lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <aS4W0M+ZkQzuUjtT@lizhi-Precision-Tower-5810>
Date: Mon, 1 Dec 2025 17:29:36 -0500
From: Frank Li <Frank.li@....com>
To: Dan Carpenter <dan.carpenter@...aro.org>
Cc: Jan Petrous <jan.petrous@....nxp.com>, s32@....com,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linaro-s32@...aro.org
Subject: Re: [PATCH 1/4] net: stmmac: s32: use the syscon interface
 PHY_INTF_SEL_RGMII

On Mon, Dec 01, 2025 at 04:08:20PM +0300, Dan Carpenter wrote:
> On the s32 chipset the GMAC_0_CTRL_STS register is in GPR region.
> Originally, accessing this register was done in a sort of ad-hoc way,
> but we want to use the syscon interface to do it.

What's benefit by use syscon interface here? syscon have not much
well consided funcitonal abstraction.

Frank

>
> This is a little bit uglier because we to maintain backwards compatibility
> to the old device trees so we have to support both ways to access this
> register.
>
> Signed-off-by: Dan Carpenter <dan.carpenter@...aro.org>
> ---
>  .../net/ethernet/stmicro/stmmac/dwmac-s32.c   | 23 +++++++++++++++----
>  1 file changed, 18 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
> index 5a485ee98fa7..20de761b7d28 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
> @@ -11,12 +11,14 @@
>  #include <linux/device.h>
>  #include <linux/ethtool.h>
>  #include <linux/io.h>
> +#include <linux/mfd/syscon.h>
>  #include <linux/module.h>
>  #include <linux/of_mdio.h>
>  #include <linux/of_address.h>
>  #include <linux/phy.h>
>  #include <linux/phylink.h>
>  #include <linux/platform_device.h>
> +#include <linux/regmap.h>
>  #include <linux/stmmac.h>
>
>  #include "stmmac_platform.h"
> @@ -32,6 +34,8 @@
>  struct s32_priv_data {
>  	void __iomem *ioaddr;
>  	void __iomem *ctrl_sts;
> +	struct regmap *sts_regmap;
> +	unsigned int sts_offset;
>  	struct device *dev;
>  	phy_interface_t *intf_mode;
>  	struct clk *tx_clk;
> @@ -40,7 +44,10 @@ struct s32_priv_data {
>
>  static int s32_gmac_write_phy_intf_select(struct s32_priv_data *gmac)
>  {
> -	writel(S32_PHY_INTF_SEL_RGMII, gmac->ctrl_sts);
> +	if (gmac->ctrl_sts)
> +		writel(S32_PHY_INTF_SEL_RGMII, gmac->ctrl_sts);
> +	else
> +		regmap_write(gmac->sts_regmap, gmac->sts_offset, PHY_INTF_SEL_RGMII);
>
>  	dev_dbg(gmac->dev, "PHY mode set to %s\n", phy_modes(*gmac->intf_mode));
>
> @@ -125,10 +132,16 @@ static int s32_dwmac_probe(struct platform_device *pdev)
>  				     "dt configuration failed\n");
>
>  	/* PHY interface mode control reg */
> -	gmac->ctrl_sts = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
> -	if (IS_ERR(gmac->ctrl_sts))
> -		return dev_err_probe(dev, PTR_ERR(gmac->ctrl_sts),
> -				     "S32CC config region is missing\n");
> +	gmac->sts_regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node,
> +					"phy-sel", 1, &gmac->sts_offset);
> +	if (gmac->sts_regmap == ERR_PTR(-EPROBE_DEFER))
> +		return PTR_ERR(gmac->sts_regmap);
> +	if (IS_ERR(gmac->sts_regmap)) {
> +		gmac->ctrl_sts = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
> +		if (IS_ERR(gmac->ctrl_sts))
> +			return dev_err_probe(dev, PTR_ERR(gmac->ctrl_sts),
> +					     "S32CC config region is missing\n");
> +	}
>
>  	/* tx clock */
>  	gmac->tx_clk = devm_clk_get(&pdev->dev, "tx");
> --
> 2.51.0
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ