linux-kernel - [PATCH 06/12] arm64: dts: mediatek: mt8390-genio-common: Enable HDMI output

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251209-mtk-genio-evk-hdmi-support-v1-6-9a6106effba6@collabora.com>
Date: Tue, 09 Dec 2025 17:34:36 +0100
From: Louis-Alexis Eyraud <louisalexis.eyraud@...labora.com>
To: Chunfeng Yun <chunfeng.yun@...iatek.com>, Vinod Koul <vkoul@...nel.org>, 
 Neil Armstrong <neil.armstrong@...aro.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Matthias Brugger <matthias.bgg@...il.com>, 
 AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, 
 Chun-Kuang Hu <chunkuang.hu@...nel.org>, 
 Philipp Zabel <p.zabel@...gutronix.de>, 
 Guillaume Ranquet <granquet@...libre.com>
Cc: kernel@...labora.com, Krzysztof Kozlowski <krzk@...nel.org>, 
 linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org, 
 linux-phy@...ts.infradead.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, 
 Louis-Alexis Eyraud <louisalexis.eyraud@...labora.com>
Subject: [PATCH 06/12] arm64: dts: mediatek: mt8390-genio-common: Enable
 HDMI output

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>

Add a node for the HDMI-A connector found on this board, then
configure the display pipeline and enable the required DPI1
interface, HDMI controller, its integrated DDC and the HDMI
PHY to enable support for the HDMI output provided by these EVKs.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
[Louis-Alexis Eyraud: reworded subject and description]
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@...labora.com>
---
 .../boot/dts/mediatek/mt8390-genio-common.dtsi     | 141 +++++++++++++++++++++
 1 file changed, 141 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
index a2cdecd2b9034e2f295d817e846d6ed1845e686a..5fa1f5fbad18f2bf9b153ae9a029829641e43023 100644
--- a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
@@ -55,6 +55,20 @@ dmic_codec: dmic-codec {
 		wakeup-delay-ms = <30>;
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		ddc-i2c-bus = <&hdmi_ddc>;
+		hdmi-pwr-supply = <&hdmi_phy>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
@@ -328,6 +342,18 @@ &dither0_out {
 	remote-endpoint = <&dsi0_in>;
 };
 
+&dpi1 {
+	status = "okay";
+};
+
+&dpi1_in {
+	remote-endpoint = <&merge5_out>;
+};
+
+&dpi1_out {
+	remote-endpoint = <&hdmi0_in>;
+};
+
 &gamma0_out {
 	remote-endpoint = <&postmask0_in>;
 };
@@ -337,6 +363,55 @@ &gpu {
 	status = "okay";
 };
 
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+	status = "okay";
+};
+
+&hdmi0_in {
+	remote-endpoint = <&dpi1_out>;
+};
+
+&hdmi0_out {
+	remote-endpoint = <&hdmi_connector_in>;
+};
+
+&hdmi_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_vreg_pins>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -475,6 +550,35 @@ &i2c6 {
 	status = "okay";
 };
 
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dpi1_in>;
+			};
+		};
+	};
+};
+
 &mfg0 {
 	domain-supply = <&mt6359_vproc2_buck_reg>;
 };
@@ -727,6 +831,31 @@ pins-txd {
 		};
 	};
 
+	hdmi_vreg_pins: hdmi-vreg-pins {
+		pins-pwr {
+			pinmux = <PINMUX_GPIO50__FUNC_O_HDMITX20_PWR5V>;
+			bias-disable;
+		};
+	};
+
+	hdmi_pins: hdmi-pins {
+		pins-hotplug {
+			pinmux = <PINMUX_GPIO51__FUNC_I0_HDMITX20_HTPLG>;
+			bias-pull-down;
+		};
+
+		pins-cec {
+			pinmux = <PINMUX_GPIO52__FUNC_B1_HDMITX20_CEC>;
+			bias-disable;
+		};
+
+		pins-ddc {
+			pinmux = <PINMUX_GPIO53__FUNC_B1_HDMITX20_SCL>,
+				 <PINMUX_GPIO54__FUNC_B1_HDMITX20_SDA>;
+			drive-strength = <10>;
+		};
+	};
+
 	i2c0_pins: i2c0-pins {
 		pins {
 			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
@@ -1286,6 +1415,18 @@ connector {
 	};
 };
 
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
 &xhci0 {
 	status = "okay";
 };

-- 
2.52.0