| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <176457349023.2265004.4610408030407592182.robh@kernel.org> Date: Mon, 01 Dec 2025 01:18:10 -0600 From: "Rob Herring (Arm)" <robh@...nel.org> To: Yulin Lu <luyulin@...incomputing.com> Cc: linmin@...incomputing.com, lianghujun@...incomputing.com, vkoul@...nel.org, p.zabel@...gutronix.de, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, krzk+dt@...nel.org, kishon@...nel.org, conor+dt@...nel.org, Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, zhengyu@...incomputing.com, huangyifeng@...incomputing.com, linux-phy@...ts.infradead.org, neil.armstrong@...aro.org, ningyu@...incomputing.com, fenglin@...incomputing.com Subject: Re: [PATCH v6 1/2] dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY On Mon, 01 Dec 2025 14:10:00 +0800, Yulin Lu wrote: > Document the SATA PHY on the EIC7700 SoC platform, > describing its usage. > > Signed-off-by: Yulin Lu <luyulin@...incomputing.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> > --- > .../bindings/phy/eswin,eic7700-sata-phy.yaml | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251201061000.488-1-luyulin@eswincomputing.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Powered by blists - more mailing lists