linux-kernel - [PATCH v4 5/7] dt-bindings: pinctrl: rockchip: Add rk3506 rmio support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251227114957.3287944-6-ye.zhang@rock-chips.com>
Date: Sat, 27 Dec 2025 19:49:55 +0800
From: Ye Zhang <ye.zhang@...k-chips.com>
To: Ye Zhang <ye.zhang@...k-chips.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Heiko Stuebner <heiko@...ech.de>
Cc: Bartosz Golaszewski <brgl@...ev.pl>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	linux-gpio@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	tao.huang@...k-chips.com
Subject: [PATCH v4 5/7] dt-bindings: pinctrl: rockchip: Add rk3506 rmio support

The RK3506 SoC introduces a secondary block-level pinmux controller called
RMIO (Rockchip Matrix I/O). When the primary IOMUX is selected to a
specific function, the pin signal is routed to the RMIO block, where a
secondary selection determines the final function.

This patch adds the necessary properties to support RMIO:
- rockchip,rmio: phandle to the RMIO syscon node.
- rockchip,rmio-pins: a matrix to configure the RMIO block.

Signed-off-by: Ye Zhang <ye.zhang@...k-chips.com>
---
 .../bindings/pinctrl/rockchip,pinctrl.yaml    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
index 97960245676d..887bec22b172 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -66,6 +66,13 @@ properties:
       Required for at least rk3188 and rk3288. On the rk3368 this should
       point to the PMUGRF syscon.
 
+  rockchip,rmio:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the RMIO registers, used by
+      some SoCs (e.g. rk3506) to configure the secondary block-level
+      pinmux functions.
+
   "#address-cells":
     enum: [1, 2]
 
@@ -144,6 +151,23 @@ additionalProperties:
                 The phandle of a node contains the generic pinconfig options
                 to use as described in pinctrl-bindings.txt.
 
+      rockchip,rmio-pins:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        items:
+          items:
+            - minimum: 0
+              description: RMIO ID (Controller index)
+            - minimum: 0
+              description: Pin index within the RMIO controller
+            - minimum: 0
+              description: Function Mux ID
+        description:
+          Configuration for the Rockchip Matrix I/O (RMIO) block. The format
+          is <rmio_id pin_id function_id>. This acts as a secondary muxing
+          layer when the primary 'rockchip,pins' mux is set to the RMIO
+          function.
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
2.34.1