Message-ID: <20251225142310.204831-2-krishna.chomal108@gmail.com>
Date: Thu, 25 Dec 2025 19:53:09 +0530
From: Krishna Chomal <krishna.chomal108@...il.com>
To: ilpo.jarvinen@...ux.intel.com,
	hansg@...nel.org,
	linux@...ck-us.net
Cc: platform-driver-x86@...r.kernel.org,
	linux-hwmon@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Krishna Chomal <krishna.chomal108@...il.com>
Subject: [PATCH 1/2] platform/x86: hp-wmi: add manual fan control for Victus S models

Add manual fan speed control and PWM reporting for HP Victus S-series
laptops.

While HPWMI_FAN_SPEED_SET_QUERY was previously added to reset max fan
mode, it is actually capable of individual fan control. This patch
implements hp_wmi_fan_speed_set() to allow manual control and hides
PWM inputs for non-Victus devices as the query is Victus specific.

The existing hp_wmi_fan_speed_max_get() query is unreliable on Victus S
firmware, often incorrectly reporting "Auto" mode even when "Max" is
active. To resolve this synchronization issue, move state tracking to
a per-device private context and enforce "Auto" mode during driver
initialization to ensure a consistent starting point.

Tested on: HP Omen 16-wf1xxx (board ID 8C78)

Signed-off-by: Krishna Chomal <krishna.chomal108@...il.com>
---
 drivers/platform/x86/hp/hp-wmi.c | 243 +++++++++++++++++++++++++------
 1 file changed, 199 insertions(+), 44 deletions(-)

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index f4ea1ea05997..9fb956ce809a 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -30,6 +30,7 @@
 #include <linux/rfkill.h>
 #include <linux/string.h>
 #include <linux/dmi.h>
+#include <linux/fixp-arith.h>
 
 MODULE_AUTHOR("Matthew Garrett <mjg59@...f.ucam.org>");
 MODULE_DESCRIPTION("HP laptop WMI driver");
@@ -190,7 +191,8 @@ enum hp_wmi_gm_commandtype {
 	HPWMI_SET_GPU_THERMAL_MODES_QUERY	= 0x22,
 	HPWMI_SET_POWER_LIMITS_QUERY		= 0x29,
 	HPWMI_VICTUS_S_FAN_SPEED_GET_QUERY	= 0x2D,
-	HPWMI_FAN_SPEED_SET_QUERY		= 0x2E,
+	HPWMI_VICTUS_S_FAN_SPEED_SET_QUERY	= 0x2E,
+	HPWMI_VICTUS_S_GET_FAN_TABLE_QUERY	= 0x2F,
 };
 
 enum hp_wmi_command {
@@ -348,6 +350,32 @@ static const char * const tablet_chassis_types[] = {
 
 #define DEVICE_MODE_TABLET	0x06
 
+#define CPU_FAN 0
+#define GPU_FAN 1
+
+enum pwm_modes {
+	PWM_MODE_MAX		= 0,
+	PWM_MODE_MANUAL		= 1,
+	PWM_MODE_AUTO		= 2,
+};
+
+struct hp_wmi_hwmon_priv {
+	u8 min_rpm;
+	u8 max_rpm;
+	u8 gpu_delta;
+	u8 mode;
+	u8 pwm;
+};
+
+#define RPM_TO_PWM(rpm, ctx) fixp_linear_interpolate(0, 0, \
+						(ctx)->max_rpm, U8_MAX, \
+						clamp_val((rpm), \
+						0, (ctx)->max_rpm))
+#define PWM_TO_RPM(pwm, ctx) fixp_linear_interpolate(0, 0, \
+						U8_MAX, (ctx)->max_rpm, \
+						clamp_val((pwm), \
+						0, U8_MAX))
+
 /* map output size to the corresponding WMI method id */
 static inline int encode_outsize_for_pvsz(int outsize)
 {
@@ -637,41 +665,55 @@ static int hp_wmi_fan_speed_max_set(int enabled)
 	return enabled;
 }
 
-static int hp_wmi_fan_speed_reset(void)
+static int hp_wmi_fan_speed_set(struct hp_wmi_hwmon_priv *ctx, u8 speed)
 {
-	u8 fan_speed[2] = { HP_FAN_SPEED_AUTOMATIC, HP_FAN_SPEED_AUTOMATIC };
+	u8 fan_speed[2];
 	int ret;
 
-	ret = hp_wmi_perform_query(HPWMI_FAN_SPEED_SET_QUERY, HPWMI_GM,
-				   &fan_speed, sizeof(fan_speed), 0);
+	if (!ctx)
+		return -ENODEV;
 
-	return ret;
-}
+	fan_speed[CPU_FAN] = speed;
+	fan_speed[GPU_FAN] = speed;
 
-static int hp_wmi_fan_speed_max_reset(void)
-{
-	int ret;
+	/*
+	 * GPU fan speed is always a little higher than CPU fan speed, we fetch
+	 * this delta value from the fan table during hwmon init.
+	 * Exception: Speed is set to HP_FAN_SPEED_AUTOMATIC, to revert to
+	 * automatic mode.
+	 */
+	if (speed != HP_FAN_SPEED_AUTOMATIC)
+		fan_speed[GPU_FAN] = clamp_val(speed + ctx->gpu_delta, 0, U8_MAX);
 
+	ret = hp_wmi_get_fan_count_userdefine_trigger();
+	if (ret < 0)
+		return ret;
+	/* Max fans need to be explicitly disabled */
 	ret = hp_wmi_fan_speed_max_set(0);
-	if (ret)
+	if (ret < 0)
 		return ret;
+	ret = hp_wmi_perform_query(HPWMI_VICTUS_S_FAN_SPEED_SET_QUERY, HPWMI_GM,
+				   &fan_speed, sizeof(fan_speed), 0);
 
-	/* Disabling max fan speed on Victus s1xxx laptops needs a 2nd step: */
-	ret = hp_wmi_fan_speed_reset();
 	return ret;
 }
 
-static int hp_wmi_fan_speed_max_get(void)
+static int hp_wmi_fan_speed_reset(struct hp_wmi_hwmon_priv *ctx)
 {
-	int val = 0, ret;
+	return hp_wmi_fan_speed_set(ctx, HP_FAN_SPEED_AUTOMATIC);
+}
 
-	ret = hp_wmi_perform_query(HPWMI_FAN_SPEED_MAX_GET_QUERY, HPWMI_GM,
-				   &val, zero_if_sup(val), sizeof(val));
+static int hp_wmi_fan_speed_max_reset(struct hp_wmi_hwmon_priv *ctx)
+{
+	int ret;
 
+	ret = hp_wmi_fan_speed_max_set(0);
 	if (ret)
-		return ret < 0 ? ret : -EINVAL;
+		return ret;
 
-	return val;
+	/* Disabling max fan speed on Victus s1xxx laptops needs a 2nd step: */
+	ret = hp_wmi_fan_speed_reset(ctx);
+	return ret;
 }
 
 static int __init hp_wmi_bios_2008_later(void)
@@ -2108,12 +2150,43 @@ static struct platform_driver hp_wmi_driver __refdata = {
 	.remove = __exit_p(hp_wmi_bios_remove),
 };
 
+static int hp_wmi_hwmon_enforce_ctx(struct hp_wmi_hwmon_priv *ctx)
+{
+	if (!ctx)
+		return -ENODEV;
+
+	switch (ctx->mode) {
+	case PWM_MODE_MAX:
+		if (is_victus_s_thermal_profile())
+			hp_wmi_get_fan_count_userdefine_trigger();
+		return hp_wmi_fan_speed_max_set(1);
+	case PWM_MODE_MANUAL:
+		if (!is_victus_s_thermal_profile())
+			return -EOPNOTSUPP;
+		return hp_wmi_fan_speed_set(ctx, PWM_TO_RPM(ctx->pwm, ctx));
+	case PWM_MODE_AUTO:
+		if (is_victus_s_thermal_profile()) {
+			hp_wmi_get_fan_count_userdefine_trigger();
+			return hp_wmi_fan_speed_max_reset(ctx);
+		} else {
+			return hp_wmi_fan_speed_max_set(0);
+		}
+	default:
+		/* shouldn't happen */
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static umode_t hp_wmi_hwmon_is_visible(const void *data,
 				       enum hwmon_sensor_types type,
 				       u32 attr, int channel)
 {
 	switch (type) {
 	case hwmon_pwm:
+		if (attr == hwmon_pwm_input && !is_victus_s_thermal_profile())
+			return 0; /* Hide PWM input if not Victus S */
 		return 0644;
 	case hwmon_fan:
 		if (is_victus_s_thermal_profile()) {
@@ -2134,7 +2207,12 @@ static umode_t hp_wmi_hwmon_is_visible(const void *data,
 static int hp_wmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 			     u32 attr, int channel, long *val)
 {
-	int ret;
+	struct hp_wmi_hwmon_priv *ctx;
+	int current_rpm, ret;
+
+	ctx = dev_get_drvdata(dev);
+	if (!ctx)
+		return -ENODEV;
 
 	switch (type) {
 	case hwmon_fan:
@@ -2147,16 +2225,21 @@ static int hp_wmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 		*val = ret;
 		return 0;
 	case hwmon_pwm:
-		switch (hp_wmi_fan_speed_max_get()) {
-		case 0:
-			/* 0 is automatic fan, which is 2 for hwmon */
-			*val = 2;
+		if (attr == hwmon_pwm_input) {
+			if (!is_victus_s_thermal_profile())
+				return -EOPNOTSUPP;
+			ret = hp_wmi_get_fan_speed_victus_s(channel);
+			if (ret < 0)
+				return ret;
+			current_rpm = ret;
+			*val = RPM_TO_PWM(current_rpm / 100, ctx);
 			return 0;
-		case 1:
-			/* 1 is max fan, which is 0
-			 * (no fan speed control) for hwmon
-			 */
-			*val = 0;
+		}
+		switch (ctx->mode) {
+		case PWM_MODE_MAX:
+		case PWM_MODE_MANUAL:
+		case PWM_MODE_AUTO:
+			*val = ctx->mode;
 			return 0;
 		default:
 			/* shouldn't happen */
@@ -2170,23 +2253,50 @@ static int hp_wmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 static int hp_wmi_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
 			      u32 attr, int channel, long val)
 {
+	struct hp_wmi_hwmon_priv *ctx;
+	int current_rpm, ret;
+
+	ctx = dev_get_drvdata(dev);
+	if (!ctx)
+		return -ENODEV;
+
 	switch (type) {
 	case hwmon_pwm:
+		if (attr == hwmon_pwm_input) {
+			if (!is_victus_s_thermal_profile())
+				return -EOPNOTSUPP;
+			/* pwm input is invalid when not in manual mode */
+			if (ctx->mode != PWM_MODE_MANUAL)
+				return -EINVAL;
+			/* ensure pwm input is within valid fan speeds */
+			ctx->pwm = RPM_TO_PWM(clamp_val(PWM_TO_RPM(val, ctx),
+							ctx->min_rpm,
+							ctx->max_rpm),
+						ctx);
+			return hp_wmi_hwmon_enforce_ctx(ctx);
+		}
 		switch (val) {
-		case 0:
-			if (is_victus_s_thermal_profile())
-				hp_wmi_get_fan_count_userdefine_trigger();
-			/* 0 is no fan speed control (max), which is 1 for us */
-			return hp_wmi_fan_speed_max_set(1);
-		case 2:
-			/* 2 is automatic speed control, which is 0 for us */
-			if (is_victus_s_thermal_profile()) {
-				hp_wmi_get_fan_count_userdefine_trigger();
-				return hp_wmi_fan_speed_max_reset();
-			} else
-				return hp_wmi_fan_speed_max_set(0);
+		case PWM_MODE_MAX:
+			ctx->mode = PWM_MODE_MAX;
+			return hp_wmi_hwmon_enforce_ctx(ctx);
+		case PWM_MODE_MANUAL:
+			if (!is_victus_s_thermal_profile())
+				return -EOPNOTSUPP;
+			/*
+			 * When switching to manual mode, set fan speed to
+			 * current RPM values to ensure a smooth transition.
+			 */
+			ret = hp_wmi_get_fan_speed_victus_s(channel);
+			if (ret < 0)
+				return ret;
+			current_rpm = ret;
+			ctx->pwm = RPM_TO_PWM(current_rpm / 100, ctx);
+			ctx->mode = PWM_MODE_MANUAL;
+			return hp_wmi_hwmon_enforce_ctx(ctx);
+		case PWM_MODE_AUTO:
+			ctx->mode = PWM_MODE_AUTO;
+			return hp_wmi_hwmon_enforce_ctx(ctx);
 		default:
-			/* we don't support manual fan speed control */
 			return -EINVAL;
 		}
 	default:
@@ -2196,7 +2306,7 @@ static int hp_wmi_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
 
 static const struct hwmon_channel_info * const info[] = {
 	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT, HWMON_F_INPUT),
-	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_ENABLE),
+	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_ENABLE | HWMON_PWM_INPUT),
 	NULL
 };
 
@@ -2211,12 +2321,55 @@ static const struct hwmon_chip_info chip_info = {
 	.info = info,
 };
 
+static int hp_wmi_hwmon_setup_ctx(struct hp_wmi_hwmon_priv *ctx)
+{
+	u8 fan_data[128];
+	u8 (*fan_table)[3];
+	u8 rows, min_rpm, max_rpm, gpu_delta;
+	int ret;
+
+	/* Default behaviour on hwmon init is automatic mode */
+	ctx->mode = PWM_MODE_AUTO;
+
+	/* Bypass all non-Victus S devices */
+	if (!is_victus_s_thermal_profile())
+		return 0;
+
+	ret = hp_wmi_perform_query(HPWMI_VICTUS_S_GET_FAN_TABLE_QUERY,
+				   HPWMI_GM, &fan_data, 4, sizeof(fan_data));
+	if (ret != 0)
+		return ret;
+
+	rows = fan_data[1];
+	if (2 + rows * 3 >= sizeof(fan_data))
+		return -EINVAL;
+
+	fan_table = (u8 (*)[3]) & fan_data[2];
+	min_rpm = fan_table[0][CPU_FAN];
+	max_rpm = fan_table[rows - 1][CPU_FAN];
+	gpu_delta = fan_table[0][GPU_FAN] - fan_table[0][CPU_FAN];
+	ctx->min_rpm = min_rpm;
+	ctx->max_rpm = max_rpm;
+	ctx->gpu_delta = gpu_delta;
+
+	return 0;
+}
+
 static int hp_wmi_hwmon_init(void)
 {
 	struct device *dev = &hp_wmi_platform_dev->dev;
+	struct hp_wmi_hwmon_priv *ctx;
 	struct device *hwmon;
+	int ret;
 
-	hwmon = devm_hwmon_device_register_with_info(dev, "hp", &hp_wmi_driver,
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ret = hp_wmi_hwmon_setup_ctx(ctx);
+	if (ret != 0)
+		return ret;
+	hwmon = devm_hwmon_device_register_with_info(dev, "hp", ctx,
 						     &chip_info, NULL);
 
 	if (IS_ERR(hwmon)) {
@@ -2224,6 +2377,8 @@ static int hp_wmi_hwmon_init(void)
 		return PTR_ERR(hwmon);
 	}
 
+	hp_wmi_hwmon_enforce_ctx(ctx);
+
 	return 0;
 }
 
-- 
2.52.0

Powered by blists - more mailing lists