| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251217-staging-ad4062-v4-1-7890a2951a8f@analog.com>
Date: Wed, 17 Dec 2025 13:13:24 +0100
From: Jorge Marques <jorge.marques@...log.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich
<Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>,
"David
Lechner" <dlechner@...libre.com>,
Nuno Sá
<nuno.sa@...log.com>,
Andy Shevchenko <andy@...nel.org>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>, Jonathan Corbet <corbet@....net>,
Linus Walleij
<linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>
CC: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-gpio@...r.kernel.org>, Jorge Marques <jorge.marques@...log.com>
Subject: [PATCH v4 1/9] dt-bindings: iio: adc: Add adi,ad4062
Add dt-bindings for AD4062 family, devices AD4060/AD4062, low-power with
monitor capabilities SAR ADCs. Each variant of the family differs in
resolution. The device contains two outputs (gp0, gp1). The outputs can
be configured for range of options, such as threshold and data ready.
The device uses a 2-wire I3C interface.
Signed-off-by: Jorge Marques <jorge.marques@...log.com>
---
.../devicetree/bindings/iio/adc/adi,ad4062.yaml | 120 +++++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 126 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
new file mode 100644
index 0000000000000..eeb148081663c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4062.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4062 ADC family device driver
+
+maintainers:
+ - Jorge Marques <jorge.marques@...log.com>
+
+description: |
+ Analog Devices AD4062 Single Channel Precision SAR ADC family
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4060.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4062.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad4060
+ - adi,ad4062
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Two pins are available that can be configured as either a general purpose
+ digital output, device enable signal (used to synchronise other parts of
+ the signal chain with ADC sampling), device ready (GP1 only) or various
+ interrupt signals. If intended for use as a GPIO or device enable, will not
+ present here.
+ minItems: 1
+ items:
+ - description:
+ GP0 pin, cannot be configured as DEV_RDY.
+ - description:
+ GP1 pin, can be configured to any setting.
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: gp0
+ - const: gp1
+
+ gpio-controller:
+ description:
+ Marks the device node as a GPIO controller. GPs not listed as interrupts
+ are exposed as a GPO.
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell is the GPIO number and the second cell specifies
+ GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+ vdd-supply:
+ description: Analog power supply.
+
+ vio-supply:
+ description: Digital interface logic power supply.
+
+ ref-supply:
+ description:
+ Reference voltage to set the ADC full-scale range. If not present,
+ vdd-supply is used as the reference voltage.
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vio-supply
+
+allOf:
+ - $ref: /schemas/i3c/i3c.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i3c {
+ #address-cells = <3>;
+ #size-cells = <0>;
+
+ adc@0,2ee007c0000 {
+ reg = <0x0 0x2ee 0x7c0000>;
+ vdd-supply = <&vdd>;
+ vio-supply = <&vio>;
+ ref-supply = <&ref>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <0 0 IRQ_TYPE_EDGE_RISING>,
+ <0 1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "gp0", "gp1";
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i3c {
+ #address-cells = <3>;
+ #size-cells = <0>;
+
+ adc@0,2ee007c0000 {
+ reg = <0x0 0x2ee 0x7c0000>;
+ vdd-supply = <&vdd>;
+ vio-supply = <&vio>;
+ ref-supply = <&ref>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 29340394ac9d7..bc1d6b2d0a11e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1432,6 +1432,12 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
F: Documentation/iio/ad4030.rst
F: drivers/iio/adc/ad4030.c
+ANALOG DEVICES INC AD4062 DRIVER
+M: Jorge Marques <jorge.marques@...log.com>
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
+
ANALOG DEVICES INC AD4080 DRIVER
M: Antoniu Miclaus <antoniu.miclaus@...log.com>
L: linux-iio@...r.kernel.org
--
2.51.1
Powered by blists - more mailing lists