| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CADUfDZo2Wg8hTv7zkzywGHomycxx0mxwDtAr5zxradxqAoNRAw@mail.gmail.com>
Date: Sat, 29 Nov 2025 11:19:05 -0800
From: Caleb Sander Mateos <csander@...estorage.com>
To: Ming Lei <ming.lei@...hat.com>
Cc: Jens Axboe <axboe@...nel.dk>, linux-block@...r.kernel.org,
Uday Shankar <ushankar@...estorage.com>, Stefani Seibold <stefani@...bold.net>,
Andrew Morton <akpm@...ux-foundation.org>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V4 09/27] ublk: add new batch command UBLK_U_IO_PREP_IO_CMDS
& UBLK_U_IO_COMMIT_IO_CMDS
On Thu, Nov 20, 2025 at 5:59 PM Ming Lei <ming.lei@...hat.com> wrote:
>
> Add new command UBLK_U_IO_PREP_IO_CMDS, which is the batch version of
> UBLK_IO_FETCH_REQ.
>
> Add new command UBLK_U_IO_COMMIT_IO_CMDS, which is for committing io command
> result only, still the batch version.
>
> The new command header type is `struct ublk_batch_io`.
>
> This patch doesn't actually implement these commands yet, just validates the
> SQE fields.
>
> Signed-off-by: Ming Lei <ming.lei@...hat.com>
Reviewed-by: Caleb Sander Mateos <csander@...estorage.com>
> ---
> drivers/block/ublk_drv.c | 85 ++++++++++++++++++++++++++++++++++-
> include/uapi/linux/ublk_cmd.h | 49 ++++++++++++++++++++
> 2 files changed, 133 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
> index c62b2f2057fe..21890947ceec 100644
> --- a/drivers/block/ublk_drv.c
> +++ b/drivers/block/ublk_drv.c
> @@ -85,6 +85,11 @@
> UBLK_PARAM_TYPE_DEVT | UBLK_PARAM_TYPE_ZONED | \
> UBLK_PARAM_TYPE_DMA_ALIGN | UBLK_PARAM_TYPE_SEGMENT)
>
> +#define UBLK_BATCH_F_ALL \
> + (UBLK_BATCH_F_HAS_ZONE_LBA | \
> + UBLK_BATCH_F_HAS_BUF_ADDR | \
> + UBLK_BATCH_F_AUTO_BUF_REG_FALLBACK)
> +
> struct ublk_uring_cmd_pdu {
> /*
> * Store requests in same batch temporarily for queuing them to
> @@ -108,6 +113,12 @@ struct ublk_uring_cmd_pdu {
> u16 tag;
> };
>
> +struct ublk_batch_io_data {
> + struct ublk_device *ub;
> + struct io_uring_cmd *cmd;
> + struct ublk_batch_io header;
> +};
> +
> /*
> * io command is active: sqe cmd is received, and its cqe isn't done
> *
> @@ -2520,10 +2531,82 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
> return ublk_ch_uring_cmd_local(cmd, issue_flags);
> }
>
> +static int ublk_check_batch_cmd_flags(const struct ublk_batch_io *uc)
> +{
> + unsigned elem_bytes = sizeof(struct ublk_elem_header);
> +
> + if (uc->flags & ~UBLK_BATCH_F_ALL)
> + return -EINVAL;
> +
> + /* UBLK_BATCH_F_AUTO_BUF_REG_FALLBACK requires buffer index */
> + if ((uc->flags & UBLK_BATCH_F_AUTO_BUF_REG_FALLBACK) &&
> + (uc->flags & UBLK_BATCH_F_HAS_BUF_ADDR))
> + return -EINVAL;
> +
> + elem_bytes += (uc->flags & UBLK_BATCH_F_HAS_ZONE_LBA ? sizeof(u64) : 0) +
> + (uc->flags & UBLK_BATCH_F_HAS_BUF_ADDR ? sizeof(u64) : 0);
> + if (uc->elem_bytes != elem_bytes)
> + return -EINVAL;
> + return 0;
> +}
> +
> +static int ublk_check_batch_cmd(const struct ublk_batch_io_data *data)
> +{
> +
> + const struct ublk_batch_io *uc = &data->header;
> +
> + if (uc->nr_elem > data->ub->dev_info.queue_depth)
> + return -E2BIG;
> +
> + if ((uc->flags & UBLK_BATCH_F_HAS_ZONE_LBA) &&
> + !ublk_dev_is_zoned(data->ub))
> + return -EINVAL;
> +
> + if ((uc->flags & UBLK_BATCH_F_HAS_BUF_ADDR) &&
> + !ublk_dev_need_map_io(data->ub))
> + return -EINVAL;
> +
> + if ((uc->flags & UBLK_BATCH_F_AUTO_BUF_REG_FALLBACK) &&
> + !ublk_dev_support_auto_buf_reg(data->ub))
> + return -EINVAL;
> +
> + return ublk_check_batch_cmd_flags(uc);
> +}
> +
> static int ublk_ch_batch_io_uring_cmd(struct io_uring_cmd *cmd,
> unsigned int issue_flags)
> {
> - return -EOPNOTSUPP;
> + const struct ublk_batch_io *uc = io_uring_sqe_cmd(cmd->sqe);
> + struct ublk_device *ub = cmd->file->private_data;
> + struct ublk_batch_io_data data = {
> + .ub = ub,
> + .cmd = cmd,
> + .header = (struct ublk_batch_io) {
> + .q_id = READ_ONCE(uc->q_id),
> + .flags = READ_ONCE(uc->flags),
> + .nr_elem = READ_ONCE(uc->nr_elem),
> + .elem_bytes = READ_ONCE(uc->elem_bytes),
> + },
> + };
> + u32 cmd_op = cmd->cmd_op;
> + int ret = -EINVAL;
> +
> + if (data.header.q_id >= ub->dev_info.nr_hw_queues)
> + goto out;
> +
> + switch (cmd_op) {
> + case UBLK_U_IO_PREP_IO_CMDS:
> + case UBLK_U_IO_COMMIT_IO_CMDS:
> + ret = ublk_check_batch_cmd(&data);
> + if (ret)
> + goto out;
> + ret = -EOPNOTSUPP;
> + break;
> + default:
> + ret = -EOPNOTSUPP;
> + }
> +out:
> + return ret;
> }
>
> static inline bool ublk_check_ubuf_dir(const struct request *req,
> diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
> index ec77dabba45b..2ce5a496b622 100644
> --- a/include/uapi/linux/ublk_cmd.h
> +++ b/include/uapi/linux/ublk_cmd.h
> @@ -102,6 +102,10 @@
> _IOWR('u', 0x23, struct ublksrv_io_cmd)
> #define UBLK_U_IO_UNREGISTER_IO_BUF \
> _IOWR('u', 0x24, struct ublksrv_io_cmd)
> +#define UBLK_U_IO_PREP_IO_CMDS \
> + _IOWR('u', 0x25, struct ublk_batch_io)
> +#define UBLK_U_IO_COMMIT_IO_CMDS \
> + _IOWR('u', 0x26, struct ublk_batch_io)
>
> /* only ABORT means that no re-fetch */
> #define UBLK_IO_RES_OK 0
> @@ -525,6 +529,51 @@ struct ublksrv_io_cmd {
> };
> };
>
> +struct ublk_elem_header {
> + __u16 tag; /* IO tag */
> +
> + /*
> + * Buffer index for incoming io command, only valid iff
> + * UBLK_F_AUTO_BUF_REG is set
> + */
> + __u16 buf_index;
> + __s32 result; /* I/O completion result (commit only) */
> +};
> +
> +/*
> + * uring_cmd buffer structure for batch commands
> + *
> + * buffer includes multiple elements, which number is specified by
> + * `nr_elem`. Each element buffer is organized in the following order:
> + *
> + * struct ublk_elem_buffer {
> + * // Mandatory fields (8 bytes)
> + * struct ublk_elem_header header;
> + *
> + * // Optional fields (8 bytes each, included based on flags)
> + *
> + * // Buffer address (if UBLK_BATCH_F_HAS_BUF_ADDR) for copying data
> + * // between ublk request and ublk server buffer
> + * __u64 buf_addr;
> + *
> + * // returned Zone append LBA (if UBLK_BATCH_F_HAS_ZONE_LBA)
> + * __u64 zone_lba;
> + * }
> + *
> + * Used for `UBLK_U_IO_PREP_IO_CMDS` and `UBLK_U_IO_COMMIT_IO_CMDS`
> + */
> +struct ublk_batch_io {
> + __u16 q_id;
> +#define UBLK_BATCH_F_HAS_ZONE_LBA (1 << 0)
> +#define UBLK_BATCH_F_HAS_BUF_ADDR (1 << 1)
> +#define UBLK_BATCH_F_AUTO_BUF_REG_FALLBACK (1 << 2)
> + __u16 flags;
> + __u16 nr_elem;
> + __u8 elem_bytes;
> + __u8 reserved;
> + __u64 reserved2;
> +};
> +
> struct ublk_param_basic {
> #define UBLK_ATTR_READ_ONLY (1 << 0)
> #define UBLK_ATTR_ROTATIONAL (1 << 1)
> --
> 2.47.0
>
Powered by blists - more mailing lists