| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251203.200526.1986895588669292863.rene@exactco.de>
Date: Wed, 03 Dec 2025 20:05:26 +0100 (CET)
From: René Rebe <rene@...ctco.de>
To: linux-pci@...r.kernel.org
Cc: rafael@...nel.org, mika.westerberg@...ux.intel.com, lukas@...ner.de,
briannorris@...omium.org, helgaas@...nel.org,
linux-kernel@...r.kernel.org, glaubitz@...sik.fu-berlin.de,
riccardo.mottola@...ero.it, mani@...nel.org, mario.limonciello@....com
Subject: [PATCH V2] PCI: Fix PCI bridges not to go to D3Hot on SPARC64
Commit a5fb3ff63287 ("PCI: Allow PCI bridges to go to D3Hot on all
non-x86") was bisected to break some SPARC64 systems, see two oopses
below. Fix by not allowing D3Hot on sparc64 while this is being
further analyzed.
Sun Blade 1000:
ERROR(0): Cheetah error trap taken afsr[0010080005000000] afar[000007f900800000] TL1(0)
ERROR(0): TPC[100a05a4] TNPC[100a05a8] O7[42acc8] TSTATE[4411001603]
ERROR(0):
TPC<MakeIocReady+0xc/0x278 [mptbase]>
ERROR(0): M_SYND(0), E_SYND(0), Privileged
ERROR(0): Highest priority error (0000080000000000) "Bus error response from system bus"
ERROR(0): D-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000]
ERROR(0): D-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000]
ERROR(0): I-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] u[0000000000000000] l[0000000000000000]
ERROR(0): I-cache INSN0[0000000000000000] INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000]
ERROR(0): I-cache INSN4[0000000000000000] INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000]
ERROR(0): E-cache idx[b08040] tag[000000001e008fa0]
ERROR(0): E-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[ffffffffffffffff]
Kernel panic - not syncing: Irrecoverable deferred error trap.
CPU: 0 UID: 0 PID: 46 Comm: (udev-worker) Not tainted 6.14.0-rc1-00001-ga5fb3ff63287 #18
Call Trace:
[<00000000004294b0>] panic+0xf0/0x370
[<0000000000435bc4>] cheetah_deferred_handler+0x2c8/0x2d8
[<0000000000405e88>] c_deferred+0x18/0x24
[<00000000100a05a4>] MakeIocReady+0xc/0x278 [mptbase]
[<00000000100a089c>] mpt_do_ioc_recovery+0x8c/0x1054 [mptbase]
[<000000001009f2d4>] mpt_attach+0x920/0xa68 [mptbase]
[<000000001012424c>] mptsas_probe+0x8/0x3e8 [mptsas]
[<0000000000788308>] local_pci_probe+0x24/0x70
[<0000000000788dac>] pci_device_probe+0x1c0/0x1d0
[<000000000082633c>] really_probe+0x13c/0x29c
[<0000000000826590>] __driver_probe_device+0xf4/0x104
[<0000000000826614>] driver_probe_device+0x24/0xa0
[<000000000082683c>] __driver_attach+0xe8/0x104
[<0000000000824da0>] bus_for_each_dev+0x58/0x84
[<0000000000825508>] bus_add_driver+0xdc/0x1f8
[<0000000000827110>] driver_register+0x70/0x120
Niagara T1:
mptsas 0000:07:00.0: Unable to change power state from D3cold to D0, device inaccessible
NON-RESUMABLE ERROR: Reporting on cpu 31
NON-RESUMABLE ERROR: TPC [0x0000000010184034] <MakeIocReady+0x10/0x298 [mptbase]>
NON-RESUMABLE ERROR: RAW [1f10000000000007:0000000e3179235c:0000000202000004:000000ea00300000
NON-RESUMABLE ERROR: 00000000001f0000:0000000000000000:0000000000000000:0000000000000000]
NON-RESUMABLE ERROR: handle [0x1f10000000000007] stick [0x0000000e3179235c]
NON-RESUMABLE ERROR: type [precise nonresumable]
NON-RESUMABLE ERROR: attrs [0x02000004] < PIO sp-faulted priv >
NON-RESUMABLE ERROR: raddr [0x000000ea00300000]
Kernel panic - not syncing: Non-resumable error.
CPU: 31 UID: 0 PID: 367 Comm: (udev-worker) Not tainted 6.16.12+3-sparc64-smp #1 NONE Debian 6.16.12-2+sparc64.1
Call Trace:
[<00000000004373c4>] dump_stack+0x8/0x18
[<0000000000429540>] panic+0xf4/0x398
[<000000000043afcc>] sun4v_nonresum_error+0x16c/0x240
[<0000000000406eb8>] sun4v_nonres_mondo+0xc8/0xd8
[<0000000010184034>] MakeIocReady+0x10/0x298 [mptbase]
[<00000000101844b4>] mpt_do_ioc_recovery+0x9c/0x1110 [mptbase]
[<00000000101836f8>] mpt_attach+0xb58/0xd20 [mptbase]
[<0000000010287f30>] mptsas_probe+0x10/0x440 [mptsas]
[<0000000000b3fab0>] local_pci_probe+0x30/0x80
[<0000000000b405d4>] pci_device_probe+0xb4/0x240
[<0000000000bfd348>] really_probe+0xc8/0x400
[<0000000000bfd70c>] __driver_probe_device+0x8c/0x160
[<0000000000bfd8c8>] driver_probe_device+0x28/0x100
[<0000000000bfdb7c>] __driver_attach+0xbc/0x1e0
[<0000000000bfacfc>] bus_for_each_dev+0x5c/0xc0
[<0000000000bfcafc>] driver_attach+0x1c/0x40
Press Stop-A (L1-A) from sun keyboard or send break
twice on console to return to the boot prom
Fixes: a5fb3ff63287 ("PCI: Allow PCI bridges to go to D3Hot on all non-x86")
Cc: stable@...nel.org
Signed-off-by: René Rebe <rene@...ctco.de>
---
Tested on Sun Blade 1000 and PowerPC64 G5 w/ T2/Linux.
---
drivers/pci/pci.c | 4 ++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b14dd064006c..7619d2cfa66d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3033,9 +3033,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
/*
* Out of caution, we only allow PCIe ports from 2015 or newer
- * into D3 on x86.
+ * into D3 or x86. Avoid SPARC64 for now, too.
*/
- if (!IS_ENABLED(CONFIG_X86) || dmi_get_bios_year() >= 2015)
+ if ((IS_ENABLED(CONFIG_X86) && dmi_get_bios_year() >= 2015) ||
+ !IS_ENABLED(CONFIG_SPARC64))
return true;
break;
}
--
2.52.0
--
René Rebe, ExactCODE GmbH, Berlin, Germany
https://exactco.de • https://t2linux.com • https://patreon.com/renerebe
Powered by blists - more mailing lists