| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ds2ok7teixvjeips22htvrickr3rmtgdkkbg7bfvgb7zcfxpdf@rapmqpkpsioa>
Date: Thu, 18 Dec 2025 13:46:27 +0900
From: Koichiro Den <den@...inux.co.jp>
To: ntb@...ts.linux.dev
Cc: jdmason@...zu.us, dave.jiang@...el.com, allenbh@...il.com,
Frank.Li@....com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] NTB: ntb_transport: Use seq_file for QP stats debugfs
On Wed, Dec 17, 2025 at 11:18:01PM +0900, Koichiro Den wrote:
> The ./qp*/stats debugfs file for each NTB transport QP is currently
> implemented with a hand-crafted kmalloc() buffer and a series of
> scnprintf() calls. This is a pre-seq_file style pattern and makes future
> extensions easy to truncate.
>
> Convert the stats file to use the seq_file helpers via
> DEFINE_SHOW_ATTRIBUTE(), which simplifies the code and lets the seq_file
> core handle buffering and partial reads.
>
> While touching this area, fix a bug in the per-QP debugfs directory
> naming: the buffer used for "qp%d" was only 4 bytes, which truncates
> names like "qp10" to "qp1" and causes multiple queues to share the same
> directory. Enlarge the buffer and use sizeof() to avoid truncation.
>
> Reviewed-by: Frank Li <Frank.Li@....com>
> Signed-off-by: Koichiro Den <den@...inux.co.jp>
Please disregard this submission.
This patch was re-sent because it initially appeared not to have
successfully reached ML. However, both submissions showed up in the end,
resulting in duplicate postings.
The original submission is here:
https://lore.kernel.org/all/20251217081955.3137163-1-den@valinux.co.jp/
Sorry for the noise.
Koichiro
> ---
> Note: This patch is split out from the following series, where it was
> originally included as a preparatory change (refactor + small fix):
> https://lore.kernel.org/all/aS3xe0CNHeIMUu7P@lizhi-Precision-Tower-5810/
>
> drivers/ntb/ntb_transport.c | 136 +++++++++++-------------------------
> 1 file changed, 41 insertions(+), 95 deletions(-)
>
> diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
> index eb875e3db2e3..d5a544bf8fd6 100644
> --- a/drivers/ntb/ntb_transport.c
> +++ b/drivers/ntb/ntb_transport.c
> @@ -57,6 +57,7 @@
> #include <linux/module.h>
> #include <linux/pci.h>
> #include <linux/slab.h>
> +#include <linux/seq_file.h>
> #include <linux/types.h>
> #include <linux/uaccess.h>
> #include <linux/mutex.h>
> @@ -466,104 +467,49 @@ void ntb_transport_unregister_client(struct ntb_transport_client *drv)
> }
> EXPORT_SYMBOL_GPL(ntb_transport_unregister_client);
>
> -static ssize_t debugfs_read(struct file *filp, char __user *ubuf, size_t count,
> - loff_t *offp)
> +static int ntb_qp_debugfs_stats_show(struct seq_file *s, void *v)
> {
> - struct ntb_transport_qp *qp;
> - char *buf;
> - ssize_t ret, out_offset, out_count;
> -
> - qp = filp->private_data;
> + struct ntb_transport_qp *qp = s->private;
>
> if (!qp || !qp->link_is_up)
> return 0;
>
> - out_count = 1000;
> -
> - buf = kmalloc(out_count, GFP_KERNEL);
> - if (!buf)
> - return -ENOMEM;
> + seq_puts(s, "\nNTB QP stats:\n\n");
> +
> + seq_printf(s, "rx_bytes - \t%llu\n", qp->rx_bytes);
> + seq_printf(s, "rx_pkts - \t%llu\n", qp->rx_pkts);
> + seq_printf(s, "rx_memcpy - \t%llu\n", qp->rx_memcpy);
> + seq_printf(s, "rx_async - \t%llu\n", qp->rx_async);
> + seq_printf(s, "rx_ring_empty - %llu\n", qp->rx_ring_empty);
> + seq_printf(s, "rx_err_no_buf - %llu\n", qp->rx_err_no_buf);
> + seq_printf(s, "rx_err_oflow - \t%llu\n", qp->rx_err_oflow);
> + seq_printf(s, "rx_err_ver - \t%llu\n", qp->rx_err_ver);
> + seq_printf(s, "rx_buff - \t0x%p\n", qp->rx_buff);
> + seq_printf(s, "rx_index - \t%u\n", qp->rx_index);
> + seq_printf(s, "rx_max_entry - \t%u\n", qp->rx_max_entry);
> + seq_printf(s, "rx_alloc_entry - \t%u\n\n", qp->rx_alloc_entry);
> +
> + seq_printf(s, "tx_bytes - \t%llu\n", qp->tx_bytes);
> + seq_printf(s, "tx_pkts - \t%llu\n", qp->tx_pkts);
> + seq_printf(s, "tx_memcpy - \t%llu\n", qp->tx_memcpy);
> + seq_printf(s, "tx_async - \t%llu\n", qp->tx_async);
> + seq_printf(s, "tx_ring_full - \t%llu\n", qp->tx_ring_full);
> + seq_printf(s, "tx_err_no_buf - %llu\n", qp->tx_err_no_buf);
> + seq_printf(s, "tx_mw - \t0x%p\n", qp->tx_mw);
> + seq_printf(s, "tx_index (H) - \t%u\n", qp->tx_index);
> + seq_printf(s, "RRI (T) - \t%u\n", qp->remote_rx_info->entry);
> + seq_printf(s, "tx_max_entry - \t%u\n", qp->tx_max_entry);
> + seq_printf(s, "free tx - \t%u\n", ntb_transport_tx_free_entry(qp));
> + seq_putc(s, '\n');
> +
> + seq_printf(s, "Using TX DMA - \t%s\n", qp->tx_dma_chan ? "Yes" : "No");
> + seq_printf(s, "Using RX DMA - \t%s\n", qp->rx_dma_chan ? "Yes" : "No");
> + seq_printf(s, "QP Link - \t%s\n", qp->link_is_up ? "Up" : "Down");
> + seq_putc(s, '\n');
>
> - out_offset = 0;
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "\nNTB QP stats:\n\n");
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_bytes - \t%llu\n", qp->rx_bytes);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_pkts - \t%llu\n", qp->rx_pkts);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_memcpy - \t%llu\n", qp->rx_memcpy);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_async - \t%llu\n", qp->rx_async);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_ring_empty - %llu\n", qp->rx_ring_empty);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_err_no_buf - %llu\n", qp->rx_err_no_buf);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_err_oflow - \t%llu\n", qp->rx_err_oflow);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_err_ver - \t%llu\n", qp->rx_err_ver);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_buff - \t0x%p\n", qp->rx_buff);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_index - \t%u\n", qp->rx_index);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_max_entry - \t%u\n", qp->rx_max_entry);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "rx_alloc_entry - \t%u\n\n", qp->rx_alloc_entry);
> -
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_bytes - \t%llu\n", qp->tx_bytes);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_pkts - \t%llu\n", qp->tx_pkts);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_memcpy - \t%llu\n", qp->tx_memcpy);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_async - \t%llu\n", qp->tx_async);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_ring_full - \t%llu\n", qp->tx_ring_full);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_err_no_buf - %llu\n", qp->tx_err_no_buf);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_mw - \t0x%p\n", qp->tx_mw);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_index (H) - \t%u\n", qp->tx_index);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "RRI (T) - \t%u\n",
> - qp->remote_rx_info->entry);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "tx_max_entry - \t%u\n", qp->tx_max_entry);
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "free tx - \t%u\n",
> - ntb_transport_tx_free_entry(qp));
> -
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "\n");
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "Using TX DMA - \t%s\n",
> - qp->tx_dma_chan ? "Yes" : "No");
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "Using RX DMA - \t%s\n",
> - qp->rx_dma_chan ? "Yes" : "No");
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "QP Link - \t%s\n",
> - qp->link_is_up ? "Up" : "Down");
> - out_offset += scnprintf(buf + out_offset, out_count - out_offset,
> - "\n");
> -
> - if (out_offset > out_count)
> - out_offset = out_count;
> -
> - ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset);
> - kfree(buf);
> - return ret;
> -}
> -
> -static const struct file_operations ntb_qp_debugfs_stats = {
> - .owner = THIS_MODULE,
> - .open = simple_open,
> - .read = debugfs_read,
> -};
> + return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(ntb_qp_debugfs_stats);
>
> static void ntb_list_add(spinlock_t *lock, struct list_head *entry,
> struct list_head *list)
> @@ -1236,15 +1182,15 @@ static int ntb_transport_init_queue(struct ntb_transport_ctx *nt,
> qp->tx_max_entry = tx_size / qp->tx_max_frame;
>
> if (nt->debugfs_node_dir) {
> - char debugfs_name[4];
> + char debugfs_name[8];
>
> - snprintf(debugfs_name, 4, "qp%d", qp_num);
> + snprintf(debugfs_name, sizeof(debugfs_name), "qp%d", qp_num);
> qp->debugfs_dir = debugfs_create_dir(debugfs_name,
> nt->debugfs_node_dir);
>
> qp->debugfs_stats = debugfs_create_file("stats", S_IRUSR,
> qp->debugfs_dir, qp,
> - &ntb_qp_debugfs_stats);
> + &ntb_qp_debugfs_stats_fops);
> } else {
> qp->debugfs_dir = NULL;
> qp->debugfs_stats = NULL;
> --
> 2.51.0
>
Powered by blists - more mailing lists