[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <19bf8b37-4b40-4825-a8be-a94139389c69@oss.qualcomm.com>
Date: Wed, 17 Dec 2025 12:14:15 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Nihal Kumar Gupta <quic_nihalkum@...cinc.com>, bryan.odonoghue@...aro.org,
mchehab@...nel.org, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, andersson@...nel.org, konradybcio@...nel.org,
hverkuil-cisco@...all.nl, cros-qcom-dts-watchers@...omium.org,
catalin.marinas@....com, will@...nel.org
Cc: linux-arm-kernel@...ts.infradead.org, quic_svankada@...cinc.com,
linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 4/5] arm64: dts: qcom: monaco-evk: Add camera AVDD
regulators
On 12/16/25 7:22 AM, Nihal Kumar Gupta wrote:
> Define three fixed regulators for camera AVDD rails, each gpio-controlled
> with corresponding pinctrl definitions.
>
> Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@...cinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@...cinc.com>
> ---
[...]
> &tlmm {
> + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
> + pins = "gpio73";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
All other entries in this scope are sorted wrt the pin index..
Please take care of that and add my
Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Konrad
> +
> + cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state {
> + pins = "gpio74";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + cam2_avdd_2v8_en_default: cam2-avdd-2v8-en-state {
> + pins = "gpio75";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> ethernet0_default: ethernet0-default-state {
> ethernet0_mdc: ethernet0-mdc-pins {
> pins = "gpio5";
Powered by blists - more mailing lists