| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251223-knp-remoteproc-v3-3-5b09885c55a5@oss.qualcomm.com>
Date: Tue, 23 Dec 2025 01:13:49 -0800
From: Jingyi Wang <jingyi.wang@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>
Cc: aiqun.yu@....qualcomm.com, tingwei.zhang@....qualcomm.com,
trilok.soni@....qualcomm.com, yijie.yang@....qualcomm.com,
linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Jingyi Wang <jingyi.wang@....qualcomm.com>,
Sibi Sankar <sibi.sankar@....qualcomm.com>
Subject: [PATCH v3 3/5] dt-bindings: remoteproc: qcom,pas: Document pas for
SoCCP on Kaanapali and Glymur platforms
Document the component used to boot SoCCP on Kaanapali SoC and add
compatible for Glymur SoCCP which could fallback to Kaanapali. Extend
the "qcom,smem-states", "qcom,smem-state-names", "interrupts" and
"interrupt-names" properties in the pas-common.
Co-developed-by: Sibi Sankar <sibi.sankar@....qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@....qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@....qualcomm.com>
---
.../remoteproc/qcom,kaanapali-soccp-pas.yaml | 134 +++++++++++++++++++++
.../bindings/remoteproc/qcom,pas-common.yaml | 28 +++--
2 files changed, 155 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,kaanapali-soccp-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,kaanapali-soccp-pas.yaml
new file mode 100644
index 000000000000..bd94ab9a3da4
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,kaanapali-soccp-pas.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,kaanapali-soccp-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Kaanapali SoCCP Peripheral Authentication Service
+
+maintainers:
+ - Jingyi Wang <jingyi.wang@....qualcomm.com>
+
+description:
+ The SoC Control Processor (SoCCP) is small RISC-V MCU that controls USB
+ Type-C, battery charging and various other functions on Qualcomm SoCs, somewhat
+ analogous to traditional PC Embedded Controllers. This document describes
+ the Peripheral Authentication Service loads and boots firmware for SoCCP.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,glymur-soccp-pas
+ - const: qcom,kaanapali-soccp-pas
+ - enum:
+ - qcom,kaanapali-soccp-pas
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XO clock
+
+ clock-names:
+ items:
+ - const: xo
+
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MX power domain
+
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mx
+
+ firmware-name:
+ items:
+ - description: Firmware name of the Hexagon core
+ - description: Firmware name of the Hexagon Devicetree
+
+ memory-region:
+ items:
+ - description: Memory region for main Firmware authentication
+ - description: Memory region for Devicetree Firmware authentication
+
+required:
+ - compatible
+ - reg
+ - memory-region
+ - power-domains
+ - power-domain-names
+
+allOf:
+ - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #define IPCC_MPROC_SOCCP
+
+ remoteproc@...000 {
+ compatible = "qcom,kaanapali-soccp-pas";
+ reg = <0x00d00000 0x200000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interrupts-extended = <&intc GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 9 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 10 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "pong",
+ "wake-ack";
+
+ memory-region = <&soccp_mem>,
+ <&soccp_dtb_mem_mem>;
+
+ firmware-name = "qcom/kaanapali/soccp.mbn",
+ "qcom/kaanapali/soccp_dtb.mbn";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MX>;
+ power-domain-names = "cx",
+ "mx";
+
+ qcom,smem-states = <&soccp_smp2p_out 0>,
+ <&soccp_smp2p_out 10>,
+ <&soccp_smp2p_out 9>,
+ <&soccp_smp2p_out 8>;
+ qcom,smem-state-names = "stop",
+ "wakeup",
+ "sleep",
+ "ping";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "soccp";
+ qcom,remote-pid = <19>;
+
+ /* ... */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
index 63a82e7a8bf8..149e993282bb 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
@@ -33,16 +33,22 @@ properties:
- description: Handover interrupt
- description: Stop acknowledge interrupt
- description: Shutdown acknowledge interrupt
+ - description: Pong interrupt
+ - description: Wake acknowledge interrupt
interrupt-names:
minItems: 5
+ maxItems: 7
items:
- - const: wdog
- - const: fatal
- - const: ready
- - const: handover
- - const: stop-ack
- - const: shutdown-ack
+ enum:
+ - wdog
+ - fatal
+ - ready
+ - handover
+ - stop-ack
+ - shutdown-ack
+ - pong
+ - wake-ack
power-domains:
minItems: 1
@@ -55,13 +61,21 @@ properties:
qcom,smem-states:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: States used by the AP to signal the Hexagon core
+ minItems: 1
items:
- - description: Stop the modem
+ - description: Stop the remoteproc
+ - description: Wake up the remoteproc
+ - description: Make the remoteproc sleep
+ - description: Ping the remoteproc
qcom,smem-state-names:
description: The names of the state bits used for SMP2P output
+ minItems: 1
items:
- const: stop
+ - const: wakeup
+ - const: sleep
+ - const: ping
smd-edge:
$ref: /schemas/remoteproc/qcom,smd-edge.yaml#
--
2.25.1
Powered by blists - more mailing lists