linux-kernel - [PATCH v2] Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251202065627.140361-1-yangxingui@huawei.com>
Date: Tue, 2 Dec 2025 14:56:27 +0800
From: Xingui Yang <yangxingui@...wei.com>
To: <john.g.garry@...cle.com>, <yanaijie@...wei.com>, <jejb@...ux.ibm.com>,
	<martin.petersen@...cle.com>
CC: <linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linuxarm@...wei.com>, <liyihang9@...artners.com>, <yangxingui@...wei.com>,
	<liuyonglong@...wei.com>, <kangfenglong@...wei.com>
Subject: [PATCH v2] Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"

This reverts commit ab2068a6fb84751836a84c26ca72b3beb349619d.

When probing the exp-attached sata device, libsas/libata will issue a hard
reset in sas_probe_sata() -> ata_sas_async_probe(), then a broadcast event
will be received after the disk probe fails, and this commit causes the
probe will be re-executed on the disk, and a faulty disk may get into an
indefinite loop of probe.

Therefore, revert this commit, although it can fix some temporary issues
with disk probe failure.

Signed-off-by: Xingui Yang <yangxingui@...wei.com>
Reviewed-by: Jason Yan <yanaijie@...wei.com>
---
Changs to v1:
- Update commit message
---
 drivers/scsi/libsas/sas_internal.h | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 6706f2be8d27..da5408c701cd 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -145,20 +145,6 @@ static inline void sas_fail_probe(struct domain_device *dev, const char *func, i
 		func, dev->parent ? "exp-attached" :
 		"direct-attached",
 		SAS_ADDR(dev->sas_addr), err);
-
-	/*
-	 * If the device probe failed, the expander phy attached address
-	 * needs to be reset so that the phy will not be treated as flutter
-	 * in the next revalidation
-	 */
-	if (dev->parent && !dev_is_expander(dev->dev_type)) {
-		struct sas_phy *phy = dev->phy;
-		struct domain_device *parent = dev->parent;
-		struct ex_phy *ex_phy = &parent->ex_dev.ex_phy[phy->number];
-
-		memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
-	}
-
 	sas_unregister_dev(dev->port, dev);
 }
 
-- 
2.33.0