)
> +#define WM_VIR_FRM_EN BIT(1)
> +#define WM_CFG_MODE BIT(16)
> +#define VFE_BUS_WM_IMAGE_ADDR(n) (BUS_REG_BASE + 0x504 + (n) * 0x100)
> +#define VFE_BUS_WM_FRAME_INCR(n) (BUS_REG_BASE + 0x508 + (n) * 0x100)
> +#define VFE_BUS_WM_IMAGE_CFG_0(n) (BUS_REG_BASE + 0x50C + (n) * 0x100)
> +#define WM_IMAGE_CFG_0_DEFAULT_WIDTH (0xFFFF)
> +#define VFE_BUS_WM_IMAGE_CFG_2(n) (BUS_REG_BASE + 0x514 + (n) * 0x100)
> +#define WM_IMAGE_CFG_2_DEFAULT_STRIDE (0xFFFF)
> +#define VFE_BUS_WM_PACKER_CFG(n) (BUS_REG_BASE + 0x518 + (n) * 0x100)
> +
> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n) (BUS_REG_BASE + 0x530 + (n) * 0x100)
> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n) (BUS_REG_BASE + 0x534 + (n) * 0x100)
> +
> +/* VFE lite has no such registers */
> +#define VFE_BUS_WM_FRAMEDROP_PERIOD(n) (BUS_REG_BASE + 0x538 + (n) * 0x100)
> +#define VFE_BUS_WM_FRAMEDROP_PATTERN(n) (BUS_REG_BASE + 0x53C + (n) * 0x100)
> +
> +#define VFE_BUS_WM_MMU_PREFETCH_CFG(n) (BUS_REG_BASE + 0x560 + (n) * 0x100)
> +#define VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(n) (BUS_REG_BASE + 0x564 + (n) * 0x100)
> +
> +/*
> + * IFE write master client IDs
> + *
> + * VIDEO_FULL 0
> + * VIDEO_DC4_Y 1
> + * VIDEO_DC4_C 2
> + * VIDEO_DC16_Y 3
> + * VIDEO_DC16_C 4
> + * DISPLAY_DS2_Y 5
> + * DISPLAY_DS2_C 6
> + * FD_Y 7
> + * FD_C 8
> + * PIXEL_RAW 9
> + * STATS_AEC_BG 10
> + * STATS_AEC_BHIST 11
> + * STATS_TINTLESS_BG 12
> + * STATS_AWB_BG 13
> + * STATS_AWB_BFW 14
> + * STATS_AF_BHIST 15
> + * STATS_ALSC_BG 16
> + * STATS_FLICKER_BAYERRS 17
> + * STATS_TMC_BHIST 18
> + * PDAF_0 19
> + * PDAF_1 20
> + * PDAF_2 21
> + * PDAF_3 22
> + * RDI0 23
> + * RDI1 24
> + * RDI2 25
> + * RDI3 26
> + * RDI4 27
> + *
> + * IFE Lite write master client IDs
> + *
> + * RDI0 0
> + * RDI1 1
> + * RDI2 2
> + * RDI3 3
> + * GAMMA 4
> + * STATES_BE 5
> + */
> +#define RDI_WM(n) ((vfe_is_lite(vfe) ? 0x0 : 0x17) + (n))
> +
> +static void vfe_wm_start_1080(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
> +{
> + struct v4l2_pix_format_mplane *pix =
> + &line->video_out.active_fmt.fmt.pix_mp;
> +
> + wm = RDI_WM(wm);
> +
> + /* no clock gating at bus input */
> + writel(WM_CGC_OVERRIDE_ALL, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
> +
> + writel(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
> +
> + writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height >> 8,
> + vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
> + writel((WM_IMAGE_CFG_0_DEFAULT_WIDTH & 0xFFFF),
> + vfe->base + VFE_BUS_WM_IMAGE_CFG_0(wm));
> + writel(WM_IMAGE_CFG_2_DEFAULT_STRIDE,
> + vfe->base + VFE_BUS_WM_IMAGE_CFG_2(wm));
> + writel(0, vfe->base + VFE_BUS_WM_PACKER_CFG(wm));
> +
> + /* no dropped frames, one irq per frame */
> + if (!vfe_is_lite(vfe)) {
> + writel(0, vfe->base + VFE_BUS_WM_FRAMEDROP_PERIOD(wm));
> + writel(1, vfe->base + VFE_BUS_WM_FRAMEDROP_PATTERN(wm));
> + }
> +
> + writel(0, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(wm));
> + writel(1, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(wm));
> +
> + writel(1, vfe->base + VFE_BUS_WM_MMU_PREFETCH_CFG(wm));
> + writel(0xFFFFFFFF, vfe->base + VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(wm));
> +
> + writel(WM_CFG_EN | WM_CFG_MODE, vfe->base + VFE_BUS_WM_CFG(wm));
> +}
> +
> +static void vfe_wm_stop_1080(struct vfe_device *vfe, u8 wm)
> +{
> + wm = RDI_WM(wm);
> + writel(0, vfe->base + VFE_BUS_WM_CFG(wm));
> +}
> +
> +static void vfe_wm_update_1080(struct vfe_device *vfe, u8 wm, u32 addr,
> + struct vfe_line *line)
> +{
> + wm = RDI_WM(wm);
> + writel(addr >> 8, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
> +
> + dev_dbg(vfe->camss->dev, "wm:%d, image buf addr:0x%x\n", wm, addr);
> +}
> +
> +static void vfe_reg_update_1080(struct vfe_device *vfe, enum vfe_line_id line_id)
> +{
> + int port_id = line_id;
> +
> + camss_reg_update(vfe->camss, vfe->id, port_id, false);
> +}
> +
> +static inline void vfe_reg_update_clear_1080(struct vfe_device *vfe,
> + enum vfe_line_id line_id)
> +{
> + int port_id = line_id;
> +
> + camss_reg_update(vfe->camss, vfe->id, port_id, true);
> +}
> +
> +static const struct camss_video_ops vfe_video_ops_1080 = {
> + .queue_buffer = vfe_queue_buffer_v2,
> + .flush_buffers = vfe_flush_buffers,
> +};
> +
> +static void vfe_subdev_init_1080(struct device *dev, struct vfe_device *vfe)
> +{
> + vfe->video_ops = vfe_video_ops_1080;
> +}
> +
> +static void vfe_global_reset_1080(struct vfe_device *vfe)
> +{
> + vfe_isr_reset_ack(vfe);
> +}
> +
> +static irqreturn_t vfe_isr_1080(int irq, void *dev)
> +{
> + /* nop */
> + return IRQ_HANDLED;
> +}
> +
> +static int vfe_halt_1080(struct vfe_device *vfe)
> +{
> + /* rely on vfe_disable_output() to stop the VFE */
> + return 0;
> +}
> +
> +const struct vfe_hw_ops vfe_ops_1080 = {
> + .global_reset = vfe_global_reset_1080,
> + .hw_version = vfe_hw_version,
> + .isr = vfe_isr_1080,
> + .pm_domain_off = vfe_pm_domain_off,
> + .pm_domain_on = vfe_pm_domain_on,
> + .reg_update = vfe_reg_update_1080,
> + .reg_update_clear = vfe_reg_update_clear_1080,
> + .subdev_init = vfe_subdev_init_1080,
> + .vfe_disable = vfe_disable,
> + .vfe_enable = vfe_enable_v2,
> + .vfe_halt = vfe_halt_1080,
> + .vfe_wm_start = vfe_wm_start_1080,
> + .vfe_wm_stop = vfe_wm_stop_1080,
> + .vfe_buf_done = vfe_buf_done,
> + .vfe_wm_update = vfe_wm_update_1080,
> +};
Since this patch isn't applied, you should repost this file with the
right name.
---
bod
Powered by blists - more mailing lists