linux-kernel - [PATCH RFC 3/4] arm64: dts: s32: set Ethernet channel irqs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251214-dwmac_multi_irq-v1-3-36562ab0e9f7@oss.nxp.com>
Date: Sun, 14 Dec 2025 23:15:39 +0100
From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@...nel.org>
To: Andrew Lunn <andrew+netdev@...n.ch>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Maxime Coquelin <mcoquelin.stm32@...il.com>, 
 Alexandre Torgue <alexandre.torgue@...s.st.com>, 
 Chester Lin <chester62515@...il.com>, Matthias Brugger <mbrugger@...e.com>, 
 Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>, 
 NXP S32 Linux Team <s32@....com>, Shawn Guo <shawnguo@...nel.org>, 
 Sascha Hauer <s.hauer@...gutronix.de>, 
 Pengutronix Kernel Team <kernel@...gutronix.de>, 
 Fabio Estevam <festevam@...il.com>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com, 
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, 
 imx@...ts.linux.dev, devicetree@...r.kernel.org, 
 "Jan Petrous (OSS)" <jan.petrous@....nxp.com>
Subject: [PATCH RFC 3/4] arm64: dts: s32: set Ethernet channel irqs

From: "Jan Petrous (OSS)" <jan.petrous@....nxp.com>

The GMAC Ethernet controller found on S32G2/S32G3 and S32R45
contains up to 5 RX and 5 TX channels.
It can operate in two interrupt modes:

  1) Sharing irq mode: only one irq line is used
     for all channels.

  2) Multiple irq mode: every channel uses two irq lines,
     one for RX and second for TX.

Specify all irq twins for all channels.

Signed-off-by: Jan Petrous (OSS) <jan.petrous@....nxp.com>
---
 arch/arm64/boot/dts/freescale/s32g2.dtsi | 24 ++++++++++++++++++++++--
 arch/arm64/boot/dts/freescale/s32g3.dtsi | 24 ++++++++++++++++++++++--
 2 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 51d00dac12de..ea615fc5ccd9 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -732,8 +732,28 @@ gmac0: ethernet@...3c000 {
 			reg = <0x4033c000 0x2000>, /* gmac IP */
 			      <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 0: tx, rx */
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 1: tx, rx */
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 2: tx, rx */
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 3: tx, rx */
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 4: tx, rx */
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq",
+					  "tx-queue-0", "rx-queue-0",
+					  "tx-queue-1", "rx-queue-1",
+					  "tx-queue-2", "rx-queue-2",
+					  "tx-queue-3", "rx-queue-3",
+					  "tx-queue-4", "rx-queue-4";
 			snps,mtl-rx-config = <&mtl_rx_setup>;
 			snps,mtl-tx-config = <&mtl_tx_setup>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index eff7673e7f34..ecbec49c7344 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -809,8 +809,28 @@ gmac0: ethernet@...3c000 {
 			reg = <0x4033c000 0x2000>, /* gmac IP */
 			      <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 0: tx, rx */
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 1: tx, rx */
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 2: tx, rx */
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 3: tx, rx */
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 4: tx, rx */
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq",
+					  "tx-queue-0", "rx-queue-0",
+					  "tx-queue-1", "rx-queue-1",
+					  "tx-queue-2", "rx-queue-2",
+					  "tx-queue-3", "rx-queue-3",
+					  "tx-queue-4", "rx-queue-4";
 			snps,mtl-rx-config = <&mtl_rx_setup>;
 			snps,mtl-tx-config = <&mtl_tx_setup>;
 			status = "disabled";

-- 
2.47.0