linux-kernel - [PATCH v3 1/7] spi: dt-bindings: Add data-lanes property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251201-spi-add-multi-bus-support-v3-1-34e05791de83@baylibre.com>
Date: Mon, 01 Dec 2025 20:20:39 -0600
From: David Lechner <dlechner@...libre.com>
To: Mark Brown <broonie@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Marcelo Schmitt <marcelo.schmitt@...log.com>, 
 Michael Hennerich <michael.hennerich@...log.com>, 
 Nuno Sá <nuno.sa@...log.com>, 
 Jonathan Cameron <jic23@...nel.org>, Andy Shevchenko <andy@...nel.org>
Cc: Sean Anderson <sean.anderson@...ux.dev>, linux-spi@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-iio@...r.kernel.org, David Lechner <dlechner@...libre.com>
Subject: [PATCH v3 1/7] spi: dt-bindings: Add data-lanes property

Add a data-lanes property to the spi-peripheral-props binding to
allow specifying the SPI data lane or lanes that a peripheral is
connected to in cases where the SPI controller has more than one
physical SPI data lane.

Signed-off-by: David Lechner <dlechner@...libre.com>
---
v3 changes:
* Renamed spi-buses to data-lanes to reuse existing common property name.
* Added to description to clarify index is peripheral and value is
  controller.
v2 changes:
* Renamed property from spi-buses to spi-data-buses to make it clear
  that we are only talking about the SDI/SDO lines and not the entire
  SPI bus (SCK, CS, etc).
* Fixed prefix order in subject.

This patch has been seen before in a different series from Sean [1].

[1]: https://lore.kernel.org/linux-spi/20250616220054.3968946-2-sean.anderson@linux.dev/

Changes:
* Added maxItems. (8 is the most I've seen so far on an ADC)
* Tweaked the description a bit.
---
 .../devicetree/bindings/spi/spi-peripheral-props.yaml      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 8b6e8fc009dbdc80978f3afef84ddc688ade4348..a2d1b3d82799f6e93e274711eb57f3739eb8f405 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -89,6 +89,20 @@ properties:
     description:
       Delay, in microseconds, after a write transfer.
 
+  data-lanes:
+    description:
+      Array of data lane numbers that describes which SPI data lanes of the
+      controller are connected to the peripheral. The index in the array
+      corresponds to the lane on the peripheral and the value corresponds to
+      the lane on the controller. This only applies to peripherals connected to
+      specialized SPI controllers that have multiple SPI data lanes (a set of
+      independent SDI/SDO lines each with its own serializer) on a single
+      controller.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    default: [0]
+
   stacked-memories:
     description: Several SPI memories can be wired in stacked mode.
       This basically means that either a device features several chip

-- 
2.43.0