linux-kernel - Re: [PATCH v4 0/5] arm64: dts: freescale: add support for the GOcontroll Moduline IV/Mini

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <f1e63d1a-e111-46e0-b615-3780391661d6@gocontroll.com>
Date: Tue, 16 Dec 2025 09:22:28 +0100
From: Maud Spierings <maudspierings@...ontroll.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
 Sascha Hauer <s.hauer@...gutronix.de>,
 Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>,
 Matti Vaittinen <mazziesaccount@...il.com>,
 Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
 Conor Dooley <conor.dooley@...rochip.com>
Subject: Re: [PATCH v4 0/5] arm64: dts: freescale: add support for the
 GOcontroll Moduline IV/Mini

Gentle ping after a month of inactivity.

Kind regards,
Maud

On 11/17/25 16:01, Maud Spierings via B4 Relay wrote:
> Add initial support for the Moduline IV and Moduline Mini embedded
> controllers.
> 
> These systems are powered by the Ka-Ro Electronics tx8m-1610 COM, which
> features an imx8mm SoC.
> 
> Signed-off-by: Maud Spierings <maudspierings@...ontroll.com>
> ---
> Changes in v4:
> - Fix BUCK6 property order
> - Change the BUCK6 min/max voltage to match the dram specs (Lothar)
> - Make it clear that the two systems are based on a SoM in commit
>    message of the dt-bindings (Conor)
> - Drop merged PMIC fix (Matti, Mark)
> - Link to v3: https://lore.kernel.org/r/20251030-mini_iv-v3-0-ef56c4d9f219@gocontroll.com
> 
> Changes in v3:
> - Add patch fixing the pmic driver
> - Use the proper feedback properties for BUCK6
> - Slightly rework the compatibles, acked by conor dropped
> - Add missing CAN interface supplies, remove the leftover comment
> - Add missing vled-supply
> - Add missing ethernet phy interrupt (doesn't work)
> - Fix the cs-gpios properties in all spi interfaces
> - Fix the order of properties in all spi interfaces
> - Remove unused labels for regulators of the PMIC
> - Link to v2: https://lore.kernel.org/r/20251022-mini_iv-v2-0-20af8f9aac14@gocontroll.com
> 
> Changes in v2:
> - Fix allignment issue in imx8mm-tx8m-1610.dtsi (fec1)
> - Move phy-reset into fec (works better in barebox)
> - Make the gpio-line-names groups of four on every line
> - Link to v1: https://lore.kernel.org/r/20251009-mini_iv-v1-0-f3889c492457@gocontroll.com
> 
> ---
> Maud Spierings (5):
>        dt-bindings: arm: fsl: Add GOcontroll Moduline IV/Mini
>        arm64: dts: imx8mm: Add pinctrl config definitions
>        arm64: dts: freescale: add Ka-Ro Electronics tx8m-1610 COM
>        arm64: dts: freescale: Add the GOcontroll Moduline IV
>        arm64: dts: freescale: Add the GOcontroll Moduline Mini
> 
>   Documentation/devicetree/bindings/arm/fsl.yaml     |   8 +
>   arch/arm64/boot/dts/freescale/Makefile             |   3 +
>   arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h     |  33 +
>   .../imx8mm-tx8m-1610-moduline-iv-306-d.dts         | 800 +++++++++++++++++++++
>   .../imx8mm-tx8m-1610-moduline-mini-111.dts         | 688 ++++++++++++++++++
>   .../arm64/boot/dts/freescale/imx8mm-tx8m-1610.dtsi | 444 ++++++++++++
>   6 files changed, 1976 insertions(+)
> ---
> base-commit: 7c3ba4249a3604477ea9c077e10089ba7ddcaa03
> change-id: 20251009-mini_iv-a05e5c2c1223
> 
> Best regards,