| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251204-add-ad9211-v2-2-a1561f977ee5@vaisala.com>
Date: Thu, 04 Dec 2025 08:01:04 +0000
From: Tomas Melin <tomas.melin@...sala.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Nuno Sa <nuno.sa@...log.com>, Jonathan Cameron <jic23@...nel.org>,
David Lechner <dlechner@...libre.com>, Andy Shevchenko <andy@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Michael Hennerich <michael.hennerich@...log.com>,
linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Tomas Melin <tomas.melin@...sala.com>
Subject: [PATCH v2 2/2] iio: adc: ad9467: add support for ad9211
The AD9211 is a 10-bit monolithic sampling analog-to-digital
converter optimized for high performance, low power, and ease
of use. The product operates at up to a 300 MSPS conversion
rate and is optimized for outstanding dynamic performance
in wideband carrier and broadband systems.
The scale table implemented here is not an exact match with the
datasheet as the table presented there is missing some information.
The reference presents these values as being linear,
but that does not add up. There is information missing in the table.
Implemented scale table matches values at the middle and at the ends,
smoothing the curve towards middle and end.
Impact on end result from deviation in scale factor affects only software
using it for scaling. All the possible hw-settings are also available with
this implementation.
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9211.pdf
Signed-off-by: Tomas Melin <tomas.melin@...sala.com>
---
drivers/iio/adc/ad9467.c | 43 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
index f7a9f46ea0dc405e25f312197df4b2131871b4bc..b2a9ddf06c0d207e82361e2de322e74f85e4c504 100644
--- a/drivers/iio/adc/ad9467.c
+++ b/drivers/iio/adc/ad9467.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
+#include <linux/units.h>
#include <linux/iio/backend.h>
@@ -81,6 +82,14 @@
/* AN877_ADC_REG_OUTPUT_DELAY */
#define AN877_ADC_DCO_DELAY_ENABLE 0x80
+/*
+ * Analog Devices AD9211 10-Bit, 200/250/300 MSPS ADC
+ */
+
+#define CHIPID_AD9211 0x06
+#define AD9211_DEF_OUTPUT_MODE 0x00
+#define AD9211_REG_VREF_MASK GENMASK(4, 0)
+
/*
* Analog Devices AD9265 16-Bit, 125/105/80 MSPS ADC
*/
@@ -234,6 +243,17 @@ static int ad9467_reg_access(struct iio_dev *indio_dev, unsigned int reg,
return 0;
}
+static const unsigned int ad9211_scale_table[][2] = {
+ {980, 0x10}, {1000, 0x11}, {1020, 0x12}, {1040, 0x13},
+ {1060, 0x14}, {1080, 0x15}, {1100, 0x16}, {1120, 0x17},
+ {1140, 0x18}, {1160, 0x19}, {1180, 0x1A}, {1190, 0x1B},
+ {1200, 0x1C}, {1210, 0x1D}, {1220, 0x1E}, {1230, 0x1F},
+ {1250, 0x0}, {1270, 0x1}, {1290, 0x2}, {1310, 0x3},
+ {1330, 0x4}, {1350, 0x5}, {1370, 0x6}, {1390, 0x7},
+ {1410, 0x8}, {1430, 0x9}, {1450, 0xA}, {1460, 0xB},
+ {1470, 0xC}, {1480, 0xD}, {1490, 0xE}, {1500, 0xF},
+};
+
static const unsigned int ad9265_scale_table[][2] = {
{1250, 0x00}, {1500, 0x40}, {1750, 0x80}, {2000, 0xC0},
};
@@ -297,6 +317,10 @@ static void __ad9467_get_scale(struct ad9467_state *st, int index,
}, \
}
+static const struct iio_chan_spec ad9211_channels[] = {
+ AD9467_CHAN(0, BIT(IIO_CHAN_INFO_SCALE), 0, 10, 's'),
+};
+
static const struct iio_chan_spec ad9434_channels[] = {
AD9467_CHAN(0, BIT(IIO_CHAN_INFO_SCALE), 0, 12, 's'),
};
@@ -369,6 +393,23 @@ static const struct ad9467_chip_info ad9434_chip_tbl = {
.num_lanes = 6,
};
+static const struct ad9467_chip_info ad9211_chip_tbl = {
+ .name = "ad9211",
+ .id = CHIPID_AD9211,
+ .max_rate = 300 * HZ_PER_MHZ,
+ .scale_table = ad9211_scale_table,
+ .num_scales = ARRAY_SIZE(ad9211_scale_table),
+ .channels = ad9211_channels,
+ .num_channels = ARRAY_SIZE(ad9211_channels),
+ .test_points = AD9647_MAX_TEST_POINTS,
+ .test_mask = GENMASK(AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE,
+ AN877_ADC_TESTMODE_OFF),
+ .test_mask_len = AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE + 1,
+ .default_output_mode = AD9211_DEF_OUTPUT_MODE,
+ .vref_mask = AD9211_REG_VREF_MASK,
+ .has_dco = true,
+};
+
static const struct ad9467_chip_info ad9265_chip_tbl = {
.name = "ad9265",
.id = CHIPID_AD9265,
@@ -1264,6 +1305,7 @@ static int ad9467_probe(struct spi_device *spi)
}
static const struct of_device_id ad9467_of_match[] = {
+ { .compatible = "adi,ad9211", .data = &ad9211_chip_tbl, },
{ .compatible = "adi,ad9265", .data = &ad9265_chip_tbl, },
{ .compatible = "adi,ad9434", .data = &ad9434_chip_tbl, },
{ .compatible = "adi,ad9467", .data = &ad9467_chip_tbl, },
@@ -1275,6 +1317,7 @@ static const struct of_device_id ad9467_of_match[] = {
MODULE_DEVICE_TABLE(of, ad9467_of_match);
static const struct spi_device_id ad9467_ids[] = {
+ { "ad9211", (kernel_ulong_t)&ad9211_chip_tbl },
{ "ad9265", (kernel_ulong_t)&ad9265_chip_tbl },
{ "ad9434", (kernel_ulong_t)&ad9434_chip_tbl },
{ "ad9467", (kernel_ulong_t)&ad9467_chip_tbl },
--
2.47.3
Powered by blists - more mailing lists