linux-kernel - Re: [PATCH 2/5] phy: tegra: xusb: Fix USB2 port regulator disable logic

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <aUuV2ZYKmM_aYgTv@vaman>
Date: Wed, 24 Dec 2025 12:57:21 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Diogo Ivo <diogo.ivo@...nico.ulisboa.pt>,
	Jonathan Hunter <jonathanh@...dia.com>
Cc: Mathias Nyman <mathias.nyman@...el.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Thierry Reding <thierry.reding@...il.com>,
	Jonathan Hunter <jonathanh@...dia.com>, JC Kuo <jckuo@...dia.com>,
	Kishon Vijay Abraham I <kishon@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>, linux-usb@...r.kernel.org,
	linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-phy@...ts.infradead.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 2/5] phy: tegra: xusb: Fix USB2 port regulator disable
 logic

On 04-12-25, 21:27, Diogo Ivo wrote:
> The USB2 PHY mode handling on Tegra210 incorrectly relied on
> regulator_is_enabled() when determining whether the VBUS supply should
> be disabled during role changes. This is because regulator_is_enabled()
> reports exactly what is states and not if there is an unbalanced number
> of calls between regulator_enable() and regulator_disable(). For
> example, regulator_is_enabled() always reports true on a fixed-regulator
> with no enable gpio, which is the case on the Pixel C.
> 
> This then leads to the PHY driver wrongfully calling regulator_disable()
> when transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE since the driver
> did not previously call the corresponding regulator_enable().
> 
> Fix this by keeping track of the current role and updating the logic to
> disable the regulator only when the previous role was USB_ROLE_HOST.
> 
> While at it fix a small typo in a comment.

Never mix a patch with something else please. More imp if it is fix
which will go to rcX. Please send a different patch for typo

> 
> Signed-off-by: Diogo Ivo <diogo.ivo@...nico.ulisboa.pt>
> ---
>  drivers/phy/tegra/xusb-tegra210.c | 5 +++--
>  drivers/phy/tegra/xusb.h          | 1 +
>  2 files changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
> index 3409924498e9..63ad57d95514 100644
> --- a/drivers/phy/tegra/xusb-tegra210.c
> +++ b/drivers/phy/tegra/xusb-tegra210.c
> @@ -1934,9 +1934,9 @@ static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>  			/*
>  			 * When port is peripheral only or role transitions to
>  			 * USB_ROLE_NONE from USB_ROLE_DEVICE, regulator is not
> -			 * be enabled.
> +			 * enabled.
>  			 */
> -			if (regulator_is_enabled(port->supply))
> +			if (port->role == USB_ROLE_HOST)
>  				regulator_disable(port->supply);
>  
>  			tegra210_xusb_padctl_id_override(padctl, false);
> @@ -1944,6 +1944,7 @@ static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>  		}
>  	}
>  
> +	port->role = submode;
>  	mutex_unlock(&padctl->lock);
>  
>  	return err;
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index d2b5f9565132..273af147dfd3 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -317,6 +317,7 @@ struct tegra_xusb_usb2_port {
>  	enum usb_dr_mode mode;
>  	bool internal;
>  	int usb3_port_fake;
> +	enum usb_role role;
>  };

Jonathan can we get some t-b for these two patches

-- 
~Vinod