[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+HBbNGdd-u=4PtXZtirqRkFBhKwraa5gV-32QChDDjfVARPRg@mail.gmail.com>
Date: Mon, 15 Dec 2025 12:36:25 +0100
From: Robert Marko <robert.marko@...tura.hr>
To: Conor Dooley <conor@...nel.org>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
gregkh@...uxfoundation.org, nicolas.ferre@...rochip.com,
claudiu.beznea@...on.dev, mturquette@...libre.com, sboyd@...nel.org,
richardcochran@...il.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
daniel.machon@...rochip.com, UNGLinuxDriver@...rochip.com,
luka.perkov@...tura.hr
Subject: Re: [PATCH 4/4] arm64: dts: microchip: add LAN969x support
On Wed, Dec 3, 2025 at 8:21 PM Conor Dooley <conor@...nel.org> wrote:
>
> On Wed, Dec 03, 2025 at 01:21:32PM +0100, Robert Marko wrote:
> > Add support for Microchip LAN969x switch SoC, including the EV23X71A
> > EVB board.
> >
> > Signed-off-by: Robert Marko <robert.marko@...tura.hr>
> > ---
> > arch/arm64/boot/dts/microchip/Makefile | 2 +
> > .../boot/dts/microchip/lan9696-ev23x71a.dts | 761 ++++++++++++++++++
>
> > arch/arm64/boot/dts/microchip/lan969x.dtsi | 482 +++++++++++
>
> The majority of devices in this file are missing soc-specific
> compatibles.
Hi,
I missed this before.
The majority of the devices are simply reused from the AT91 series, so
I thought it was not required to
update all of the bindings to add the LAN9691 compatible.
If that is required, I will do so in v2.
Regards,
Robert
--
Robert Marko
Staff Embedded Linux Engineer
Sartura d.d.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@...tura.hr
Web: www.sartura.hr
Powered by blists - more mailing lists