[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aTDdlibA99YLVSKV@shell.armlinux.org.uk>
Date: Thu, 4 Dec 2025 01:02:14 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Daniel Golle <daniel@...rotopia.org>
Cc: Vladimir Oltean <olteanv@...il.com>, Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Simon Horman <horms@...nel.org>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Frank Wunderlich <frankwu@....de>,
Avinash Jayaraman <ajayaraman@...linear.com>,
Bing tao Xu <bxu@...linear.com>, Liang Xu <lxu@...linear.com>,
Juraj Povazanec <jpovazanec@...linear.com>,
"Fanni (Fang-Yi) Chan" <fchan@...linear.com>,
"Benny (Ying-Tsan) Weng" <yweng@...linear.com>,
"Livia M. Rosu" <lrosu@...linear.com>,
John Crispin <john@...ozen.org>
Subject: Re: [PATCH RFC net-next 0/3] net: dsa: initial support for MaxLinear
MxL862xx switches
On Wed, Dec 03, 2025 at 11:23:11PM +0000, Daniel Golle wrote:
> On Wed, Dec 03, 2025 at 10:26:05PM +0200, Vladimir Oltean wrote:
> > Hi Daniel,
> >
> > On Tue, Dec 02, 2025 at 11:37:13PM +0000, Daniel Golle wrote:
> > > Hi,
> > >
> > > This series adds very basic DSA support for the MaxLinear MxL86252
> > > (5 PHY ports) and MxL86282 (8 PHY ports) switches. The intent is to
> > > validate and get feedback on the overall approach and driver structure,
> > > especially the firmware-mediated host interface.
> > >
> > > MxL862xx integrates a firmware running on an embedded processor (Zephyr
> > > RTOS). Host interaction uses a simple API transported over MDIO/MMD.
> > > This series includes only what's needed to pass traffic between user
> > > ports and the CPU port: relayed MDIO to internal PHYs, basic port
> > > enable/disable, and CPU-port special tagging.
> > >
> > > Thanks for taking a look.
> >
> > I see no phylink_mac_ops in your patches.
>
As you didn't respond to Vladimir's statement here, I will also echo
this. Why do you have no phylink_mac_ops ?
New DSA drivers are expected to always have phylink_mac_ops, and not
rely on the legacy fallback in net/dsa/port.c
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists