| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251220-surface-sp11-for-next-v6-0-81f7451edb77@gmail.com>
Date: Sat, 20 Dec 2025 16:26:28 +0100
From: Jérôme de Bretagne via B4 Relay <devnull+jerome.debretagne.gmail.com@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Johannes Berg <johannes@...solutions.net>,
Lorenzo Bianconi <lorenzo@...nel.org>,
Maximilian Luz <luzmaximilian@...il.com>, Hans de Goede <hansg@...nel.org>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Jeff Johnson <jjohnson@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-wireless@...r.kernel.org,
platform-driver-x86@...r.kernel.org, ath12k@...ts.infradead.org,
Jeff Johnson <jeff.johnson@....qualcomm.com>,
Dale Whinham <daleyo@...il.com>,
Jérôme de Bretagne <jerome.debretagne@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@....qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Subject: [PATCH v6 0/4] Microsoft Surface Pro 11 support
This series brings support for the Qualcomm-based Microsoft Surface
Pro 11 covering both the OLED and LCD variants.
Signed-off-by: Dale Whinham <daleyo@...il.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@...il.com>
---
Changes in v6:
- Remove the disable-rfkill property and patches entirely from this patchset [Bryan, Krzysztof]
- Add the R-b: tag from Krzysztof for the denali compatibles
- Link to v5: https://lore.kernel.org/r/20251220-surface-sp11-for-next-v5-0-16065bef8ef3@gmail.com
Changes in v5:
- Move the OLED variant description to keep the logical order [Krzysztof]
- Remove a T-b: tag as not applicable for a binding [Krzysztof]
- Remove another T-b: tag already covered by authorship [Krzysztof]
- Reference disable-rfkill in qcom,ath12k.yaml to fix dtbs_check failure [Krzysztof]
- Remove erroneously copied Copyright lines [Krzysztof]
- Add the R-b: tag from Dmitry for the aggregator_registry patch
- Link to v4: https://lore.kernel.org/r/20251218-surface-sp11-for-next-v4-0-7bcf83c1504a@gmail.com
Changes in v4:
- Re-order the denali entry in the aggregator_registry acpi_match table [Dmitry]
- Improve the bindings by splitting the LCD and OLED variants into 2 entries [Konrad]
- Enable i2c4 to make it accessible through i2c-tools [Konrad]
- Document the addresses for i2c0 and i2c4 like in romulus.dtsi [Konrad]
- Fix the clock-frequency for i2c0 based on DSDT/SSDT
- Drop i2c5 which is not found in the DSDT after double-checking
- Add the R-b: tag from Konrad for the SP11 device trees
- Link to v3: https://lore.kernel.org/r/20251218-surface-sp11-for-next-v3-0-875afc7bd3b7@gmail.com
Changes in v3:
- Update the compatible strings to document both the OLED and LCD variants
- Move the disable-rfkill property into ieee80211.yaml [Rob,Krzysztof]
- Reference commit c6a7c0b09d5f and detail the disable-rfkill patch description [Rob,Krzysztof]
- Switch to the renamed hamoa.dtsi and hamoa-pmics.dtsi [Dale]
- Improve the comments describing the 2 USB Type-C port location
- Update the speaker definition to describe only 2-speakers [Konrad]
- Drop output-low from the speaker definition [Konrad]
- Enable i2c0 to make it accessible through i2c-tools [Konrad]
- Delete a non-applicable comment about removable WLAN card [Konrad]
- Re-order a few nodes and fix indentation issues [Konrad]
- Squash one of the patches as suggested [Krzysztof]
- Drop the NAKed patch patch about a dpcd link rate quirk [Dmitry]
- Include the Reviewed-by: tags
- Link to v2: https://lore.kernel.org/all/20251201011457.17422-1-daleyo@gmail.com/
Changes in v2:
- Dropped ATNA30DW01 patch as it was merged.
- Split device tree into x1e (OLED)/x1p (LCD) specific *.dts files and move common code into x1-microsoft-denali.dtsi (patch 4).
- Device tree now enables higher external monitor refresh rates/resolutions (patch 4).
- Device tree now enables partially working audio output; requires alsa-ucm-conf and audioreach-topology definitions in userspace (patch 4).
- Replaced 'Work around bogus maximum link rate' with a quirk-based approach (patch 5).
- Improve the commit message about the disable-rfkill property in response to feedback (patch 6).
---
Dale Whinham (3):
firmware: qcom: scm: allow QSEECOM on Surface Pro 11
platform/surface: aggregator_registry: Add Surface Pro 11 (QCOM)
arm64: dts: qcom: Add support for X1-based Surface Pro 11
Jérôme de Bretagne (1):
dt-bindings: arm: qcom: Document Microsoft Surface Pro 11
Documentation/devicetree/bindings/arm/qcom.yaml | 11 +
arch/arm64/boot/dts/qcom/Makefile | 4 +
arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi | 1322 ++++++++++++++++++++
.../dts/qcom/x1e80100-microsoft-denali-oled.dts | 19 +
.../boot/dts/qcom/x1p64100-microsoft-denali.dts | 15 +
drivers/firmware/qcom/qcom_scm.c | 1 +
.../platform/surface/surface_aggregator_registry.c | 18 +
7 files changed, 1390 insertions(+)
---
base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8
change-id: 20251218-surface-sp11-for-next-626e327f7b33
Best regards,
--
Jérôme de Bretagne <jerome.debretagne@...il.com>
Powered by blists - more mailing lists