linux-kernel - Re: [PATCH v1 06/31] serial: 8250_mxupci: add custom handle

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAHp75VcSLY_L6Xp9LrY_qOBCUrmaEMtPTFpUPK9bJNs6L8FgiA@mail.gmail.com>
Date: Sun, 30 Nov 2025 19:20:03 +0200
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Crescent Hsieh <crescentcy.hsieh@...a.com>
Cc: gregkh@...uxfoundation.org, jirislaby@...nel.org, 
	ilpo.jarvinen@...ux.intel.com, linux-kernel@...r.kernel.org, 
	linux-serial@...r.kernel.org
Subject: Re: [PATCH v1 06/31] serial: 8250_mxupci: add custom handle_irq()

On Sun, Nov 30, 2025 at 12:43 PM Crescent Hsieh
<crescentcy.hsieh@...a.com> wrote:
>
> Add a custom handle_irq() for 8250_mxupci based on serial8250_handle_irq(),
> removing PM wakeup and DMA handling that are not needed.
>
> This prepares for future adjustments to RX and TX behavior specific to
> Moxa MU860 UART.

...

> +static int mxupci8250_handle_irq(struct uart_port *port)
> +{
> +       struct uart_8250_port *up = up_to_u8250p(port);
> +       bool skip_rx = false;
> +       unsigned long flags;
> +       u16 lsr;
> +       u8 iir;
> +
> +       iir = serial_in(up, UART_IIR);

> +

Stray blank line addition.

> +       if (iir & UART_IIR_NO_INT)
> +               return 0;
> +
> +       uart_port_lock_irqsave(port, &flags);
> +
> +       lsr = serial_lsr_in(up);

> +

Ditto.

> +       if (!(lsr & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) &&
> +           (port->status & (UPSTAT_AUTOCTS | UPSTAT_AUTORTS)) &&
> +           !(port->read_status_mask & UART_LSR_DR))
> +               skip_rx = true;
> +
> +       if (lsr & (UART_LSR_DR | UART_LSR_BI) && !skip_rx)
> +               lsr = serial8250_rx_chars(up, lsr);
> +
> +       serial8250_modem_status(up);
> +
> +       if ((lsr & UART_LSR_THRE) && (up->ier & UART_IER_THRI))
> +               serial8250_tx_chars(up);
> +
> +       uart_unlock_and_check_sysrq_irqrestore(port, flags);
> +
> +       return 1;
> +}

-- 
With Best Regards,
Andy Shevchenko