[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251210014136.2549405-3-sw.prabhu6@gmail.com>
Date: Wed, 10 Dec 2025 01:41:36 +0000
From: sw.prabhu6@...il.com
To: James.Bottomley@...senPartnership.com,
martin.petersen@...cle.com,
linux-scsi@...r.kernel.org
Cc: bvanassche@....org,
linux-kernel@...r.kernel.org,
mcgrof@...nel.org,
kernel@...kajraghav.com,
dlemoal@...nel.org,
Swarna Prabhu <sw.prabhu6@...il.com>,
stable@...r.kernel.org,
Swarna Prabhu <s.prabhu@...sung.com>,
Pankaj Raghav <p.raghav@...sung.com>
Subject: [PATCH 1/2] scsi: sd: fix write_same(16/10) to enable sector size > PAGE_SIZE
From: Swarna Prabhu <sw.prabhu6@...il.com>
The WRITE SAME(16) and WRITE SAME(10) scsi commands uses
a page from a dedicated mempool('sd_page_pool') for its
payload. This pool was initialized to allocate single
pages, which was sufficient as long as the device sector
size did not exceed the PAGE_SIZE.
Given that block layer now supports block size upto
64K ie beyond PAGE_SIZE, adapt sd_set_special_bvec()
to accommodate that.
With the above fix, enable sector sizes > PAGE_SIZE in
scsi sd driver.
Cc: stable@...r.kernel.org
Signed-off-by: Swarna Prabhu <s.prabhu@...sung.com>
Co-developed-by: Pankaj Raghav <p.raghav@...sung.com>
Signed-off-by: Pankaj Raghav <p.raghav@...sung.com>
---
Note: We are allocating pages of order aligned to
BLK_MAX_BLOCK_SIZE for the mempool page allocator
'sd_page_pool' all the time. This is because we only
know that a bigger sector size device is attached at
sd_probe and it might be too late to reallocate mempool
with order >0.
drivers/scsi/sd.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0252d3f6bed1..17b5c1589eb2 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -892,14 +892,24 @@ static void sd_config_discard(struct scsi_disk *sdkp, struct queue_limits *lim,
(logical_block_size >> SECTOR_SHIFT);
}
-static void *sd_set_special_bvec(struct request *rq, unsigned int data_len)
+static void *sd_set_special_bvec(struct scsi_cmnd *cmd, unsigned int data_len)
{
struct page *page;
+ struct request *rq = scsi_cmd_to_rq(cmd);
+ struct scsi_device *sdp = cmd->device;
+ unsigned sector_size = sdp->sector_size;
+ unsigned int nr_pages = DIV_ROUND_UP(sector_size, PAGE_SIZE);
+ int n = 0;
page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
if (!page)
return NULL;
- clear_highpage(page);
+
+ do {
+ clear_highpage(page + n);
+ n++;
+ } while (n < nr_pages);
+
bvec_set_page(&rq->special_vec, page, data_len, 0);
rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
return bvec_virt(&rq->special_vec);
@@ -915,7 +925,7 @@ static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
unsigned int data_len = 24;
char *buf;
- buf = sd_set_special_bvec(rq, data_len);
+ buf = sd_set_special_bvec(cmd, data_len);
if (!buf)
return BLK_STS_RESOURCE;
@@ -1004,7 +1014,7 @@ static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
u32 data_len = sdp->sector_size;
- if (!sd_set_special_bvec(rq, data_len))
+ if (!sd_set_special_bvec(cmd, data_len))
return BLK_STS_RESOURCE;
cmd->cmd_len = 16;
@@ -1031,7 +1041,7 @@ static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
u32 data_len = sdp->sector_size;
- if (!sd_set_special_bvec(rq, data_len))
+ if (!sd_set_special_bvec(cmd, data_len))
return BLK_STS_RESOURCE;
cmd->cmd_len = 10;
@@ -2880,10 +2890,7 @@ sd_read_capacity(struct scsi_disk *sdkp, struct queue_limits *lim,
"assuming 512.\n");
}
- if (sector_size != 512 &&
- sector_size != 1024 &&
- sector_size != 2048 &&
- sector_size != 4096) {
+ if (blk_validate_block_size(sector_size)) {
sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
sector_size);
/*
@@ -4368,7 +4375,7 @@ static int __init init_sd(void)
if (err)
goto err_out;
- sd_page_pool = mempool_create_page_pool(SD_MEMPOOL_SIZE, 0);
+ sd_page_pool = mempool_create_page_pool(SD_MEMPOOL_SIZE, get_order(BLK_MAX_BLOCK_SIZE));
if (!sd_page_pool) {
printk(KERN_ERR "sd: can't init discard page pool\n");
err = -ENOMEM;
--
2.51.0
Powered by blists - more mailing lists