linux-kernel - [PATCH v1 02/31] serial: 8250: add MU860 UART configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251130104222.63077-3-crescentcy.hsieh@moxa.com>
Date: Sun, 30 Nov 2025 18:41:53 +0800
From: Crescent Hsieh <crescentcy.hsieh@...a.com>
To: gregkh@...uxfoundation.org,
	jirislaby@...nel.org,
	ilpo.jarvinen@...ux.intel.com,
	andy.shevchenko@...il.com
Cc: linux-kernel@...r.kernel.org,
	linux-serial@...r.kernel.org,
	crescentcy.hsieh@...a.com
Subject: [PATCH v1 02/31] serial: 8250: add MU860 UART configuration

The MU860 UART does not fully conform to PORT_16650V2 or any other
standard UART configuration. This patch introduces a new UART type,
PORT_MU860, to accurately reflect the hardware characteristics of
MU860-based devices.

The new configuration is applied to Moxa UPCI serial boards to ensure
correct initialization and operation.

Signed-off-by: Crescent Hsieh <crescentcy.hsieh@...a.com>
---
 drivers/tty/serial/8250/8250_mxupci.c | 3 ++-
 drivers/tty/serial/8250/8250_port.c   | 8 ++++++++
 include/uapi/linux/serial_core.h      | 3 +++
 3 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_mxupci.c b/drivers/tty/serial/8250/8250_mxupci.c
index fe899ff090c4..d7a4b838ec1f 100644
--- a/drivers/tty/serial/8250/8250_mxupci.c
+++ b/drivers/tty/serial/8250/8250_mxupci.c
@@ -87,7 +87,8 @@ static int mxupci8250_probe(struct pci_dev *pdev, const struct pci_device_id *id
 	up.port.dev = &pdev->dev;
 	up.port.irq = pdev->irq;
 	up.port.uartclk = MOXA_UART_BASE_BAUD * 16;
-	up.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+	up.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+	up.port.type = PORT_MU860;
 
 	for (i = 0; i < num_ports; i++) {
 		if (serial8250_pci_setup_port(pdev, &up, FL_GET_BASE(FL_BASE2), i * MOXA_UART_OFFSET, 0))
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 649e74e9b52f..7d022315b3aa 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -319,6 +319,14 @@ static const struct serial8250_config uart_config[] = {
 		.rxtrig_bytes	= {1, 8, 16, 30},
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
 	},
+	[PORT_MU860] = {
+		.name		= "Moxa MU860 UART",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+		.rxtrig_bytes	= {1, 4, 8, 14},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 9c007a106330..49c2fcb2e24c 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -100,6 +100,9 @@
 /* TXX9 type number */
 #define PORT_TXX9	64
 
+/* Moxa MU860 UART */
+#define PORT_MU860      65
+
 /*Digi jsm */
 #define PORT_JSM        69
 
-- 
2.45.2