linux-kernel - [PATCH v3 3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add placeholders and sort

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251205-slpi-v3-3-a1320a074345@gmail.com>
Date: Fri, 05 Dec 2025 22:59:01 +0900
From: Robert Eckelmann via B4 Relay <devnull+longnoserob.gmail.com@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 phone-devel@...r.kernel.org, linux-kernel@...r.kernel.org, david@...t.cz, 
 Robert Eckelmann <longnoserob@...il.com>
Subject: [PATCH v3 3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add
 placeholders and sort

From: Robert Eckelmann <longnoserob@...il.com>

We know these devices are present, most of them are supported by
downstream and close to the mainline kernels.

This is very handy when rebasing the integration tree with the support.

No functional changes.

Reviewed-by: David Heidelberg <david@...t.cz>
Signed-off-by: Robert Eckelmann <longnoserob@...il.com>
---
 .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi   | 29 ++++++++++++++++------
 1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index ab450d44b3f6..3444908b4a6b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -227,6 +227,12 @@ vreg_l26a_1p2: ldo26 {
 	};
 };
 
+&cci_i2c0 {
+	status = "okay";
+
+	/* IMX363 @ 10 */
+};
+
 &cdsp_pas {
 	status = "okay";
 	firmware-name = "qcom/sdm845/Xiaomi/beryllium/cdsp.mbn";
@@ -261,6 +267,22 @@ &ibb {
 	qcom,discharge-resistor-kohms = <300>;
 };
 
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
+
+	status = "okay";
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* TAS2559 @ 4C */
+};
+
 &lab {
 	regulator-min-microvolt = <4600000>;
 	regulator-max-microvolt = <6000000>;
@@ -312,13 +334,6 @@ &mss_pil {
 	"qcom/sdm845/Xiaomi/beryllium/modem.mbn";
 };
 
-&ipa {
-	qcom,gsi-loader = "self";
-	memory-region = <&ipa_fw_mem>;
-	firmware-name = "qcom/sdm845/Xiaomi/beryllium/ipa_fws.mbn";
-	status = "okay";
-};
-
 &pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";

-- 
2.52.0