[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251205144058.1918-1-antoniu.miclaus@analog.com>
Date: Fri, 5 Dec 2025 16:40:39 +0200
From: Antoniu Miclaus <antoniu.miclaus@...log.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich
<Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>,
"David
Lechner" <dlechner@...libre.com>,
Nuno Sá
<nuno.sa@...log.com>,
Andy Shevchenko <andy@...nel.org>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>,
Antoniu Miclaus <antoniu.miclaus@...log.com>,
<linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v6 0/2] iio: amplifiers: add support for ADL8113 Low Noise Amplifier
This patch series adds support for the Analog Devices ADL8113, a 10MHz to 12GHz
Low Noise Amplifier with integrated bypass switches.
The ADL8113 provides four operation modes controlled by two GPIO pins:
- Internal Amplifier (14dB gain)
- Internal Bypass (-2dB insertion loss)
- External Bypass A (configurable gain) - Signal routes from RFIN to OUT_A and from IN_A to RFOUT
- External Bypass B (configurable gain) - Signal routes from RFIN to OUT_B and from IN_B to RFOUT
The driver allows selecting between these paths via the IIO hardwaregain attribute,
with optional external amplifier gains configured through device tree properties.
Antoniu Miclaus (2):
dt-bindings: iio: amplifiers: add adl8113
iio: amplifiers: adl8113: add driver support
.../bindings/iio/amplifiers/adi,adl8113.yaml | 87 ++++++
drivers/iio/amplifiers/Kconfig | 12 +
drivers/iio/amplifiers/Makefile | 1 +
drivers/iio/amplifiers/adl8113.c | 290 ++++++++++++++++++
4 files changed, 390 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml
create mode 100644 drivers/iio/amplifiers/adl8113.c
--
2.43.0
Powered by blists - more mailing lists