[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251219-yv5_revise_dts-v3-2-ca1d5a382013@gmail.com>
Date: Fri, 19 Dec 2025 16:09:55 +0800
From: Kevin Tung <kevin.tung.openbmc@...il.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
Amithash Prasasd <amithash@...a.com>, Kevin Tung <Kevin.Tung@...ntatw.com>,
Ken Chen <Ken.Chen@...ntatw.com>, Leo Yang <Leo-Yang@...ntatw.com>,
Kevin Tung <kevin.tung.openbmc@...il.com>
Subject: [PATCH v3 2/5] ARM: dts: aspeed: yosemite5: Remove ambiguous power
monitor DTS nodes
Two different power monitor devices, using different drivers, reuse
I2C addresses 0x40 and 0x45 on bus 10 across Yosemite5 board variants.
Defining these devices statically in the DTS can lead to incorrect
driver binding on newer boards when the wrong device is instantiated.
Therefore, remove 10-0040 and 10-0045 device nodes, and let the driver
selection is instead handled in user space by the OpenBMC Entity
Manager based on the actual board configuration.
Signed-off-by: Kevin Tung <kevin.tung.openbmc@...il.com>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
index 7991e9360847532cff9aad4ad4ed57d4c30668a0..45b8ac2e8c65a4f672e64571631b7f6944f26213 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -674,20 +674,6 @@ gpio-expander@22 {
"PWRGD_P3V3_AUX","ALERT_TEMP";
};
- power-sensor@40 {
- compatible = "ti,ina233";
- reg = <0x40>;
- shunt-resistor = <2000>;
- ti,maximum-expected-current-microamp = <32768000>;
- };
-
- power-sensor@45 {
- compatible = "ti,ina233";
- reg = <0x45>;
- shunt-resistor = <2000>;
- ti,maximum-expected-current-microamp = <32768000>;
- };
-
adc@48 {
compatible = "ti,ads7830";
reg = <0x48>;
--
2.52.0
Powered by blists - more mailing lists