linux-kernel - Re: [PATCH v3] arm64: dts: qcom: x1e80100: Add crypto engine

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <08284b5f-a6b4-42f7-95f5-28161ddcd356@oss.qualcomm.com>
Date: Thu, 4 Dec 2025 14:44:13 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Harshal Dev <harshal.dev@....qualcomm.com>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Val Packett <val@...kett.cool>,
        Stephan Gerhold <stephan.gerhold@...aro.org>,
        Abel Vesa <abel.vesa@...aro.org>,
        Udit Tiwari <quic_utiwari@...cinc.com>,
        Neeraj Soni <quic_neersoni@...cinc.com>
Subject: Re: [PATCH v3] arm64: dts: qcom: x1e80100: Add crypto engine

On 11/27/25 10:43 AM, Harshal Dev wrote:
> On X Elite, there is a crypto engine IP block similar to ones found on
> SM8x50 platforms.
> 
> Describe the crypto engine and its BAM.
> 
> Signed-off-by: Harshal Dev <harshal.dev@....qualcomm.com>
> ---
> The dt-binding schema update for the x1e80100 compatible is here
> (already merged):
> 
> https://lore.kernel.org/all/20250213-dt-bindings-qcom-qce-x1e80100-v1-1-d17ef73a1c12@linaro.org/
> ---
> Changes in v3:
> - Fixed num-channels and qcom,num-ees properties by updating them to 20 and 4 respectively.
> - Link to v2: https://lore.kernel.org/all/20250221-x1e80100-crypto-v2-1-413ecf68dcd7@linaro.org
> Changes in v2:
> - Added EE and channels numbers in BAM node, like Stephan suggested.
> - Added v1.7.4 compatible as well.
> - Link to v1: https://lore.kernel.org/r/20250213-x1e80100-crypto-v1-1-f93afdd4025a@linaro.org
> ---
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index 51576d9c935d..a1cadcce98e1 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -3033,6 +3033,30 @@ usb_1_ss2_qmpphy_dp_in: endpoint {
>  			};
>  		};
>  
> +		cryptobam: dma-controller@...4000 {
> +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> +			reg = <0x0 0x01dc4000 0x0 0x28000>;
> +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			iommus = <&apps_smmu 0x480 0x0000>,
> +				 <&apps_smmu 0x481 0x0000>;

Just 0x0 is good

> +			qcom,ee = <0>;
> +			qcom,controlled-remotely;
> +			num-channels = <20>;
> +			qcom,num-ees = <4>;
> +		};
> +
> +		crypto: crypto@...a000 {
> +			compatible = "qcom,x1e80100-qce", "qcom,sm8150-qce", "qcom,qce";
> +			reg = <0x0 0x01dfa000 0x0 0x6000>;
> +			dmas = <&cryptobam 4>, <&cryptobam 5>;
> +			dma-names = "rx", "tx";

one a line, please

> +			iommus = <&apps_smmu 0x480 0x0000>,
> +				 <&apps_smmu 0x481 0x0000>;
> +			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;

0 -> QCOM_ICC_TAG_ALWAYS

Konrad