linux-kernel - Re: [PATCH v7 3/5] arm64: dts: qcom: monaco: Add camera MCLK pinctrl

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87815e05-737a-4051-b139-499f388cc144@linaro.org>
Date: Tue, 16 Dec 2025 09:21:24 +0200
From: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
To: Nihal Kumar Gupta <quic_nihalkum@...cinc.com>,
 bryan.odonoghue@...aro.org, mchehab@...nel.org, robh@...nel.org,
 krzk+dt@...nel.org, conor+dt@...nel.org, andersson@...nel.org,
 konradybcio@...nel.org, hverkuil-cisco@...all.nl,
 cros-qcom-dts-watchers@...omium.org, catalin.marinas@....com, will@...nel.org
Cc: linux-arm-kernel@...ts.infradead.org, quic_svankada@...cinc.com,
 linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 3/5] arm64: dts: qcom: monaco: Add camera MCLK pinctrl

On 12/16/25 08:22, Nihal Kumar Gupta wrote:
> Define pinctrl definitions to enable camera master clocks on Monaco.
> 
> Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@...cinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@...cinc.com>
> ---
>   arch/arm64/boot/dts/qcom/monaco.dtsi | 21 +++++++++++++++++++++
>   1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
> index 4b2d8a449b00..ace09239d167 100644
> --- a/arch/arm64/boot/dts/qcom/monaco.dtsi
> +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
> @@ -5182,6 +5182,27 @@ tlmm: pinctrl@...0000 {
>   			#interrupt-cells = <2>;
>   			wakeup-parent = <&pdc>;
>   
> +			cam0_default: cam0-default-state {
> +				pins = "gpio67";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam1_default: cam1-default-state {
> +				pins = "gpio68";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam2_default: cam2-default-state {
> +				pins = "gpio69";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
>   			cci0_0_default: cci0-0-default-state {
>   				sda-pins {
>   					pins = "gpio57";

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>

-- 
Best wishes,
Vladimir