[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aUYrsUVKmQX7Czy7@debian-BULLSEYE-live-builder-AMD64>
Date: Sat, 20 Dec 2025 01:53:05 -0300
From: Marcelo Schmitt <marcelo.schmitt1@...il.com>
To: Petre Rodan <petre.rodan@...dimension.ro>
Cc: Jonathan Cameron <jic23@...nel.org>,
David Lechner <dlechner@...libre.com>,
Nuno Sá <nuno.sa@...log.com>,
Andy Shevchenko <andy@...nel.org>,
Andreas Klinger <ak@...klinger.de>, linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org,
Jonathan Cameron <Jonathan.Cameron@...wei.com>
Subject: Re: [PATCH 10/14] iio: pressure: mprls0025pa: cleanup pressure
calculation
On 12/18, Petre Rodan wrote:
> A sign change is needed for proper calculation of the pressure.
> The value of the affected element is zero for all official MPR sensors
> covered in the datasheet.
>
> The change will however ensure a correct calculation if a custom chip
> is used (and if honeywell,pmin-pascal != 0 in the device tree overlay).
I don't think this should be relevant to the commit log. Correct calculation
should be supported regardless of what is in firmware.
Was pressure data read buggy before? If so, this patch needs a Fixes tag.
>
> Also due to the fact that raw pressure values can not be lower
> than output_min (400k-3.3M) there is no need to calculate a decimal for
> the offset.
>
> Signed-off-by: Petre Rodan <petre.rodan@...dimension.ro>
> ---
> drivers/iio/pressure/mprls0025pa.c | 26 +++++++++++---------------
> drivers/iio/pressure/mprls0025pa.h | 2 --
> 2 files changed, 11 insertions(+), 17 deletions(-)
Powered by blists - more mailing lists