[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aS3ITHKoLF0ecw2o@lizhi-Precision-Tower-5810>
Date: Mon, 1 Dec 2025 11:54:36 -0500
From: Frank Li <Frank.li@....com>
To: Chancel Liu <chancel.liu@....com>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: imx93-14x14-evk: Add bt-sco sound card
support
On Mon, Dec 01, 2025 at 03:58:43PM +0900, Chancel Liu wrote:
> Add bt-sco sound card, which is used by BT HFP case.
> It supports wb profile as default.
>
> Signed-off-by: Chancel Liu <chancel.liu@....com>
> ---
Reviewed-by: Frank Li <Frank.Li@....com>
> .../boot/dts/freescale/imx93-14x14-evk.dts | 43 +++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
> index f9eebd27d640..e47fee24471a 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
> @@ -27,6 +27,11 @@ aliases {
> serial0 = &lpuart1;
> };
>
> + bt_sco_codec: bt-sco-codec {
> + compatible = "linux,bt-sco";
> + #sound-dai-cells = <1>;
> + };
> +
> chosen {
> stdout-path = &lpuart1;
> };
> @@ -168,6 +173,25 @@ reg_vref_1v8: regulator-adc-vref {
> regulator-max-microvolt = <1800000>;
> };
>
> + sound-bt-sco {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "bt-sco-audio";
> + simple-audio-card,format = "dsp_a";
> + simple-audio-card,bitclock-inversion;
> + simple-audio-card,frame-master = <&btcpu>;
> + simple-audio-card,bitclock-master = <&btcpu>;
> +
> + simple-audio-card,codec {
> + sound-dai = <&bt_sco_codec 1>;
> + };
> +
> + btcpu: simple-audio-card,cpu {
> + sound-dai = <&sai1>;
> + dai-tdm-slot-num = <2>;
> + dai-tdm-slot-width = <16>;
> + };
> + };
> +
> usdhc3_pwrseq: usdhc3_pwrseq {
> compatible = "mmc-pwrseq-simple";
> reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
> @@ -371,6 +395,16 @@ &mu2 {
> status = "okay";
> };
>
> +&sai1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai1>;
> + assigned-clocks = <&clk IMX93_CLK_SAI1>;
> + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> + assigned-clock-rates = <12288000>;
> + fsl,sai-mclk-direction-output;
> + status = "okay";
> +};
> +
> &usbotg1 {
> dr_mode = "otg";
> hnp-disable;
> @@ -568,6 +602,15 @@ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
> >;
> };
>
> + pinctrl_sai1: sai1grp {
> + fsl,pins = <
> + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e
> + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
> + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e
> + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e
> + >;
> + };
> +
> pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> fsl,pins = <
> MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
> --
> 2.50.1
>
Powered by blists - more mailing lists